Nordic Ware Tiered Cake Pop Display Stand, White, Holds 37 pieces

I've taken more measurements to help with other's decisions, since I really needed them when I was deciding. I agree with the 9.1-inch measurement inside the exact bottom of the dome BUT notice there is a constant slope that begins immediately. At the place where you see the very top of the upper shelf shown in the photos, the measurement across the inside of the dome is 8 9/16th inches. So, about a half-inch less width at that point. This slope is going to make a difference to some 8-inch cakes, depending upon how much decorating at the top outer edge of the cake, whether you are using a plate or just a thin board, and how tall the cake is. I believe this will work for my purposes. I almost always make 3-tier 8-inch cakes, decorated. So larger-based domes I liked seemed too low in height to be confident buying them. However, with this dome I will be cautious how wide my frosting/piping is at the top of the cakes - maybe putting top edge piping on the actual top of the cake, not around sides. I'd like to think I can make 4-tier cakes and still display in this if I really want, but it could be tight. The height of a cupcake or treat set on the lower level can be 4.25 inches. The height on the upper shelf is perhaps the same in the very middle, but of course less for the rest. It will definitely be attractive for cupcakes, and I'll say it has surprised me with thinking about making them more often. A disappointment I hadn't thought of - my various pretty "9-inch" plates I sometimes use for cakes won't work. Even the one that is smallest still has a raised lip, and since a lip is slightly above the surface, it won't fit because of the slope - aw, so close! I have fewer "8-inch" plates I like for cakes, but they do work, of course. I just wonder if cakes will look the way I expect on those. I have a feeling I'll be using cake boards, which is fine. There were no scratches on the dome and nothing was broken - well packaged in a plain square cardboard box with NordicWare emblem/name. Right out of the box there was a slight off-gassing odor from the dome only, that I believe is fixed after soapy hand-washing. As other reviewers have said, this won't work as a carrier at all, and won't work for 9-inch cakes. All in all, I'm pleased, and since I already knew the limitations, I'm giving this 5 stars. I don't think you could give it as a gift, though, unless you knew the person's specific likes.

Perfect for cake pops or fruit skewers. Well made, sturdy, durable, and easy to clean.

I like this stand very much. It feels plenty sturdy to me, and the holes are 5mm in diameter, so they fit a standard lollipop stick pretty well - not perfectly, since a typical stick is 4mm thick and will wobbly slightly in the hole. The spacing between pops is, again, pretty good. My cake pops are slightly over 1-1/2" in diameter--some of the ones shown are almost 1-5/8". As you can see in the second photo, some of the pops bump into each other slightly if they lean over in just the wrong direction, especially on the bottom row, since there is an extra outer ring of pops on the bottom. In the third photo, I've adjusted them so they don't touch, but as people reach for them at a party, the pops are sure to bump a little if they're more than, say, 1-1/4" in diameter. It's not enough to mar each other, however, so it shouldn't be a problem as long as the pops have dried completely. Also, if you used 4" sticks for the very outer ring and 6" sticks everywhere else, they would be far less likely to bump into each other. I'm very happy with this stand, and it really does hold 37 cake pops with only a 10" footprint. I totally recommend it.

I got it for lollipops. The holes are a bit too big for lollipops, because this product is meant for pop cakes, which have thicker sticks. It still works well and is very sturdy! Recommend!

PERFECT! Displayed my cake pops beautifully. Note in order for your cake pops to sit securely make sure you buy wilton cake pop sticks or anything that has a similar thickness. There are some cake pop sticks that I have that are too thin and will make your cake pop tilt. I used 4 inch long sticks in the picture above and it made my display look nice and full.

I use this all the time when I make cake pops and I use it to travel as well so it keep the cake pops in place when the car is moving all the time. I love how sturdy and easy to clean it is, it looks presentable for nice events and loved it so much I bought another one! Great product!!

Awful - I thought it was cute & I got it for a present. Once she used it, we discovered the holes are much too shallow and cakepops just fall over. Plus it does not fold down like I was hoping it would. Since I put it aside to give away as a present, I'm outside the return window so I'm throwing away this piece of crap.

Highly recommend !! I’m no professional! I make cake pops for family (birthdays, Halloween etc) this stand is perfect! I put a cake pop stick in the top center and the balloon stick fit perfectly over it!!

Cómo en la foto es muy hermoso el colormuy bonito excelente para postres y si le quitas el tubo de enmedio sirve para pastel chico , le cabe un pastel peque tipo Ferrero Rocher marca Divinata los de mty sabrán

Es un producto que ayuda en la presentacion de las cake pops. Es de un buen material pero cuando entran adornos o chocolate de las cake pops en los orificios de la base es algo dificil sacarlos. El tamaño es adecuado para la presentacion de las cake pops y no se le adhiere tan facilmente los restos de las decoracione.

Looks great to present cakepops. Sturdy.

Perfect display for bake sale

Me encantó lo práctico del producto! Especial para mesa de postres en las fiestas. Lo recomiendo porque además está a buen precio