- RB-128 High Precision Steel Router Collet Reducer 1/2 Overall D x 1/4 Inner D x 1-3/16 Inch Long

Works perfectly for my needs. I was gifted a monster 1/2” router but the majority of bits found at local stores are all 1/4”. I’m not trying to pretend to be a professional woodworker, my name is not Bob Villa or Norm Abrams. I don’t need commercial grade 1/2” bits to do minor home projects. This makes using more easily available bits possible, which is perfect for me.

Just a small steel tube with a split on one side but it is very accurately manufactured to fit between a 1/4 inch collet chuck and a 3/16 inch shaft mill or drill while maintaining near perfect concentricity. Opens up a whole additional range of tooling for my routers and die grinders.

most all of my routers have 1/2" collets and it's been so long since i've used the 1/4" collets i have no idea where they even are so rather than ordering new collets for different bran routers, i picked up this adapter. i mounted it and checked the runout and it was less than 0.0001" ( 1 hundred-thousandths), it fits the 1/2" collet perfectly and holds the bit securely with no slip.

Well made. Fast shipping arrived earlier than promised. Clean tool, no remaining burrs. Perfect fit to my original 1/4" collet and every 3/16" cutter I've used in it so far.

Muy bien en todos los sentidos y es para confiar en el servicio que prestaron. GRACIAS

This worked well to replace my beat-up Makita collet that became difficult to remove bits from. The Amana has a different design that I hope holds up better but is otherwise the exact same size. It has 4 segments, but none run the full length of the collet and all 4 cuts are through the entire thickness of the collet versus the Makita that had one full cut through the entire collet while the other 3 were only scored the entire length.

I like the way this works. Push it on the shaft and it does not slip off. Easy to pull off.

this is a great product made in Isrial.

Solo me confundió un poco la imagen ya qué no coincide con el producto a comprar, me base en la descripción del producto rogando a que NO me llegara mal, pero me llego correctamente.

This is my second one in 40 years of owning this router. Use mostly 1/2" bits , but this always good to have when I have to use 1/4" bits.

I had an issue with another Amana 1/4 to 3/16 reducer that barely clamped onto an end mill. This 1/4 to 3mm is even worse. It can not even clamp onto the 3mm endmill no matter how tight you lock down the collet nut. The Amana 1/4 to 3mm reducer has a single slot cut on the side but because of the thick wall thickness it can never clamp down onto a 3mm end mill no matter how tight it got the nut. Don't buy this reducer because you will waste your time trying to use it.

I had a wood working project to complete. This item allowed me to finish the project. I would highly recommend this item.

It works, what else can be said?