Apollo Laser Jet Printer and Copier Transparency Film, 50 Sheets (CG7060)

Works great, used on our laser jet printer and it comes out great. You do need to let it sit for about a minute so that the ink dries. It is some what thick so it is strong, creases if you bend to sharply. Haven't tried printing a picture on them yet as I don't need to. I use these as a tracer.

If I have learned anything about screen printing, it is that trying to skimp or save costs more in the end. I have tried several other brands of transparencies for printing images with an inkjet I purchased solely for printing transparencies to screen and they...well, they sucked, but they all cost money. At the recommendation from other reviewers I tried these and what a difference. These transparencies are actually transparent. They are not foggy and don't skew exposure time for screens. I used these in a B&W Brother laser printer in the manual feed tray and sent them through on the "plain paper" setting, one at a time and they have printed flawlessly. They don't catch and cock themselves to make the image out of square with the edges of the transparencies. They feed into my Brother printer without flaw. If you are screen printing, you do NOT need a pricey inkjet. I am doing all of my stuff with a $100 Brother laser printer and these sheets. TIP: If your font does not print completely opaque because of the particular font itself, print two copies, double them up and expose the screen with the two printed copies stacked on top of each other and you will get a crisp exposure.

Works good once you can get it to go through the printer. I wasted about 10 sheets as it would feed half way and then jam as soon as it started to print. I have a high end HP and have never had this problem before with any other paper. I tried many different paper settings but nothing helped. Tried putting only one page in the feeder tray to 5 at the same time. Even took each sheet and waved it through the air before putting in the paper tray with other pages to try and get rid of the static between the sheets. NOPE! That didn’t help either. I use these for printing transparency for embedding in resin jewelry and key chains.

These transparencies were great for printing Moiré Patterns on. Like every transparency I have ever worked with (my first job was at a print shop), the toner had trouble binding to the transparency of I got finger oil on it, and with enough effort, the print will scratch off the transparency. These are shortcomings of any transparency. These are thick, durable transparencies that should last some time and serve most people well. I was highly satisfied with them, and would recommend them to anyone in need of transparencies.

Product works well. No instruction on how to use it. Looked it up on google. The imaged came out well and when I run it under water, it did not run. Used it for resin projects. The price was great. Would have given it 5 stars if the picture was a little more crisper.

I have had great luck with these transparencies in my HP Lasterjet printer. The pages are consistent in quality and always feed properly in my printer. I have used more than five packs of these transparencies and never had a jam or misfeed. I use the transparencies to make negatives for a photographic process called Cyanotypes. This is a great product and I highly recommend.

Exactly as described.

For common usage this product will probably be fine. However, for anyone who is looking for transparency film to use in the photo developed PCB manufacturing process, this product is not what you want! It is a very thin material, and the coating does not produce a quality image from my HP P1102W LaserJet printer. Printed PCB artwork comes out very distorted and may have random black flecks from the failure of the material to hold the toner, potentially connecting planes and traces, causing shorts and rendering it unusable. I wasted about 25 sheets before I gave up, sent it back and ordered a different brand. If your into making PC Boards I recommend a higher quality product such as the 3M brand CG3700 ( which admittedly is getting harder to find) or perhaps one of the other premium transparencies such as an HP brand product. I have used the 3M for years and it works flawlessly in the same printer listed above. The extra expense will save you headaches and money in the long run!

Excellent product

all 50 sheets were there but I'm not sure I would call it 'new' as the package had clearly been opened

I got today and try already , it s serve the purpose, I use for reusable stencil and easy to print and cut

every thing was perfect good produc

Fonctionne super bien avec l'imprimante!