Over Drive PolyPRO3 Folding Camping Trailer Cover, Fits 8'-10'L

My wife and I installed this cover today for the first time. It protects a 2016 Adventurer 80RB. The sizing was confusing and the range of fit has something to do with the very loose fit. "Fits 8 to 10 foot campers". Since the Adventurer is an 8 foot camper, it's very loose with lots of sag in some areas. That being said, it is designed well in that the elastic around the bottom and draw straps collect and secure the excess pretty well actually. It was surprisingly light weight which made handling it easier than I thought. The downside to this however is that the slightest breeze will defeat 10 minutes of work in an instant. It was harder to put on than I thought but my wife and I managed it in about 45 minutes. It took 10 minutes just to get it unfolded out of the bag and for us to figure out what we were looking at (what was the front etc.). Remember, this was the first time we'd ever put any kind of cover on an RV. In the end, I was pleased with the fit and the security of the cover. I think it will do a good job of doing what it's intended to do. It does have vents along the sides at the top for ventilation which are covered by the white roof overhang material. The only prep I had to do was tape pieces of 2 inch memory foam over the sharp gutter drains on the 4 roof corners and fold the FM antenna down. I also undid the rear zipper along one side which allowed entry through the rear door (only unzipping one side). I added a couple "tarp clips" at the front and secured them with two bungee cords (excess material on the front underside. The front section fits the most loosely but I was able to squeeze in the tee upright support that I had made for the camper which really holds the material captive. (see photos). We followed the directions and everything went as they described. Classic Accessories OverDrive PolyPRO 3 Deluxe Camper Cover, Fits 8' - 10' Campers - Max Weather Protection with 3-Ply Poly Fabric Roof RV Cover (80-036-143101-00) UPDATE: 12/29/16 - Updated from 4 to 5 Stars .... See added video :-)

Thank you for clarifying! Here’s the updated, tidy version of your review: I purchased this truck camper cover in October 2023, and it’s now in its second winter, performing exceptionally well. It has kept my camper dry and protected from dust, debris, and the harsh New England weather. The snug fit ensures full coverage, including the over-cab area, with minimal gaps for debris or moisture. Once secured, the cover stayed in place all winter, even through strong windstorms, without any need for strap adjustments. Installation is straightforward and can be done solo with the help of a ladder, taking about 20 minutes. The breathable top fabric repels water effectively, and the side vents help prevent condensation. The cover also holds up well under the weight of snow, though removing it in winter can be challenging, as snow and ice tend to stick to the material. One of the cover’s standout features is its accessibility. The zippers on each side of the rear make it easy to access the inside of the camper without having to remove the entire cover. However, I’d suggest adding straps to the elastic on the cab-over section to better secure the front and provide additional protection. When not in use, the cover folds easily and stores compactly in a small tote, which is a nice feature. Overall, I’m very happy with this cover and would recommend it to anyone with a truck camper. I gave it 4 stars instead of 5 because of the snow/ice sticking to the material and the lack of straps to secure the cab-over section better. It’s durable, user-friendly, and a great choice for protecting your camper during New England winters.

Fit our older Aspenlite very well and has shed the PNW drizzle. Great wrap under strap placement every where but the front overhang. To help the elastic which will eventually weaken we added two tarp clamps and straps as we do get strong winds. No issue covering with room for the air conditioner. Haven't had any problems. Easy to access rear door.

**Update #3** One year after replacing defective cover. The replacement cover is now approximately 1 year old. Almost all of the strap mounts have failed. (see pics). I've had to use safety wire to reattach them so they work. They are horribly weak in their attachment and fail easily. The cover itself is ripping on the top already after 1 year. This zippers are very weak and if you have a center door configuration, you will fight getting into the door while fighting the covers layout. Other than a good fit, I can't think of a single reason to buy one of these ever again. **Update #2** The replacement cover finally arrived. After one month of service, one of the under unit (belly straps) attachment points has already fallen off. The attachment material must be really poor. Overall, stay away from this cover! **Update** This cover suffered a rear corner zipper failure at 11 months. This is puzzling as this zipper was used around a total of 5 times since purchased. These zippers are rather flimsy and are placed on the outside edges of the camper. I believe this to be a design flaw as this is also where a cover gets stressed a lot. At least the zippers SHOULD be heavier duty. I contacted the seller. The Amazon receipt was not enough for warranty coverage. I had to get the "numbers" off of the camper tag. (see picture) The tag had faded in 11 months to a unreadable degree. Fortunately, after much searching I found the stuff bag which also had the needed numbers on it. I don't know if warranty would have been extended without these numbers. Take pictures of your tags if you buy one of these covers, but you should really look elsewhere! After going through these hoops for 3 days, I was informed that the cover was warrantied. HOWEVER, they had none in stock for at least 3 MONTHS to replace it. I am supposedly going to receive a cover shortly (we'll see). In the last month (the cover is now one year and 2 months old) both corners have torn (see pictures). How much of this is due to the rear zipper failing, I don't know. My ADCO covers always lasted 2.5 years, so this cover is well under that standard. I figure the replacement cover (if I ever receive it) is maybe good for another year. Then it's back to ADCO for me. Original review: I have used ADCO covers for my camper since 2001. Their average lifespan is just over 2 years before the tops rot out and disintegrate. My camper, which was covered under the ADCO's for 99% (the other 1% is when it is in use) of the time during it's life suffered extensive water damage at the slide-out. How this water damage can occur when it is basically covered all of the time is beyond me. Now that the camper has been repaired, I just decided to try something else in covers, thus this purchase. Since I have no time yet with this cover, I can't say how long it will last. However, I can say that its basic design seems better than the ADCO's it replaces. Firstly, the roof seems waterproof, unlike the ADCO which water goes straight through. Secondly, the top is vented, allowing air to circulate. Thirdly, this cover has zippered sides to allow service to side bays when it is covered. Fourth, the cover has a large zippered opening n the back allowing easy ingress and egress with the cover on. ADCO covers have a very narrow door opening. As far as fit, this cover fits much more custom on my Lance 1121 ( 11'-6" bed length). The ADCO fits much baggier. This fits custom. That being said, I think it would be a real squeeze to fit a larger camper than this one into this cover. My Lance has no "basement" thus fitting lower to the truck. It also doesn't have the higher ceiling over the cabover bed that the newer ones do. This cover (Large size) barely fits the cabover portion in length and height. I don't know how it could fit a higher style one like the new campers have. Shipping was very fast. I will update this review in time to see how it wears.

Works great . Best tip for use is to allow the cover to hang loosely and don’t try to cinch it tightly to the camper . It works like a balloon with the exhaust ports at the top . It will float on the camper while keeping it protected. If you try to cinch it tightly it will rip and tear , also use zipper lube on the zippers to prevent damaging the zippers.

Good cover, and I like being able to roll up sections should I need to access that side/end of the camper. My only grief is that when any side is up, the wind can blow it off. It would be nice if the corners could be secured to the jacks with hook/loop so even with the sides and back rolled up, the top would stay on and centered. Otherwise, well made and waterproof.

Our PolyPro 3 RV Cover For 6-8' Campers Truck Camper Cover fits our 2019 Adventurer 80RB truck camper perfectly. Our last cover (A different manufacturer) did not fit well and the wind tore the stress points beyond repair. The cover would have lasted a few more years if it had fit better. In addition this cover has vents and in the worst of winds I am not concerned for the cover. Since most of the covers are made from the same material, FIT should be at the top of your list and then vents. Update: I tried to use the 3 year warrantee after 24 months. (I only asked for a discount on a new purchase, not a new cover) Filled out the online warrantee form with pictures of the tears.st The tag that is sewed to the cover was faded and could not be read. (I sent a picture). They gave me the runaround... wanted more pictures and another warrantee form. Tip: Either cut the tag off and stow it away or take a photo. I like the cover and will probably purchase another BUT I am not impressed with the warrantee process. Lowered the rating to 3 stars. UPDATE: After some hesitation, Classic Accessories has agreed to send me a replacement cover. I am changing my rating to 4 stars. I do like the cover much better than others I have purchased.

I really like the way this cover is made. It remains to be seen how well it will hold up over the years. I decided to buy this one which comes with a 3 year warranty instead of a custom made sunbrella cover which comes with a 6 year warranty but costs more than 4 times. I like the way the top is constructed and I'm hoping it will stay together better than my previous cover which came apart at the top. I also really like the zippered panel in the back which allows me to roll up the entire panel for access to the back. My previous cover only came apart for the door section and was clumsy to open and close. The cover also has zippers for both sides but I am not sure I will use these. It was very easy to install. I just opened it up on the top of the camper and rolled it out to the corners letting the ends fall over the sides.