SWIMLINE HYDROTOOLS 52000 Premium Solar Reel System For Above Ground Swimming Pools | Durable | Non-Corrosive | Socket Mountable | With Straps & Hardware | Easy Cranking | TUBE KIT NOT INCLUDED

It took some time, but I installed this reel system with their recommended pole. I mounted the actual reel system on two 4' x 4' five foot high pressure treated wooden posts, as I have an INTEX ultraframe pool, and cannot mount to an edge. These posts are at the end of the pool, 2 feet away, where I can still reach the solar blanket to pull it over the pool. I drilled holes in the base of the reel mechanism and then screwed these reels to a wood platform that then goes on top of the 4 x 4 post. Turn handles are screwed to the collar that holds the actual pole, so that nothing moves, then the pole is screwed to that collar. So there is definitely no wobbling or shifting. It took careful measuring to get the length of the poles correct. You need to drill holes in the poles to keep in place together, and for the end keeper plates and straps for the solar blanket-measuring for these also. I did not use their end predrilled plates to hold down the reels. I may put rubber bushings on my reels' bottoms where I drilled and screwed- so that they do not crack on the wood platform I made for each. These reels move beautifully! No struggle whatsoever rolling out the solar blanket onto the pool, or rolling it back up onto the pole again. After taking the time to configure my own pool situation, I am very happy with this product!

Owned 1 week. Also purchased the hydrotool pole (54000). Received defective product at first (plastic was molded out of shape not allowing reel to roll). Amazon was great replacing with 1 day shipping. Replacement worked perfect. The instructions aren't great, but installed within 2 hours. I have a 21' round pool so installed right down the center. Rolling the cover up is incredibly easy (about 20 seconds). I love how the reel swivels right and left and open at the top so you can lift the pole up to remove it completely. Cranks on both ends will be useful if someone else wanted to help, but it's easy to roll by myself. Any debris on top of the cover goes in the water when you roll it up, but that's with any solar reel on a round pool. It's too early to speak to the durability of the resin/plastic, but it seems strong; doesn't bend as I crank the cover on/off. Putting the cover back on is not so easy. With the pole in the middle, the cover should unroll on both sides. Instead, the cover sticks to the other side and both sides roll out to just the right. I use my skimmer pole to separate, but it's easier to be in the pool when you start unrolling it. Once you get it started, it's goes pretty smooth. It takes me about 3-5 mins to get the cover back on by myself. I've noticed my cholrine is lasting longer compared to when I didn't use my solar cover. Overall, worth the money and I'm now using my solar cover all the time (I used to not ever want to mess with it). This will definitely give me more swimming time in the season.

This reel system is a great option for the price. The installation was simple and the included instructions are clear. I only had one issue installing it - the small rollers which go into the stands were a bit large and would not spin when inserted (in fact, most would not fit). I had to cut them down just a small bit with a razor blade and they went in just fine. Once I put together the pole kit and straps, it worked great. I did have to tap a few stainless steel screws into each assembly and down into the pole to keep the handles from slipping.

We have had this reel system for the solar cover for two summers on our 16-feet diameter Intex pool. We mounted the brackets to 4x4 treated posts and zip-tied them to two pool supports. We use Gorilla tape and stainless steel screws to keep the center section of the pole from sliding back and forth inside the end sections of the aluminum pole. The stainless steel screws held up but the rotation of the pole pulling the wet solar cover puts a lot of strain on those connections. The handles on the ends appear to be pvc and these usually fell off and broke or broke and fell off often. I tried using Gorilla glue to mend them, but alas the handles were rendered useless by the middle of the second season. Perhaps the sun breaks down the pvc and makes them brittle. The system was a good value and it is attractive and easy to work with since the two-piece pvc brackets pivot. Even a small woman can easily remove the cover by herself. I could put it back onto the brackets by myself, but unrolling the cover and getting it spread out evenly on the pool was much easier with two people.

It is a good product.especially for unrolling the cover. Takes about thirty seconds to cover the pool . A little tricky on rolling it up , but that’s where the round cover makes it harder. You have to fold the two sides in because of the width. Mine is a 24 ft pool above ground. I have no trouble now operating it alone. I recommend it fully. I used tech screws on the pole , along with 3/16 pop rivets at the joints.

Reel works well. Solar cover winds up easy. Somewhat difficult to unwind with one person but can be done. Two people is easier.

Bought this product a year ago and finally got the gumption to put it in. Mounted their hardware to a 4 x 4 post which I put down into the ground 3 feet used their pole kit as well which came with all the clips and Velcro tape. By adding a noodle that I zip tied onto the end of the Solar cover and now it’s very easy to get the cover on and off. I’ll most likely remove most of the plastic pieces except for the main mount tubes for the fall and winter. Great product for my above ground 12’ pool!

Alles wie beschrieben

Easy to assemble. Happy to find this for my existing pool cover reel. Works perfectly.

consegui el tubo aparte pero me gusto el precio y si funciona.

It was a quality product. Exactly was was required for my existing cover and pole and delivered on time

Alles Bestens