NFC Supported RFID DIY Hidden Cabinet Locker & Drawer Lock - Punch-Free Electronic Sensor Lock

Decided to install lock in my custom built media console when my 1.5 yo figured out how to open it and started to peek inside. Works perfectly without having to drill any key holes and such. Regarding installation, it was a tricky one. The included manual does not have installation instructions and it took me some time to figure out how to align both pieces to match. The trick here is to use double sided tape while you’re aligning them, so you do not need to drill holes to hold them in place. First, push the smaller piece into bigger one, then tape bigger one inside so that smaller one is almost flush with the surface where the door will be. Then add double sided tape to the smaller one, peel it, close the door (thus pushing the door against the tape), then unlock the lock with NFC key and open the door. The smaller piece will stick to the door thus marking where it should be. You might need to adjust the bigger piece forward and back (unpeeling tape and sticking it again) to ensure that the lock engages properly and does not leave a hole between the cabinet and the door.

Have not tried them yet have a project that they are going to be used in when I try them out I will let you know

I got this to lock a cabinet door to keep some stuff locked away. Overall it's great! The cards all worked right out of the box, but I reset and reprogrammed them anyway using the included instructions. I had to fabricate an additional latch so the one lock would secure both sides of the cabinet, but it was pretty easy to do. I was struggling with installation as I wanted the small locking pin on the door but then I couldn't get the card to read. I ended up moving a few things around a bit and got it working. Instead of putting the card on the face of the door, I put the card on the shelf directly above the cabinet. The reader easily worked through the 1/2 inch shelf. Now everyone thinks I'm some kind of secret agent because I use a key card to open my cabinet!

This thing has so many possibilities. I used it to put a hidden lock on a cabinet. The signal passes thru 5/8 particle wood no problem. Its a little thick but nothing rediculous. Appears to secure the door quite well. The only difficult part about it is lining up the door latch part with the lock mech hole. Well worth the cost. Comes with several cards and key fobs. Update: been using this for about a month now and love it. Works great. It's invisible so no one even knows there is a locking device in its location. Nothing to pry and no one knows where to attempt to break in to. Batteries hold up well too.

These things are great. I installed one on customers cabinet and had to get one for me. I love that you don't have a hole on a cabinet door. Great product !

Unfortunately mine wouldn’t unlock after a few months. It’s was on a cabinet that i rarely use and one day it just wouldn’t open. This was disappointing because I used glue when building the cabinet so getting inside was tough, but at least it was wood. I made several duplicate fobs and none worked. Until it stopped working it was awesome. I’m not going to risk it again. In fact i don’t think I’ll ever buy a powered lock again. Combination locks always work.

Was fairly easy to set up and worked just fine until I went to install it about a week or so later and it just quit working. Changed out the batteries and that didn’t help either. I’m glad I caught it before I actually installed it or I would’ve had to trash my cabinet to get it open.

Install was difficult but luckily I just had my gf crawl inside the chest and line it up from the inside! Lol very easy to set up...I have this to keep valuable locked up in a camping van. Pair this with some struts and you have hands free opening!

منتج فوق الممتاز بصراحة ❤️

RFID tag not received with product only smart cards received. Can’t carry smart card. Need RFID tag. Please get it delivered if your showing it with your product.

Difficult to install, no introductions. Sensor works pretty well on 3/4” thick door if fob is on exact location. Hopefully there will be some sort of low battery notification.

The red so called rfid tags don’t work . Smart card works. Main problem is the lock is not holding correctly , can be easily open without key.

القفل كويس جداا حصل غلطه ووصل لي من غير الشفرات واتواصلت معاهم وحلولي المشكله جوده المنتج نفسه كويسه بيشتغل ب 4 حجاره ريموت استجابه القفل للفتح والقفل سريعه سهل التركيب والبرمجه