2 L deep Base LF Primer deep Base Universal Ready to use Primer RM04
Description
- DEEP BASE LF RM04 WATER-BASED BASED BASE FOR VERY STRONG SUCTION SUPPORTS Solvent Free REDUCES AND REGULATES THE UNDERSTAY SUCTION REDUCED FREE-FROSTABLE WATERPROOF EXCELLENT
- UNDER CEMENTS AND ADHESIVE BASED COLOURS AND WALLPAPETS UNDER TILE ADHESIVE
- ON CONCRETE ON CEMENT AND PLASTIC PLASTIC PLATES
- The Deep Base LF is used as a priming agent for substrate solidification to increase adhesion before subsequent layers. DEEP GRUND LF is recommended for old and new absorbent surfaces such as concrete, gas-concrete, plaster (lime cement plaster, plaster), panels (cement boards, plasterboards). Suitable for heated floor constructions.
- It is an ideal product for old and new surfaces as a pre-treatment for subsequent paints, plaster, wallpaper, screeds and cement adhesives. It is suitable for vertical and horizontal surfaces both indoors and outdoors. The product is free from coalescent and solvents. Hardly film forming after drying out it causes the hydrophobing of the subsoil. Water vapour permeable It does not harm the environment.
- ›See more product details
Substrate processing: the surface must be dry, clean, free from dust and grease as well as without old layers of paint or fine elements that can affect product adhesion. Dirt and non-sustainable layers must be removed and supplemented with suitable material. Instructions for use: apply the deep base LF with a brush, roller or suitable sprayer. Complete the underground waterproofing at ground and recirculation temperature from +5°C to +25°C. The drying time of a coat is from 0.5 to 2 hours. For particularly absorbent surfaces, the primer can be done twice. The waterproofed area in the outdoor area protects against sunlight and weather influences such as rain, snow and frost. Consumption should be determined based on samples depending on the absorbency of the substrate. Do not continue the following works until the priming agent has dried out. Technical data: colour - milky white consistency - liquid pH - 8.0 - 11.0 density [20 °C] - approx. 1.1 g/cm3 Number of Layers - 1-3 Consumption - from 0.01l/m2 to 0.20l/m2 Air - and Underground Temperature for Application - from +5°C to +25°C Drying Time - from 0.5 to 2 hours to Date of Manufacture - Brush, Roller, Spray Device Storage - 12 Months
Common Questions
Trustpilot
3 weeks ago
1 month ago
