BESTTEN 5 Pack Screwless Decorator Wall Plate, 2 Gang Decorative Outlet Cover, USWP6 Gloss Snow White, H4.69” x W4.73”, Faceplate Cover for Receptacle Outlet & Switch

Look great, well made, nice gloss finish. They sit nice and flush. It dose take some adjustments with the outlets to get a perfect fit. Receptacle rubber spacers a must. Finished look is amazing

Sleek easy to install

These are really nice looking for the price. I was re-doing my whole house, and the Lutron plates were just too expensive. These look very similar in color and function just as well.

These look good and function pretty well. The downsides are 1) sometimes the screwless covers will not snap into place on the base easily with all snaps connecting. It took a fair amount of tweaking for some and 2) they’re not easy to remove. You have to pull and bend pretty hard to snap off. That said, none of them broke with the bending to get off, so that was good.

I had purchased the same style cover from the big green box store, NOT GOOD didn't fit right ! These went on good and looks great!

These are great. Slightly larger than the brand name plate that is everywhere, so just replace all your plates if you are worried about matching. Works with smart switches too, except weird shaped ones like Sonoff, but if yours look normal, this works. If you have never done hidden screw cover before. Read this. It is so easy when done right, but the complaints here are from people who just do not know. 1. Outlets use square tip screw, not Phillips. Get the right tool for the job. 2. Loosen the outlet from the box about 1/8” 3. Push two screws into the backplate. They recess. So literally pull the plate out of the box as is and push the screws through. 4. Separate the backplate from the front plate 5. Remove protective plastic from front plate 6. Attach back plate to outlet. Tighten it all the way until it is tight, but plate doesn’t flex out of shape 7. Tighten the outlet screws until the plate sits flush with the wall. Do not over or under tighten. 8. The top plate goes on one way. It has a TOP label. The slot in the cover goes down if your eyes are too bad to read. Push it on until it snaps in. Work your way all the way around. 9. If you screwed up, use a flathead in the bottom to remove the plate. Twist to separate, then move the screwdriver around the inside edge until all then snaps loosen.

These are cute, though a bit tricky as others have said. If you have an older place, I'd suggest maybe sanding down or patching the wall holes a bit beforehand, and not always fully screwing the outlet/switch itself all the way in (that's what will give you more of a gap/bow on the plate). The cool thing is there are spaces left open to loosen the actual outlet screws and try to adjust it while attaching the plates (reduce gap/bowing some). Weirdly, there are zero directions but it's easy enough to figure out. However, the first one I tried to do backwards and it sat MUCH more flush/sturdy because there was no gap. **All the manufacturers would need to fix this, is to make the mounting piece solid all the way through or flat without the lip, instead of having the open gap area in back which allows for the bowing. Or just have the 4 corners screw right in to the wall.** I contemplated siliconing them to the wall instead, so might try that if some of the gaps are still bugging me. After some practice, I was able to adjust some of these to fit more flush, so might go back to the first few for adjustments. Not super well designed but they look sharp for an upgraded look without metal plating, and I do like them enough to keep them. I'll be ordering more and hopefully the double rockers will be back in stock soon! I'm going for a transitional style, so mixing the black and white turned out just how I wanted 😁 Hopefully can add some decals next.

These plates offer great value for the price, but they have a few issues. I’ve been using them on outlets, so I'm not overly worried about them falling off, unlike with wall switches that get touched daily. However, I won’t be purchasing more of these in the future.The main issue is that the cover plates don’t click securely into the back plates. Either the back plates need to be a bit thicker to accommodate the cover plate prongs, or the prongs should be longer to ensure a better fit. As a result, most of the plates feel a bit wobbly.On a positive note, they do seem durable, and the color is nice. Overall, while they work fine for outlets, they could use some improvements for a more secure fit.

Hard to find. Looks great

Look Nice but do not fit on the wall; Don't buy for other than dimmer

Very good quality, recommended, installed and it is look very nice

Look great, way cheaper than Home Depot and they’re exactly the same product. No screws is a sharp look. 10/10

Easy to install even for someone that wouldn't consider herself "handy" lol. The price is right and the look is sleek and modern. Highly recommend swapping your light switch frames for these to make a big impact to your room for a small price. Have switched over my whole basement to these screwless frames and will be doing my upstairs rooms next.