Zhiyun Z1-Pround 3-Axis High-Precision Handheld Steady Gimbal PTZ Camera Mount with Built-In Independent IMU Module Stabilizer Extra Power Charger for GoPro Hero 1/2/3/3+/4 - Silver/Black

Description

Specifications: Working voltage: 8.4V Working current: 120mA Battery Capacity: 2000mAh (18650 LIPO) Works with 18650 and 18350 LIPO batteries. (18350 not included.) Tilt Working Angle:-180 ~ 180 (vertical handheld) Roll Working Angle: -45~ +35 Heading Working Angle (vertical handheld): -135~ +135 Heading Working Angle (leveled handheld): -45~ +45 Max Battery Operation Times (25C, 2*900mAh): 12h Operation Temperature: -20C ~ +45C Weight: 335g / 12oz Three operation modes: When in Heading Following Mode, the indicator blink slowly. Pitch and roll are rocked. Heading rotates smoothly follow the direction of the handheld. When in Locking Mode, the indicator light up. Pitching and roll are locked. When in Heading and Pitch Following Mode, the indicator blink quickly. Roll is locked. Heading and pitch rotate smoothly follow the direction of the handheld. Operation: Power Switch: Install the battery and press the power button, the stabilizer will in standby mode after 5 seconds. Press the button again to cut off power. Note: In following situation, please do calibration again. (Procedures shown on the manufacturer's website) 1. Opening the handheld gimbal with horizontal deviation. 2. Not using the handheld gimbal for a long time. 3. The emperature variation change too much. Please don't operate the handheld gimbal over working range. Box Contains 1 * 3-Axis Handheld Gimbal Camera Stabilizer 1 * Camera Holder 4 * Screws 2 * 18650 LIPO Battery 1 * Battery Charger 1 * USB Cable 1 * Warranty Card 1 * User's Manual