Anti Vibration Pads for Washing Machine with Tank Tread Grip - 4 Pack + Level - Fits Most Round Feet up to 1.75” - Stops Washer Dryer from Moving - Rubber Antivibration Stabilizer for Leveling Washer

This product works exactly as advertised. I installed pedestals on my washer and dryer and no matter how much I tried, I just could not get them leveled so that they would stop making noise during the spin cycle on the washer or drying on the dryer until I came across these. Once I got them placed, noise levels were like night and day. These things are great and have a lifetime guarantee.

This reduced 80% of the vibration we feel when the washer is on the spinning phase of the cycle. You can feel the vibration in the floor. Given that the floor underneath my manufactured home is hollow, these pads are fantastic. You can’t beat the quality and price. Do yourself a favor and buy these for your mobile home or manufactured home

I have a washing machine and it rocks and shakes and moves across the floor. But it is 20 years old and works really well so I do not want to get rid of it.With these pads: The vibration on the floor is cut down by half, it does rock pretty hard back and forth still, but it stopped moving around the floor.I think for me it is worth the money as it allows me to continue to use the machine.

Our washing machine is in our basement which has uneven floors. Raising the washing machine up about an inch with this product made it possible to properly level our washing machine making it significantly more quiet and has prevented it from moving as well. Yes, our washing machine used to move so much that one time it knocked over our bottle of bleach and laundry detergent on the floor making a huge mess. This product is durable and prevents all of the unnecessary shaking that can happen when your washing machine is in motion. If your washing components have ever fell off your washing machine or your washing machine moves when in use this product works perfectly to prevent that from happening and is designed for you! My only question is why don’t washing machines and driers come standard with a product like this since it helps so much! Thank you for reading this and I hope it is helpful!

These work great, easy to install and help so much if you have yall ceilings and concrete floors

Bought these to do two things: to stabilize my washer (cut down movement, vibration and noise) and to protect my newly installed laundry room floors. I will say they have cut down some on movement (my older top-loading washer does not travel as far with these feet). My washer used to push my dryer into the wall it traveled so much, but it did that rather quietly. That is NOT the case now. I swear the noise level seems to be much HIGHER than before (it’s like all the vibration and movement just echoes in place). We cannot watch tv two rooms away without turning up the volume at least 5-8 notches when the washer is going, so I just don’t wash clothes if we are trying to relax with tv. The one goal that seems to be working - though I’m not sure how - is that it does not seem to be tearing holes in the floor. I’m keeping an eye on that and will remove the feet if necessary, but the feet were a real pain to put on (especially on the back legs) because they don’t slide into place (not supposed to). Hence you need 2 people to install - one strong enough to hold washer up and one with long enough arms to reach back to place feet in just the right spots so the washer can be lowered down perfectly on the feet. It’s a trial and error (more than one try unless you get really lucky) process. Would I buy them again? No, but do I want to crawl back undr the washer to remove them? No. They work fine under the dryer, but it did not travel nor was it noisy to begin with. I just wanted both appliances the same height and the floors protected, so we put the feet under both.

They are very stable and able to take large weight. So far working great for my large LG Washer and dryer that are stacked. I am not sure about the longevity. I am very happy for now. Will update if they fail.

So, I had been chasing this really bad vibration issue with a new washer that we purchased. It's a bit unique as the washer is upstairs and sits in a rubber pan on a wood/vinyl floor (vs concrete). I had done some research on balancing/leveling the washer and had gotten it as good as I could with the base system, but it was still noisy and vibrating the whole house for certain loads.Note: If you are having a problem in this area, one important tip that I came across that didn't dawn on me was to shake the washer from corner-to-corner. Even if it is level, if it still moves pretty freely, you're going to get vibration noise and movement. I had to lift and level a few times as the rubber pan mine sits in has ribs that the pedestal sits on, so had to lift it high enough so that it didn't sit on those. And the pedestal height is probably a contributing factor, but we are not getting rid of the pedestal! ;)Although the supports did not completely alleviate the vibration and noise, they did significantly decrease the vibration and noise. Enough that I thought there were well worth the purchase price and enough that I would say they removed almost 90 to 95% of the problem. The increased footprint was clearly a big help and they lifted a bit higher than the feet adjustments that I had previously made so they were clearing the ribs on the rubber pan.Before installing these, I reset the pedestal feet back to 0 height. For me, well worth the purchase.The pictures are of the feet installed. The video (you can only upload one!) is after they were installed and I'm washing clothes and a large Judo Gi (many times the culprit).Installation Notes: Due to the location of my washer I used a yoga ball and air compressor to lift the washer and place the feet. Good thing I have long arms. I have included a couple of photos of those as well.

love them ! so solid they might just outlive me !

A little pricy .. But it is the only one that realy works .. All ather are plastic .. This one is Rubber and does not move.

These pads are true saviour. My washing machine had kept vibrating and moving to the front after each wash even though it was levelled. After installing these pads, no vibration and of course no harsh sound and no moving!A bit pricy but do the job perfectly.

Great product which hs helped my stacked washing machine and dryer from moving around and reduced noise ..the product is well made and sturdy and at a great price point

My washing machine went wild on these, hockey pucks worked better. Too be fair I still replaced the washer because of excessive vibration but the replacement machine works very well on pucks. I think it very much depends on the rigidity of your floor what will work best. Returned these for a refund.