TV Wall Mount for Most 32-65 Inch TV, Full Motion TV Mount with Dual Arms, Wall Mount Bracket with Swivel and Tilt, Fits 16", 18", 24" Studs, Max VESA 400x400mm, 99 LBS, MD2380-24K

Overall this TV mount works great. It was fairly easy to set up, is easy to adjust, and seems sturdy. The most important feature is that this mount allows you to center your TV almost exactly where you want it, even while the TV is pushed all the way back against the wall. With another mount I tried, and many others from what I can tell, when the TV is pressed back against the wall, you are at the mercy of where your wall studs are located. I am surprised the description on this does not clearly indicate this can be done. With many other mounts, sure, you can adjust the position of the TV back and forth, but the TV has to be pulled out from the wall in order to do so. Because this mount has extender brackets, you can mount the center of the unit pretty much anywhere between two studs, although I think this would only be the case with 16 inch studs. In my case, I added the extender brackets to only one end of the mount, which allowed me to center the TV almost exactly where I wanted it. You are limited a little bit by where the holes are, but you should be able to get it exactly centered, or at least within less than an inch of center if the holes aren't exactly where you need them. Also, when you attach the TV to the mount, you can mount it slightly off center, so you could fine tune in that manner (maybe an inch or so either way, depending where your TV inputs are. Other than that, it's a TV mount and does what you'd expect it to do. The amount of swivel depends, I think, on the size of your TV. If it's larger, it's not going to swivel quite as much until you are limited by hitting the wall. I have a 40" TV mounted and I am able to swivel more than the advertised 45 degrees. If your TV was smaller, you could probably swivel almost perpendicular with the wall. Swiveling and side to side movement can be done on the fly, but up/down tilt and leveling has to be adjusted with a tool.

Bought several different types of this brand and have never been disappointed. Easy to install and very smooth operation. All bolts, spacers and lag bolts are supplied and are good quality. Would buy again and already have. Hope this helps.

The Mounting Dream MD2268-LK TV Wall Mount Bracket is a dependable choice for those seeking a straightforward and cost-effective way to mount their television. Designed to accommodate TVs ranging from 37 to 82 inches and supporting up to 132 lbs, it offers versatility for various setups. Installation: Installation is user-friendly, with clear instructions and all necessary hardware included. The mount is compatible with 16", 18", and 24" wood studs, providing flexibility in placement. Its low-profile design positions the TV just 1.5 inches from the wall, offering a sleek appearance Build Quality: Constructed from heavy-duty steel, the mount feels sturdy and secure. Its UL certification adds an extra layer of confidence in its safety and durability. Pros: Supports a wide range of TV sizes (37–82 inches) Low-profile design for a sleek look Tilting feature reduces glare Easy installation with comprehensive instructions Cons: Limited to tilting; lacks swivel or full-motion capabilities Rating: ★★★★☆ (4.5/5) Overall, the Mounting Dream MD2268-LK is an excellent choice for those seeking a reliable and affordable tilting TV wall mount. Its robust build and ease of installation make it a standout in its category.

This is by far the most complete kit I have ever used to wall mount a new lage 65" samsung on the wall. The mount will let the tv pull out from the wall, slip side to side angle a large amount left to right, Allow you to adjust the tv's tilt angle. There is no assembly of the wall mount and it comes with all hardware you need to mount to drywall with studs, brick, stone, even concrete. Find your wall studs and mark them. Determine the height on the wall you want the tv. All fasteners to mount to wall are included. using the supplied kit of screws and spacers mount two bracket to back of tv, very simple. Hang tv on bracket and tighten two already installed locking screws. You will need a phillips screwdriver, socket wrench, tape measure. There are only three steps from start to finish. Holds up to 100 pounds and works .perfectly. It honestly took me less than 45 minutes from start to finish. It operates super smoothly. A great product for the price.

I bought this mount because I wanted something for 24” stud spacing and I wanted sturdiness and the TV positioning this mount offers. I did not want extendable arms to enable the 24” stud spacing. I wanted a one piece mount. It also has vertical members at the ends that I thought may help for attachment. I mounted on metal studs and felt 4 screws wouldn’t be enough. The mount is heavy due to the pivot hinge. Appears to be fairly well constructed. The metal frame was fairly soft which actually helped as I added 3 self taping screws at each end to help the fastening of the 4 included lags to the studs. Studs were actually a tad over 24” oc. Now the ding of one star. The brackets that mount to the TV lock into the mount rails by screwing a clip. Instead of providing a thumb screw they provide Phillips bolts. Every mount I have purchased in the past has a type of screw to make this part easy to lock the TV in. Not this one. Even though the mount extends from the wall you would need to squeeze in between the tv and the wall to install these screws with a screw driver. I decided to buy thumb screws instead of trying to get in there behind an 85” TV with a screw driver. So for over $100 they should have thumb screws. Cost me $10 bucks. Thus 4 instead of 5 stars. Also I didn’t see a template as advertised. No big deal. Added note. I installed drywall anchors to hold up the mount when positioning it and anchoring to the studs. This made a big difference. Easy to set these drywall screws level and set in the slots on this bracket. I just put these screws in and left them sticking out a bit and hung the mount on the screws. I had to slide the mount on these screws slightly to hit the studs. So this method really helped me mount this thing.

This TV Wall Mount was easy to install with all the hardware included. I like that the mount can be tilted up and down, it can also be moved from side to side. I already own two of these and have no complaints. One of my TV's is very heavy and this TV Mount can handle it. See pictures so you have an idea of how it would look if you were to buy it.

Excellent product when you need the option of doing 16, 18 or 24 inch center studs. Also much heavier duty than the other ones that I’ve purchased on here you could probably put a 75 to 85 inch TV with no issues at all.

This was the easiest TV mount I've ever installed and I have 9. Comes with a wall template, making placement easy. I set it all up by myself. I don't recommend it, TV was a little uncomfortable. Great movement, I love the design, as you can aim it and tilt it to any direction, which really helps viewing.

Muy buen soporte para TV que puede usarse para distintas medidas. Sí es algo laboriosa su instalación si lo va a hacer una sola persona PERO el cuanto a laboriosa calidad y versatilidad del producto lo pongo 5 estrellas

Mounting Dream TV Wall Mount TV Bracket for Most 42-90 Inch TV, UL Listed Full Motion TV Mount with Articulating Arms, MAX VESA 800x400mm 132 lbs. Loading, Fits 16", 18", 24" Studs MD2298-XL Excelente soporte para TV, lo compré para montar una TV Samsung QLED 85" y si le queda. La guía / mapa de perforaciones es la que hace toda la chamba de precisión y perforación, no necesitas estar midiendo, trazando y cargar el soporte para presentar en el muro, la única medida que requieres es la que inicia del piso hacia arriba, con esta guía me ahorré $1,000 MXN qué me cobraban por la instalación. Trae tornillos y espaciadores de todas las medidas, no hay pierde en que le falten piezas, además trae 4 tornillos para fijar en la pared, pero como soy algo paranoico con este tipo de aparatos, le atornillé 8 tornillos más, para un total de 12 tornillos con sus respectivas rondanas y taquetes (Que no se incluyen con el producto) La única ocasión donde se requiere dos personas es para subir la pantalla al soporte y realizar el atornillado final (2 tornillos qué fija la pantalla con el soporte previamente atornillado al muro). Lo único malo es que las instrucciones están en 90% inglés y el restante en español qué corresponde a la presentación del producto (O sea, nada), pero hay videos en YouTube de como realizan la instalación de este soporte.

I only got 1 of the 2 brackets delivered.

Toda su manufactura es buena solamente no me gusto que el cuello donde todo descansa es muy delgado. Pero aun asi soporto muy bien mis casi 80kg sin problemas para probarlo y la tele pesa 70kg.

Llego a tiempo.