Scosche MagicMount Pro Magnetic Phone Holder for Car with 20W USB-C + 12W USB-A Charger, 12V Cigarette Lighter Socket Cell Phone Car Mount Compatible with iPhone, Samsung, Android, Non-MagSafe Devices

This is the second time I have ordered the same product. The first one is in my personal vehicle, and I’ve had it for three or four years. I can remove it to clean the windshield, and yet it still fixes firmly to the windshield. Because it was so fantastic, I bought a second one for my work vehicle. Again, super easy to apply and it doesn’t move one iota. I tried many other similar products, but none of them were as failsafe as this one. Outstanding product.

I love the idea of the magnetic phone mount, but have found most to be not quite strong enough to handle bumps and turns. This "Pro" model is definitely the ticket. The magnet is super strong - and it works through my LifeProof case. Also, the suction cup has a gummy liner that helps it stick to the window. It hasn't failed me yet, and we've had several 95+ degree days. I've purchased several phone mount solutions - this one is definitely my favorite. NOTE: The I first purchased the regular model for my work truck at a local Target. I loved it so much I came online to get a second one for my personal vehicle. I found the Pro version only online. I absolutely recommend getting the Pro model. It's just a better product overall - stronger magnet, better construction, better product.

I’ve had this product for about two months now. Hands down, this is the best cell phone mount that I’ve ever owned. I’ve had air vent mounts, windshield suction cup mounts with extended arms, and mounts that clip phones in place. This is the easiest one that I’ve ever used! The suction cup is the best I’ve ever encountered and fits perfectly on an almost-flat smooth surface in my 2011 Kia Soul. I don’t have to fuss with any mounting hardware to place or remove my phone...it’s all magnetic, which is probably just as secure as any other mounting setup I’ve ever used. I would buy this again and again. Oh, and one of the best parts for me is that there is this little plastic strip that you put under the sticky magnet to apply to the back of your phone. That thing stays in place, but is also able to be repositioned and maintain the same/similar stickiness. I absolutely LOVE this product.

Scoshe was one of the first innovators of decent cellphone holders for cars and when being a rideshare driver, you really need good product. With that being said, they are the only company that makes a cigarette lighter plug in with a magnetic holder. The problem is that within a month, the mount that goes in the cigarette lighter starts to wear out and then twists or rolls over. I just have to keep uprighting it and shoving back into the socket. Also, they only have 4 cheap magnets in the head. How about spending a a little more in better magnets and a better holding system. I wouldnt mind if they only lasted a year but they dont. I have several of these and they make two models. The cheaper one has a defect where the internal nut that holds the mount backs out and then its done for. How about spending a penny and put a lock washer on that bolt? Problem solved. Ince the but backs out, you cannot take it apart to screw it back in. Beleive me I tried and then broke it apart to see why. No lock washer on an item that has a nut and bolt that moves around is pure stupidity on a design. Get with the program and fix this.

I bought this mount in September when the heat in Japan is unbearable, mounted it on the windshield and it has been there ever since. Never fell off, it is winter now temperature goes below 32F/0C, so I can say that it has been performing flawlessly year around. I have removed it only once, at the beginning when I was trying to find the best position for it, so if you keep removing it perhaps it will not be as stable as it is for me. I put the metal plate between the phone and the cover and it is strong enough to keep the phone in place, my phone is a OnePlus 5T, so it is 6 inches in size, it never fell off the mount, granted roads are rather smooth here in Japan, very few potholes if any. I recommend the mount, it's has been a great product for me.

I had to return the first unit because the suction cup did not hold. As per usual, Amazon shipped a replacement promptly. The new one works great so far. As of now I have used it for a short trip, and it worked flawlessly. I will update this review once I have used it for a longer period of time. I use it with a Samsung Fold 3 (a fairly heavy phone), and the magnet held great over mildly bumpy roads. I like it well enough that I ordered a handlebar mount version for my bicycle. I will review that as well. I went to take a picture of it on my car with the phone attached, and the stick grip pad had fallen off the dash with just the weight of the mount on it. The mount was still attached to the stick grip pad. This may have been because I did not give the stick grip pad enough time to cure. I have re-attached the stick grip pad with nothing attached. For now, I will tentatively give it a 3-star rating. Tomorrow or the next day I will re-evaluate and change my rating. Hopefully, I will have better results and can up the rating. A note about my first experience (suction cup not holding): For the second one I affixed the stick grip pad on slightly different part of the dash as I noticed that the part of the dash where I mounted the original has a slight bend toward the front. So it could be that I caught that bend with the front of the stick grip pad, and though the stick grip pad stuck fine, if the front was indeed 'bent' it probably would have prevented the suction cup from making a good seal. (I may test this theory, since I have not yet returned the original. If it turns out the issue was operator malfunction, I may keep the original for my wife's car). So, make sure you mount the stick grip pad to a perfectly flat surface if you are using it. Another note: I might have tried just affixing the suction cup to my windshield, but the arm is not long enough at full extension for that because of the severe rake of the windshield on my 2006 Corvette. 8/14/2023 Update: After letting the stick grip pad adhesive cure for 24 hours, It stayed on for a while but after about 48 hours the grip stick fell off after about a day and a half. It is summer, and it could be the adhesive loses its adhesion in the heat. Another minor issue is that with my Fold 3 attached (a fairly heavy phone where I could not apply the metal plate in the center because of the fold), The phone tends to tilt a little as I hit bumps, so I had to reposition it occasionally. Magnets that were a little stronger might help. It did not fall off, however. For these reasons, I will leave the rating at 3 stars. Decent Item; could be better. I have not decided yet whether to return the item or keep it and live with the above issues. I still like it better than my old cradle based mount.

Loved this phone holder. The position on my car was perfect for me to check on maps, the hold is strong and my phone won't move, easy of installation and sturdiness worked so well. One thing that didn't work in my car was the disk they provide to connect to the dashboard. I didn't have a free straight surface for this part to work, so we connected to the glass which worked perfectly.

I've used the older Scoshe magnetic mounts with success but I liked that this one has pivoting head and a stronger magnet for larger phones. It was nicely packaged and everything seemed very nice. The tightening nut seems to be a hard plastic with a soft rubbery coating but it tightens nice and securely. I appreciate the inclusion of two faceplates and while the silver is nice, I much prefer the subtlety of the black. I'm weary of using adhesive products on my dash board and while you can see that it actually mostly fit into the single din tray, I decided to mount it on the passenger side dash facing the driver. Also, mounting it in the tray would block the majority of my head unit so I didn't want to block it. It went on ok but despite the bendable portions of the mount, my first attempt didn't go as well as I would have hoped. The curves of the dash caused part of the adhesive to not hold well. Since I wiped the dash down well with the alcohol swab provided, the adhesive lifted without too much of a problem and I reapplied it in a better position. It has held in the new position well and I have not been concerned about the fact that I removed it once and reapplied. I applied the metal plate to the back of my iPhone 7 plus case so it holds very well. I found that due to the positioning of the mount, it puts less stress on the adhesive to remove the phone from the mount from bottom to up as opposed to side to side. I imagine people will see similar results depending on how and where they mount this. While I so far trust the adhesive I wouldn't want to put unnecessary stress on the adhesive so I would warn against using it indelicately if it's been in the hot sun for a while. One thing I never really cared for about these mounts was that the rubber used would collect a lot of dust and lint and look messy. Since this mount comes with two removable faceplates, I cut a small piece of microfiber cloth and set it under the faceplate. The microfiber looks cleaner and nicer in my opinion and you can see for yourself in the pictures I posted. The one warning is that if you are using your magnetic plate under your case, the cloth may be too slick to hold onto your phone well. For my phone with the plate on the outside it holds great and actually is easier to turn into landscape easier without removing it from the mount. I like the mount but I have a hard time seeing twice the value here compared to the standard Scoshe mount at around $14. It is still a great mount that does what it is intended for but what I really appreciated about the original mounts was that they were reasonably priced for a great mount. In the end it holds strong to my dash and my phone and I appreciate the bonus removable face plate as well as the functional ball joint that allows for great positioning that holds extremely well. I docked one star just for the price but if the price doesn't bother you at all then consider this a 5 star mount that I can easily recommend.

holds my phone very well, solid design

El mejor soporte

After trying 4-5 useless plastic gizmos, found this item while searching on youtube, its perfect. I mount the foot vertically on the dash so I had to screw 2 little bolts but I have 2009 car so I didn't care, I just wanted a strong hold, have to say that I didn't even try with only the 3M adhesive. For the metal plate and the magnet part, its pretty strong. I'm very please with the result.

I liked this product because it is strong and very good to use.

Moyen sa colle pas super sur une table pour le c’est assez bien