Ticova Ergonomic Office Chair with Adjustable Headrest, Armrest and Lumbar Support - High Back Mesh Office Chair with Thick Seat Cushion - Reclining Computer Desk Chair

I just moved in to an empty room and have been searching for furniture for a long time, especially the chair for computer desk. I noticed that this chair has a better appearance and decided to give it a try. And I’m surprised by how good it is. The chair arrived very soon. It’s well packed and protected, without a single scratch. It’s not a light one, which means it’s really stable, but it’s also easy for me to install it alone around 20 minutes. As for the design of the chair, I love both its neck and lumbar support, which are flexible and comfortable. No matter how deep you sit, they can offer firm support. The neck support can also be adjusted up and down for people with different height. The armrest can also be adjusted. In fact, there are a lot of freedom given in installation, so that I could find the best setting for myself after a few tries. I sit in front of my computer many hours each day, so quality of the seat cushion is really important for me. This chair’s seat cushion is quite thick and soft. I still feel good after sitting for hours each day. Also, the wheels are quiet and smooth to move around. Overall, this is really a wonderful choice with very competitive price. I have done quite a lot research on the chair selling on Amazon. I think this one, my final choice, is the best cost performance ergonomic chair. After using it for several days, I really like it and I strongly recommend this chair to anyone finding an ergonomic chair below 200 bulks.

Pros: - Easy to follow assembly instructions. - Lumbar support is nice but wished it had a larger range to go deeper into my back. - Very comfortable so far (it's only been 2 days) - Good size for me (and probably most people). I am 5ft3in. I use the lowest setting to barely plant my feet on the floor or a taller setting where can plant my feet on my footrest. I'd say if you were shorter and wanted to plant your feet on the floor it would probably be too tall. My boyfriend is around 6ft1in and it is comfortable for him but if he were a few inches taller the chair would probably be too short. - The armrests height are adjustable. I use the highest setting and it is perfect for me to rest my elbows on. - The seat is large enough that I can sit with my legs crossed on the seat comfortably, which I really like. Note that if you are shorter than I am you may not be able to bend your knees if you sit completely against the back of the chair, due to the length of the seat. The back of my knees are right on the edge of the seat when I sit against the back of the chair. Cons: - The headrest is definitely the cheapest part of the chair, specifically the plastic part that adjusts the height. You have to position it to the right position in relation to your head or else it will collapse when you lean your head back. Mainly why this is minus 1 star. - It may not be a con for some, but the seat fabric is not leather/faux leather type of material. So it might stain more easily and be harder to clean.

I bought this chair back in March. It was easy to assemble and even comes with gloves. The chair is comfortable even when sitting in it all day working from home. In July one of the arm pads developed a split. I emailed the seller asking if it was covered under any warranty. They quickly replied that they would send out a replacement directly from the factory which might take 2 months to arrive. They also offered a $25 credit to purchase a universal arm rest to use while I waited. Since the original armrest was still usable I did not need one while I waited but it was a nice offer. The replacement arrive 25 days later and even came with 4 new bolts even though I could use the 2 from the original. I am quite pleased with the chair and like that the company takes care of the customer.

Bought this chair for $200 in March 2020 for WFH. I fit within the weight limit for the chair and I don't consider myself "hard" on it's use, but it was reasonably comfortable. Wasn't a fan of it's lumbar support from day 1, but I got it within a reasonable tolerance. By NO means was this chair, or intended to be, a "8 hour work day chair" but I'm often up and walking around while I'm working, so it fit my needs. I used it for about 2 months until my employer allowed me to bring my office's high-end Steelcase office chair home. Opted for that because that Steelcase is an awesome chair (and there's a reason they cost $1K and up). I used the Steelcase from May 2020 until July 2021, then brought that chair back to my office and swapped back to my "new" Ticova for WFH. My Ticova was in the corner of my home office, generally holding my hoodie or a pair of sandals at most that entire time. About a week ago (late Aug. 2021) the recline mechanism broke and it will not lock anymore. Engage the lock, it holds for a moment or two then it releases so I can't sit up straight anymore. This chair is now nearly unusable as a work chair. Contacted Ticova support. Technically the chair is out of warranty, but with how little use it's gotten since I bought it, I suspect it was flawed from the factory and had I been using it full time for WFH I would have discovered this flaw within the warranty period. Ticova's support response, while prompt, essentially said the "frame would need replacing" and I could buy one. That's it. This is telling me this chair was a piece of $200 junk from the very beginning and Ticova's "support" is indifferent at best. I've gotten better performance out of a $50 junk chair I bought at Walmart, lasted me 4 years until I replaced it with this Ticova. If you're doing the new 50/50 office/WFH (or permanent WFH!) with your job , pay up for a GOOD chair from a reputable company that stands fully behind their product. Avoid anything Ticova. Overpriced for low quality and really tone-deaf support.

Coming from a normal sized male of 6'5" at 240lbs. The good: -comfortable to sit in for >4 hours at a time -adjustable arm heights sit well for my frame size -build quality appears robust -Customer service is beyond exceptional: they made my complaint right and threw in an benefit The bad: -lumbar support is jarring if not at perfect posture, which is annoying but not a deal breaker (big people problems) -not the most comfortable seat cushion and feels nearly too shallow (big people problems) -the headrest is flexible and bends to align head slight tilted up TL;DR: Definite upgrade to OfficeMax. Customer service goes out of their way to make things right. Would endorse product for large framed humans.

Pros: - Decent Back and Seat (for a year and a half) - Responsive warranty team Cons: - Squeaky (WD40 and similar products don't seem to fix this) - Arm rest quality is poor. The padding on both arm rests started to show cracks and breaks after just a few months. The left armrest's spring-based button system broke entirely and needed to be replaced after ~6 months of daily use. It took about 2 months for a replacement to arrive since the chair was built in China, although the delays could have also been due to the world's situation. A decent chair for a time period, but has poor quality parts. At this point the headrest has snapped off from normal use, something busted in the seat and now it doesn't adjust properly. EDIT: Over 2 years in, this chair has basically broken down and is causing a lot of back pain. I'm not purchasing from this brand again.

Having had repeated neck RFL [radio frequency ligation] procedures over the past decade, I was searching for a chair with a neck support that befit my condition. I took a chance on another reviewer who mentioned neck problems who seemed quite enthusiastic. As it turns out the chair's neck support in its lowest configuration is just about right for me. I'm 5'8" , and a metamorph. I use a solid cushion roll for my lumbar region. The chair is well built. It provides a solid feel. Adjustments are intuitive and work flawlessly. It is comfortable and quite an improvement from my previous office chair. Assemble was fairly straight forward. I recommend this chair.

Quality of the chair seems high vs the price. Assembly was pretty straightforward, extra fasteners were included in case you lose something, they even included cloth gloves. Particularly impressed by the thickness of the plastic mouldings and the cast aluminum base. I added easy roll casters off amazon for about $30 (SEE PICS). The only reason I’m not rating 5 stars is the lumbar support... they attached the adjustable lumbar pad to the structure of the chair at the top of the lumbar pad, which means the lower portion of the lumbar pad can easily flex back, and so your back really only feels the top pressure of the pad. The chair is good enough that the way I am working around this is by adjusting the pad to the best position for me and then supporting the bottom portion of the pad by pushing a spacer down in there, when you see the assembly this will make more sense, and it’s an easy fix to improve comfort. Overall for the money I’m pretty happy so far but redesigning the lumbar feature would make it a great chair. Also - small detail - they should print the Recline logo on the handle right side up, this is really the only visible ‘tell’ that this is not a high end chair.