Single LCD Computer Monitor Free-Standing Desk Stand Riser for 13 inch to 32 inch Screen with Swivel, Height Adjustable, Rotation, Holds One (1) Screen up to 35kgs

This monitor stand is excellent value for money. It's super easy to assemble. They provide lots of bolts and washers so it was a bit of a trial and error first, but I'd rather have this than not having the right bolt in the pack. The manufacturer made sure the stand is compatible with everything. I can say it with confidence that this monitor stand is sturdy and can hold the weight. For people complaining it not being sturdy enough...I think they need to check their installation or ask someone to do it for them because mine is rock solid and I only used things that were provided in the box. What I really like is that the base has two different glass on it. One side is shiny the other one is brushed and you can decide which side to use (as in make visible) so I opted for the brushed, frosty look. The height adjustment was easy and the monitor can be tilted as well. What I love the most is the sideways swivel function, makes it super easy to show something on the monitor to someone else standing/sitting next to you. Especially useful on a curved monitor. The motion is very refined and again the whole thing is rock solid. Same goes for the rotation. These motions have got a nice consistent, smoothed and weighted feel to them while being super easy to carry out. I can only recommend this if your monitor stand doesn't allow for a lot of movement.

The photo is lying, zoom in and you will see that it is horizontal :P as is the shelf (I checked that as well), must be the camera angle. Everything else is in a state of disarray as well. That is a 32" AOL monitor on it, weighing in at 7kg according to the spec, so certainly sturdy enough, even though i have it on the highest setting, along with a Vesa adapter bracket for the AOL. It is very easy to put together but might be easier to do with two of you. I laid my monitor face down on my large mat to protect it then fitted their Vesa mount to the monitor and then fitted the stand to that, but those of you with regular monitors that already have Vesa mounting built in may find that you will need to fit it on a box if you are doing it my way. The only potential downside to the entire setup is that the vesa mount pivots completely on a single point which has no adjustment (that I could see anyway). It is done that way so you can swivel it from landscape to portrait view. I just hope that doesn't become a point of failure with time, but for now it looks and acts fine. if anything it seems more sturdy that the original stand! For the price point and ease of fitment it is worth the price, with lots of adjustment and fairly easy fixing of all the adjusting bolts once you have it in the position that you want. In fact I would be interested if they made a free standing floor version of this, as the actual Vesa mounting and pivoting seems excellent so far.

Very easy to assemble with a vesa compatible monitor, and the comes with a height adjustment function. Although this adjustment mechanism is very basic (screw in and out) It works very well, and also has a cable management option along the spine. The only negative for me, is that the piano black base scratches very easily, but on the other hand it is very sturdy.

Ordered the white version and received it the same day. I was sceptical at first, but overall this is a great stand and a lot more stylish than the one that came with my MSI 32" monitor. Very sturdy and tilts and swings as described.

Perfect replacement for the huge stand that came with my new monitor. Comes with a variety of bolts, spacers and washers so you shouldn't need to buy any extras, and even includes a combi-alan key/driver. Easy to assemble and very sturdy. Height adjustment is made by slotting the VESA mount into one of the sets of slots, so it's not as flexible as other stands but on the plus side there's no slippage, even with a heavy 32" monitor. If you do need to change the height, there's a tool-less screw to loosen at the rear and then you just lift the monitor out and slot into the new position. The included cable management is handy, but the clips aren't big enough to hold multiple high-speed HDMI and DP cables, audio cables etc. Luckily there are two clips, so I just divided them between the higher and lower clips and as you can see, they are kept out of sight. Very reasonably priced, and I'd recommend it to anyone looking for a stable and compact stand replacement.

Very sturdy,easy to assemble. Very versatile with tilt and swivel. Love it.

I got an Alienware AW3423DW monitor yesterday and ordered this alongside to replace the original stand. First of all i looked all over at stands and table mounts etc and it wasn't until i seen someone had updated their review to say this stand suited my monitor that i decided to go for it! Everything about this looks much better i was concerned about the glass base i wanted something matte but given it's black and under a screen it's not reflective or an issue and looks great. The base is really easy to assemble just attach the back stand into the bottom with two screws and washers then attach the vesa mount to the back of your display and simply slot it into wichever height you want, after this you need to hand tighten a screw through the back of the base wich secures it's position and on the vesa mount hand tighten one more thing when you adjust the amount of tilt you want on the montor and it's done! Sure you can't slide it up or down or tilt without loosening it again but you can rotate and flip it on it's side easily. So far it seems sturdy and has held in the position i put it in so i'm content. It looks so much better than the white bulky base that comes with this monitor as i have an all black set up. For the price and given the fact it comes with the tools required and all the types of screws you may need i'd highly recommend it. It has freed up desk space for me and i have sat my stream deck on the base wich looks great.

One thing I didn't realise as I was buying it is to adjust the height you need to unscrew the pin at the back, which is annoying to do once your screen is mounted. So it's adjustable when you first assemble it, but then would be a pain to adjust thereafter - fine for TVs but not ideal for my use (PC monitor). Similarly, to adjust the forward tilt, you need to press on a little pin behind the screen, you can't just move it around (as you may do with an imac screen or a screen mounted on an arm for example). Again, fine for TVs, bit annoying for PCs. When it comes to rotation, you can do that freely, however: 1) this is limited by the height at which you have set the stand, as of course you need enough space for the bottom of the screen. If you've set the stand to be short, you can't use a large screen in portrait mode without significant height adjustments to the stand 2) it almost moves a little 'too' freely, so it makes the screen feel wobbly/unstable if you touch it in a sideways direction The quality feels pretty good, it's got a glossy shine to the base which is nice, the rest is just black metal which isn't the prettiest but will just be at the back of the monitor so you won't see it. It comes with some cable clips for the back which are handy. Overall I think this is fine for now, but in future I may upgrade to one that is tailor made for PC monitors. I don't have the desk space for an arm one so I guess the search continues for the perfect tilt & height adjustable stand that doesn't cost £200 (like the Apple one). This may not be quite the one in the long-term, but it does the job for now and certainly worth the very decent price :)

Superb product. Sturdy and strong. Beautifully done clear assembly instructions. It makes sense to always get the large one since that gives more flexibility withe the same foot print. Highly recommended.

Ce support me semble qualitatif et est très facile à monter.

uzun süredir kullanıyoruz gayet sağlam ve şimdiye kadar bir sorun yaşamadık. kurulumu kolay. sağa sola döndürme kısmı biraz dandik. Fiyatına göre gayet güzel.

Es muy fácil montaje y así está más segura la pantalla extra que tengo para el ordenador. Lo de girarlo parece algo duro pero bueno, por ahora no lo necesito girar. Y la llave "L" que viene es genial porque trae por un lado lo normal en esas llaves y por otro el cabezal de estrella, lo que la hace bastante útil para otras cosas también

Ich habe den Hemudu Monitor Stand Table Stand für meinen 32-Zoll-Monitor gekauft und bin absolut begeistert. Der Aufbau war kinderleicht – innerhalb von wenigen Minuten stand alles stabil und fest. Besonders positiv ist mir die hochwertige Verarbeitung aufgefallen. Der Ständer bietet genau die richtige Höhe für ergonomisches Arbeiten, sodass Nacken und Rücken deutlich entlastet werden. Durch die erhöhte Position bleibt darunter außerdem genug Platz, um Tastatur oder Zubehör ordentlich zu verstauen – ein echter Pluspunkt für Ordnung auf dem Schreibtisch. Auch in puncto Stabilität gibt es nichts zu meckern: Der Monitor steht absolut sicher, nichts wackelt oder rutscht. Optisch fügt sich der Hemudu-Stand zudem sehr schön in jedes Setup ein – schlicht, modern und hochwertig. Fazit: Top-Qualität zum fairen Preis! Ich kann diesen Monitorständer uneingeschränkt weiterempfehlen – perfekt für alle, die ihren Arbeitsplatz aufwerten möchten.