Frankford Arsenal Platinum Series Case Trim and Prep System with Hardened High Speed Steel Chamfer Debur Tool and Primer Pocket Scrapers with Trimmer

Great product! It worked good for me and saved a little of time in prepping cases for reloading.

Let me start by saying, for the reviewers that write one star reviews because they are missing something, STOP IT...thats not the purpose of reviewing and these are assembled by humans, and humans can tend to make mistakes... I almost questioned whether to buy this because of the reviews about runout on the shafts, the difficulty of consistency of having brass fired from different guns, ect...they me tell you...DONT LISTEN TO THEM! This product is awesome for what is for, rapid case trimming for brass...if you are a match shooter or think you are a match shooter...use a hand trimmer...this is not meant for exact tolerances...that being said, I was pleasantly surprised that after 500 cases of .223, fired from various rifles, and checking randomly I was wishing .0002 in tolerance...totally good enough for my purposes. I have owned a RCBS trimmer since I got my first reloader 20 years ago...I have never trimmed my brass! I always would start it and after about 10 I had better things to do...and never had any real problems...I decided to check this batch of 1000 and found some of them were pretty long! and 95% were over a little...I dug out the hand trimmer, attached a drill and after 10 was done with this process... Looking around I didn't want to spend $500 on a trimmer (correction...wife wouldn't allow me to spend $500 on a trimmer!) and I came across this...having just purchased the FA Tumbler (awesome BTW over vibration and ultrasonic) I decided to make this purchase...and I don't regret it... As many have said, trimming cases is worse than watching paint dry, however I don't see any other product out there that can make you more efficient than this, I didn't have a grip issue...its really easy to use and set up, I was up and running out of the box in 10 min! It is about as loud as my can opener in the kitchen so my wife allows me to do this in the house (thank god since I live in Phoenix and its about 120 degrees in the garage!). Other negative reviews I have read: Inconstant length - If you read the manual (I know...heaven forbid) it states to turn the case a quarter of turn clockwise after it stops cutting FOR AN EVEN CUT...I did and it works, I always hear it snip a little more when I turn it. The tool heads are junk - Working fine for me...you are cutting brass, which is like hot butter in the metal world...doesn't take much to cut it Runout on the tool heads - And? So what...your holding the casing in your HAND, its not a stationary lathe...the case will move with the small amount of runout and what micrometer it will be off my crimp die takes care of when I put them in the press... As another review said...JUST BUY IT and you will be happy!

Product is great and couldn't be happier which is for the 5 starts. Shipping/handling I would give 2 stars . You would have thought it would have been placed inside an Amazon box( my Hornady AP that was delivered the same time) but this was sent in its original packaging. This had more dents than a Nissian Altima driven by a teenager and the lid to the package was unsecured and looked to have been opened in transit. Luckily, the contents are there and product is fine. I'm just one of those people that like to retain the original packaging for later use. Just be aware if you order that it might arrive like this.

Really like this product so far, bought it mainly for the trimming feature. The heft of it feels build strong, noise level is ok to deal with, sure better than a hand drill. The motor does have pretty high torque, and trends to spin the brass out of your hand, and after a while, your hand does get tired, just like from using the drill, I can see it would be really hard for short rifle brass. I found two ways around this. 1. use a bionic wrench to hold the brass, it basically holds brass from few contact points and it's self adjustable. Pressure spreads out evenly and would not mar the brass, easy on the hand. 2. Use a needle nose pliers with builtin wire cutter, put the shell inside circular cutout on the back of the cutter. Line the contact surfaces with some tape for extra grip. OAL length of trimmed brass does vary a little from different headstamps, because it's head spaced on shoulder instead of actual shell length. You have to feel for when trimming is done, since the motor is somewhat slow. Overall design is good, has that little storage box build in, good to have everything on the unit, instead of hunting for parts. There's not a good way to clean brass trimming however, they fell through the holes on the trim holder. It should comes with crimp remover instead of the primer pocket cleaner in my opinion, just another extra piece to purchase. Overall this is the best design in the price range, others either don't have the trimmer, or just cost more, like WFT. It's better than using a drill, as there's no need to swap tools between operation, like a single stage vs turret press.

Excelente Ajudou muito

I should have bought one years ago. Quiet enough to run without annoying the neighbours and powerful enough to get the job done. In the UK this US version runs from my UK 110V site transformer with the correct fly lead and RCD that I already had.

Works great and very accurate , make sure to warm it up for a few hours, keep it away from air draft , Had a problem with the first one but Frankoford Arseneal's customer service is amazing and they sent a replacement under a week , and I'm in Canada, definitely recommended.

Super gelaufen. Alles was auf dem Foto war ist im Set enthalten gewesen. Schnelle Lieferung zwar mit 30 Euro Aufpreis aber egal. Das Gerät hat 110 Volt und einen US Stecker. Wenn man aber nicht auf den Kopf gefallen ist kauft man sich einfach einen Umwandler für 40 Euro und spart sich mit dem ganzen Set inkl dem Wandler mindestens 200 Euro im Vergleich zu den Geräten was es hier in D zu kaufen gibt. Die selben Geräte nur mit EU Ausführung kosten hier ca 440 bis 500 Euro. Heute Abend probiere ich aus wie es funktioniert. Wie gesagt alles was auf den Fotos zu sehen ist ist auch im Set.

This makes case trimming and primer pocket reaming a cake walk compared to using a drill like i was doing before. Additionally, I would like to praise Frankford arsenal work not price gouging customers as others have on Amazon. this product has increased in price 23% in 2 years which is fair, compared to some Lee components I have bought that have went up over 60% in a few months.