Wireless-AC8265 Dual Mode AC8265 Wireless NIC Module for Jetson Nano Developer Kit M.2 NGFF Support 2.4GHz / 5GHz 300Mbps / 867Mbps Dual Band WiFi and Bluetooth 4.2

When I got my Nano, I was originally using a USB WiFi adapter that had issues with connection stability. I did find a way to load a more stable driver, but every time I switched to a different OS image, I had to repeat the driver update procedure. I finally decided to order a case after running the board on top of the cardboard box it came in. I decided to spring for the M.2 wireless card at the same time. The installation of the card is very straightforward, just a matter of removing the Nano daughter board, inserting the M.2 wireless card into the socket and tightening the screw that holds the board and replacing the Nano board. As an added plus, my wireless NIC came with the antenna cables already attached. I had read a few reviews where others struggled to attach the cables to the NIC, but they were pre-attached, so that save me the hassle. After installing the board and assembling the case, the new M.2 wireless NIC worked with a fresh copy of the OS image with no driver fiddling. The connection seems much more stable that it was with my USB wireless fob.

The card was easy to install and works great once the antennas are connected. Take your time when connecting the IPEX/U.FL connectors for the antennas. I was hasty and bent the housing on the antenna side of the connector and had to spend time straightening and reshaping the connector housing. I would suggest using tweezers to place the housing over the wi-fi card part of the connector and then gently pressing until it snaps into place. Double check your alignment before pressing too hard, its very easy to mis-align and then bend the housing. I recommend getting an enclosure that the antennas can be mounted to once installed. If you don't they are more or less just sitting horizontal on your bench and will not get the best reception.

Arrived quickly and as advertised. Easy to install on my Jetson Nano and wireless works flawlessly. I did have to carefully squeeze the snap pins with pliers to get the antenna cables attached to the card but it wasn't difficult. I can't to get Bluetooth to work but I can't be sure where the problem originates so I'm not confident it's the fault of this card. And I got this thing for the WiFi, Bluetooth would be a bonus if I decide to mess with it again and get it working.

I would give this product less than 1 star if possible. The mounting hole in the pcv is the incorrect size. This does not allow for the OEM shoulder screw to fit on to the pcv correctly. I have received 2 of this item and they are both manufactured incorrectly.

Simple to use and was instantly recognized by the system. I swap it around it use it In multiple projects. Jets nano, dell optiplex, etc.

Comes well packaged with everything you need to pair this with the Jetson nano. Came with the nuts to attach the antennas on the case. Solid wifi connection

Used this for adding WiFi & Bluetooth connectivity to NVDIA Jetson Nano. It worked perfectly out of box as expected without any additional tweaks.

Used for a Jetson Nano. Works great so far, typical antenna connections so it's easy to upgrade if you want more distance.