Max Water 6 Stage Aquarium System/RO Water Filtration System with Deionization Filter RO Water Purifier 100 GPD Hydroponics RODI System (Clear)

Works amazingly as it should. I upgraded it with a tds meter, changed the hose route to put in a flush valve, and replaced the pressure gauge as other reviews said the one that comes with it are junk. Otherwise it works as it should.

I bought this system for my saltwater aquarium and it works amazingly good, I love it how fast it fills up my buckets, it take time from me that before used to spend longer doing with my old system

It works. 3 stars because the instructions are terrible. The video installation is the only saving grace. Even still, the video and the instructions show nothing about the pressure gauge and where it goes as well as the teflon tape placements. Your main filter cap will require the tape or it will leak no matter what. Be sure to look up a guide on how to properly use the tape on the filter cap or you will spend hours cleaning up wet floor and disassembling/reassembling the unit.

Great filter but instructions are vague and the instructions show how to connect filter to 2 other devices i dont have , water pump and pressure switch which did not come with this 6 stage water filter. Better instructions are needed to install. I was able to get it done but I took off auto shut off valve and pressure gauge

Very pleased with this product. Easy set-up with clear, concise directions. All filters and tubing are included and are of standard size so they will be easy to replace when necessary. You will need an adapter to hook up to a kitchen/bathroom sink. Everything else comes in the box. price is fair, too, for my dime.

I only have maybe 150 gallons through it so far but to get 100 gpd you will need the booster pump. It puts out 5 gallons per hour. So far it is a God send to me. All water has been 0 tds. I did take out the sediment filter and put in a carbon block 5 micro in the first charcoal in the second and carbon block 1 micron in the third . This water is for my reef tank. So it has to be the best.

Lucky I bought the one with the pressure gage because I would have thought my water pressure was to low and would have wasted another 200 on a booster pump. It takes 24 minutes for a gallon of water. That's only 60 a day. The directions are terrible and the pictures don't even have the same components as what they sell. I do not recommend this product.

Good system but fyi the filter system is the samefor 75gpd as 150gpd. Both have standard 2x12 housing so a 50gpd up to 200gpd membrane will work in the 75gpd.

Using since 8 months it works perfectly

Je suis très content épreuve excellent lors de son usage je recommande.

When I got this setup the filters were already installed in the housings. I mounted the 3 filters to the wall and set up the plumbing as one does. Before I turned the system on I wanted to take the housings off to ensure all seals were in place. We'll, I broke the supplied filter wrench trying to take the housings off. I tried all 3 with firm pressure and couldn't get the housings to turn....so I put some weight behind the wrench and gave it a good pull and the wrench snapped. I confronted the company when this happened and they did not offer to replace the wrench. They did tell me I could use a rubber strap wrench and that was all I got out of them on the issue. I didn't make a fuss as the filters were already to go anyway so I just ran the system, it didn't leak. Today, I went to change my filters, I bought another filter housing wrench at $14 and attempted to loosen the housings. The crap wrench promptly broke. So I had to purchase strap wrenches...which also broke....and the one wrench is quite large with a real thick rubber strap...broken. the filter housings have not budged and I'm out $35 in bulls*** wrenches. Not impressed. I will not be buying from this company again. Also just to be clear, the filters themselves work great, but my housings will not come loose.

I bought this as a part of my water treatment setup for my Undercurrent RDWC hydro setup. I'm on municipal water in a newer house, but the tap water is still 140 ppm. This unit takes in down to 0 -1 ppm. I wish I would have paid the extra $30 for the 150 GPD setup. I was unsure what the municipal water lines pressure coming into the house was, and i didnt want to purchase a booster pump so I went with the 100 GPD. I like how they include a gauge that you can connect to read what your at. I'm sitting at 60-65 PSI. My only issue was that this unit didn't come with a supply adapter that I could use. I use a garden hose "Y" splitter off my washing machines cold water line for my supply. Because of that, I had to purchase a pack of Female 3/4" GHT x 1/4" Male fittings and rig it up myself. Maxwater has more fittings on their website, but I didn't see them as an added option to purchase at checkout. I decided to buy through AMazon for shipping and warranty coverage, as well as prime shipping. All in all a great unit that I would definitely recommend.

Bought this for RODI for my reef tank to replace my RO Buddie. Wish I had bought this first. Running 60 psi and putting out about 75 gallons a day without a booster pump. Water quality is excellent. Comes with a pressure shut off valve so if you pair it with a float valve on your collection container it won't overflow (had that happen a few times). Only issue, directions where a little confusing for setup - but it comes pretty much ready to go.