MENSI One Pound Propane Tank Low Pressure Adjustable Gas Regulator with 1/4” Barb Hose Connection (Outlet 1/4" Barb=6.35MM)

WOW! Works great and at a perfect price!

This item gave me the control I needed for my lab bench burners. Works perfectly

After that, everything worked fine. I suggest buying this hose from amazon.com to fit a standard 15-lb tank and save serious $$$: https://www.amazon.com/DOZYANT-Converter-Replacement-Connects-Appliance/dp/B06Y5XFF6F/ref=sr_1_3?dchild=1&keywords=propane+tank+hose&qid=1592584088&sr=8-3

Bought two.....neither one puts out enough gas to make the burner on my Century stove more than a pilot light. Not sure why.....using 1lb coleman tanks and a century camp stove. Almost zero gas output. Any ideas??

This is the perfect pressure regulator for a small Bunsen burner, and the best price. I thought I was going to have to put a secondary flow valve on the line, but the adjustment range on this regulator is spot on by itself.

I bought this so I could run both of my Bunsen Burners off a standard 20 pound propane barbecue tank. It works well. You get good pressure, but not too much to cause the flame to leap away from the base of the burner itself. I get a nice clean bright blue flame from both burners.

pretty cheap, worked for a little while very well, and then just nothing.

The hose barb was advised as 1/4 inch, mine was not, it was alot smaller, so i had to cut my 15 dollar hose to attach it, it goes onto the propane bottle very easily, the regulator works like you would expect, the unit works good, no black sooty yellow flame, im just not thrilled about cutting my new hose.

Je l'ai installer sur mon BBQ installation et rendement vraiment OK

Works great for converting a "Bud E" cooker to run off 1 lb disposable or 20 lb with adapter. This regulator provides .65 psi on high, the Bud E can accept up to 1 psi, so losing a bit of heat on Max, but still works very good. I used automotive air line crimp clamps, doubled up, looks pretty seamless, with no hang ups like a screw clamp. Replaced the Bud E quick connect with a 1/4 Male Pipe Thread 1"-20 Female Throwaway Cylinder Thread Propane Adapter Fitting. $12.99. Cut a 20lb to 1lb 5 ft. hose to clamp onto regulator hose barb. Available now for $17.99. This regulator has worked great for 2 months of almost daily use, and allows a great cooker to be used without it's very pricey "master" heater.

The part is well made. It is doing what it was supposed to do. I bought this one to replace my broken valve and so far so good.

The knob is quite flimsy.