uxcell 10 Pcs PG9 White Plastic Waterproof Cable Glands Joints

I bought these to mount an LEDwholesalers 10W outdoor flood light outside of my house. The light comes with an attached cable (with bare ends) that needs to be wired into an electrical box. I wanted the cable gland to provide a clean seal for the wire, and the white matched the electrical cover nicely. The cable is about 7mm in diameter, so I originally bought the Amico PG10, which lists a cable range of 5mm-10mm. Well, the Amico glands would appear to run large, as the PG10 size was too large to get a good seal on my 7mm power cable. Technically it was possible, but required the gland to be tightened down all the way, which made the rubber seal and flanges protrude out of the nut. The PG9 size is better for 7mm, and can get a nice fit around the 7mm cable without being screwed all the way down. The specs for the PG9 say that it can be used for a 4mm cable--I would not recommend it for 4mm. I think 6mm is on the low end, and 5mm would be the absolute smallest I would be comfortable with. I drilled a hole in my electrical light cover plate, attached the gland, and screwed it on, and it works great. After installing the gland, I put a little bit of silicone caulk around the gland on the outside and inside of the cover plate, just to seal out any moisture. You could probably find a gasket, but silicone worked fine for my purposes.

Not really a lot to say other than good quality product and works just as would be expected.

These perform well but not weather proof until I added gaskets to the base. Overall a good product and seller was truthful. I just didn't pay attention to the add.

These have a terrible gasoline-like chemical smell that does not go away.

These are great! Heavy duty!

I agree that they should have come with sealing washers. Now I have to buy a bag of those. Other brands come with them.

Used these to run my solar cable into my combiner box. Worked great.

These are great for wiring LED floodlights with bare wire leads (or plugs) to normal outdoor electrical boxes with blank sides. Drill hole, install gland, insert wire, clamp down gland. Weatherproof installation with no trouble.

Bought this for a project and never used it. Kept it anyway for future use. Very well made.

Very pleased with the quality of these cable glands. Good value for money. No problems at all. Thanks.

Pas évident de trouver la bonne taille mais j'ai pu l'adapter. il m'aurait fallu du PG11. je l'ai reçu très rapidement et le plastique est de bonne facture.

防水部やネジ部のつくりも確りしており、DIYにはとても重宝です。

Bought these for those flexes a bit thicker than what PG7 size can handle - so not used yet. But, they are better described as pale grey/blue (sort of bird-egg!) colour, which might look amateurish mounted on ivory/white boxes/lids.