Digital Caliper, Sangabery 0-6 inches Caliper with Large LCD Screen, Auto - Off Feature, Inch and Millimeter Conversion Measuring Tool, Perfect for Household/DIY Measurment, etc

I needed a simple tool for some DIY measurements and this digital caliper is an incredible deal. What really sold me is that the tips are plastic, which is exactly what I was looking for to measure electrical components safely without the risk of shorting anything out. It’s also very convenient to use the digital display turns on automatically as soon as you slide it open, and the slide itself stays firmly in place once you set your measurement. It’s surprisingly accurate and the large LCD screen is very easy to read. I was also impressed that it came ready to go with extra batteries and a small screwdriver. Switching between inches and millimeters is seamless and the build quality is solid for household use. If you need a safe, smart, and budget friendly tool for electronics this is a must have. It feels a bit lightweight and plasticky, but for a budget tool, it’s honestly more than good enough for home use and DIY projects.

Great product for the price. Already used for multiple projects to accurately determine small sized components. Perfect for 3D printing parts. Super easy to change to metric and back.

I’d give this Sangabery digital caliper 4 stars. For basic household and DIY measuring, it does what it’s supposed to do: the large LCD is easy to read, switching between inches and millimeters is simple, and it’s accurate enough for non-professional work. It’s handy for checking inside and outside dimensions and depth without dragging out more expensive tools. My only real complaint is the build quality—the plastic body and overall feel are clearly “budget,” and it doesn’t have the solid heft of a higher-end metal caliper. That said, for the price, it’s a perfectly serviceable measuring tool if you just need something affordable for casual and DIY use.

Perfect for the home owner. Light enough to feel but not light enough to be damaged by just looking at it. I think it will last if it is taken care of. Also come with batteries and a screwdriver to open the battery compartment.

Good value. I bought 2. They are consistent with each other and tested accurate at various ranges. Each one came with one battery already installed, and a pack of 2 spares. Comments: Strangely, the battery department requires a Phillips head screw driver. It is included. Be very careful not to lose these extremely tiny screws. Hint: Before using - always push the slide closed, take your finger off the slide, and then press the ZERO button to calibrate the readout. Hint: These are made from carbon fiber infused plastic. They are very sturdy, but they can flex. When measuring, do not use too much force or you can alter the reading. Hint: When the calibers are totally closed at 0.00, note the gap at the top of the measuring faces. They touch on the lower 3/4ths of the faces. When measuring, be sure to use the lower part. If you measure in the upper gap, you'll be off by about .04". ********** Accuracy testing: There is nothing more in this review except for technical details of the accuracy tests. Don't bother reading unless you are into this sort of thing. The accuracy tests had excellent results. The precision is supposed to be .01". I found they were about 10 times that accurate at about .001. That's as far as I can test with a readout that only goes to 2 decimal places. I used a set of Grade A2 precision gauge blocks to test. They are factory certified to be within 0.0002". For the .01 resolution of these calibers, these gauge blocks are WAY overkill. But I have them sitting here, so ... See the attached photos for measurement examples. Most of the measurements photographed were taken with the blocks left in the case, so the measurement shown in the case below them match the block used On a couple, I had to reposition. On these you can see the empty slot to the right under the caliber and read the measurement there. Sorry for the focus, I was hand-holding the phone. To make the numbers show, I was also hand-holding a flashlight. Most turned out OK, but at least one turned out pretty fuzzy. All measurements were done holding them properly with any multiple block wrung together. Only the photographed ones were done a bit sloppy. Luckily, at a resolution of .01, they could be sloppy and still be accurate. Very different from my normal measuring. To test for accuracy, test what a known item measures. Then, also test to see at what point a number rounds up. Then do these tests a various places along the slide. I tested 4", 2": 1" and .05". Then I tested to see where it rounds down/up. .105 measured as .10" .106 measured as .11" So, the rounding happened at precisely halfway between .10 and ,11. Perfect. Way better than the specs. Within .001 for a stated resolution of .01. Very good. In another set of tests (not photographed), I took the 4,2, and1" blocks and tested each with the addition of the .105, .106 blocks. They all rounded at the same place.

Seems to work fine but as soon as this thing moves it turns on. So forget about keeping it in a bag or similar. I guess that's why it comes with 4 extra batteries.

Cheap accurate light weight tool. Will it hold up to regular daily use???? No. But you aren't paying $130 for this. How's it compare to my works $130 calibrated one that's metal and reads to .000". Pretty close! I measured .805" on the $130 metal one at work and this displayed .80. So for occasional use around the garage this will give you a very close idea to .00". Being so light weight if used regularly I'd recheck it regularly against something you know the exact size of. I don't need exact....out of the box it reads extremely exact. For $7 my initial option is it's well worth the $7. BTW I have good eye site but still appreciate the big display. Works $130 has a smaller display that's still readable but not as easy to see from a distance as this. This is not professional grade by any means but nice for the cost.

Bought this caliper primarily to measure watches, straps and watch bracelets. All of my other machining calipers are stainless and not suited for watches which, like jewelry, can be damaged with steel measuring tools. These calipers are made from sturdy nylon and they are very accurate. I checked them against my machining calipers and they are dead-on. They are adjustable, easy to use and they are easily switched between mm/in. They also turn on automatically by moving the caliper jaws which is a nice design. They also turn off automatically if left alone for several minutes to conserve the battery. All in all, a lot of bang for the buck.

Very accurate, very lightweight, great for what I need it for - mostly household and random works with my cars and bikes.

Good product with reasonable price but not that much accurate as I need to measure in MM for small particals Even didn't got 2 extra batteries with product as mentioned

The caliper does its job. Althought this may not be the best caliper on the market, it is more than sufficient for the typical hobbyist/3D modeler. The only problem that I have had whilst using this caliper would be that the mechanism tends to become slightly stiff if not stored in a dust-free environment.

same product as i was expecting .

This is a decent caliper for the price, however if you want absolute accuracy .x you should definitely spend a bit more for a more accurate one.