Led Aluminum Channel with Milky White Cover for 12mm Led Strip Lights, 10Pack 1m/3.3ft U Shape Led Profile Diffuser with End Caps, Metal Mounting Clips and 90 Degree Corner Connector

The quality of the product was really substantial considering it's size and the covers either slide on or push on; once together they look really smart; I was really pleased. I used 60 leds to the metre inside and the diffuser has been excellent at lighting up a large piece of glass art, whatever colour the lights are set on. The channel easily took the 12mm strip. The ss clips work well although for some I have drilled through the base of the channel and used a screw and put the strip on top. The end caps fit well, with a small hole for a wire (although of course led strips have a four pin connector on and so you have to cut a slot if you want to use the end cap as the connector won't go thru the hole).

Very sturdy. Although no instructions included in the box...they are online in the amazon section. I had to fit 7.5m across 3 walls. I purchased a 10m pack of this trunking...7.5m of LED lights and an extension lead. My advice is to 'measure twice cut once'. Use a good quality hacksaw for mitring corners. Cheap bladed saws bend and give a poor cut finish. Listen...you can use the screws and wall plugs included. I drilled my first hole and stopped. Couldn't bare having upto 20 holes in the top of.my wall which will need patched in in years.to come. Sorry to.mentiom another product here but I used size small command strips...the white velcro ones. I cut them in half length ways and used two per length of conduit. No mess. No fuss. So o recommend fitting with command strips. On the negative side...but could be a plus...it is tricky to click the plastic diffuser cover on. However...there is a knack to it...once u work it out it fits OK. I used the handle side of a pair of large scissors to force once side in. Easier shown than explained. Now I've done 1 room...I will have no issues doing more. A good product.

I bought this to fit onto the back of my office desk and also to go under the kitchen cabinets. The quality of these is very good, easy to cut to length - I used strong double sided tape to fix but you get fixing in the box if required. My LED strip fitted nicely inside and the plastic diffuser just slides into place and gives a nice soft glow to the LED strip rather than seeing the harsh spots you normally get. Not a cheap product but if you want a nice looking LED installation then it's totally worth it. The only thing that could make this better would be if you had corner pieces to make jointing easier.

Given how cheap these are, I expected a pretty low quality product, but these are pretty good. The aluminium extrusion is almost perfect, mine had some very minor bending, but nothing that caused any issus, easily corrected and was so slight you couldn’t tell just by looking at it. The kit includes everything you need including, diffusers a big pack of screws and endcap’s and the aluminium is very accurately cut to 1 m lengths . The only negative comment is the width shown in the image are not completely accurate, I found the width of the extrusion to be over 1 mm wider than indicated. So measure the width carefully if that dimension is important to you .

I bought a 5m LED strip from Lidl and was looking for a good way to mount it on a ceiling. Came on Amazon, did a search and found this product. Fixed a piece of strip wood to ceiling (to aid installation), attached the clips provided to the strip wood, clipped the channel into the clips, fixed the LED tape, end caps and clear plastic cover, et voila fantastic professional looking installation. After reading other reviews, I made good use of the plentiful supply of channel clips (I used 5 per Meter long channel) including 1 at each end of the channel, butt jointing 2 channels into 1 clip and have had no issues with stability etc. I am very pleased with the outcome, wish I had have bought the LED strip light online as well as the one I had, had a couple of small sections where the LED's were not fully functional.

I got this channel to mount in the corner of a room to emphasize shape around a fireplace alcove. While turned off, the channel is barely noticeable between our green and peach walls. While turned on the milky white plastic helps to take the edge off the LEDs, full brightness is still a little sharp but utilising a cheap dimmer switch and bringing the lights down to around 60% makes a lovely inoffensive ambient light that isn't harsh to look at directly. This channel was the only one I found on Amazon that I felt was suitable and I wasn't disappointed. It's easy enough to cut to size using a junior hacksaw.

For the price I didn't think this would be great quality and saw some reviews about bits arriving broken. However, it arrived very well packed with no breakages and is of good quality. The frosted covering is easy to fit as are the clips and end caps. Overall, very pleased with the finished installation of under cupboard lighting.

I used this to hold innr smart lights on the underside of my velvet bed. They hadn’t stuck very well and were kicking around on the floor. My lights didn’t stick but they’d already lost their stick and we’re covered in fluff. It didn’t matter there was no need to stick as the cover held them in place. The clips were hard to get in partly because I’m suffering from vertigo and had to be upside down and I was screwing into upholstered velvet. Not a fault of the product but they did it. The clips held well I put in as few as possible because it’s under the bed and not seen and I’m not feeling well but quite adequate. I chucked away the white end caps I couldn’t see how you could use them as the wire wouldn’t go through the hole. They gave plenty of different sized screws, raw plugs and clips. The cover I cut with scissors I might have sawn it if I was putting it somewhere you could see it as it bends the ends slightly. The aluminium pieces were easy to saw, but do need the proper saw. Made a lovely neat job and my bedroom is looking beautiful, Just need to get some flooring and it will shoe off the lights better :-).

Der Artikel entspricht genau der Beschreibung. Versand und Verpackung war einwandfrei. Schrauben / Dübel für die Halteclips sind nicht enthalten. Die Halteclips einfach an die vorgesehene Stelle anbringen, die Schiene einklicken, dann den LED Streifen anbringen. Die Blende dann einfach einklicken "nicht schieben" Würde den Artikel sofort wieder kaufen.

Strisce led alla portata di qualsiasi tasca, 5 metri di ottimo prodotto, che non so come facciano a vendere a questo prezzo, visto che in negozio ne vendono un metro solo a questo prezzo qui. Imballaggio strepitoso visto il prodotto...ci si mette mezzora per sballarle, per quando sono protette bene. Sono facilissime da installare, ovviamente con la striscia led della dimensione giusta, che troverete ovviamente su amazon. Il risultato è garantito comunque, andate sul sicuro prendendole.

Mise en place facile, bonne qualité, bien rigides, espace bien dimensionné pour insérer une rampe de leds 5050, maque juste les vis pour les fixer, mais comme ça dépend de chaque installation, on comprend que ça ne soit pas fourni.

Mise en place facile et rendu de qualité.

Muy buena calidad precio para estos diez metros de perfil. Los tacos que traen no los utilicé, ya que eran algo endebles para donde los iba a poner. Pero por lo demás, el producto es de buena calidad. Los leds quedan geniales. Antes tenía las tapas transparentes para ver los leds, pero ahora he puesto unos más potentes, y con la carcasa lechosa se difumina mucho mejor. Muy recomendado.