PLX-1000 Professional Turntable 10.80 x 18.60 x 22.30

I was looking at a Technics or this turntable. After a lot of reviews said this sounded as good and was cheaper, I went with the Pioneer. So far it sounds fantastic. It's a heavy unit, but takes up the same about of space as most Turntables. Setup isn't hard, fine tuning is a little more difficult, but not to hard. It does not come with a cartridge. I paired it with a Audio Technics AT-VM95ML. You just connect to the 4 poles and slide it on the arm. Even with buying the Cartridge it was cheaper than the Technics of the same capabilities. Assembly of the table is as simple as putting in the table. You get different tops if you want to listen or DJ And scratch. So, something for any use. The player is well laid out and has slot for the 45 adapter. As I don't need the DJ options I just reset everything to defaults and played records. The instructions included and online can walk you through a proper setup. The player does not come with an equalizer or amplifier. My receiver has a Phono input so it plugs right in. If you don't have a Phono input you'll need an external device to get the sound to line level. It comes with a RCA cable and ground wire. It does not have auto return at the end of the record. Once everything was set I tried rock, jazz, classical, and it all sounds great. The lights blue record and a white needle light at not a distraction and the needle light can be turned off. Overall, a nice turntable for home use. I'm getting back into records and this was a nice compromise between a beginner turntable and spending over a $1K for a decent turntable. All seems good to me.

I've been spinning vinyl for over 50 years as a budget conscious audiophile. Had everything from portable 3-speed record players, Dual 1219, belt drive Pioneers, and now this Pioneer PLX-1000 DJ deck. Also have a 3 year old Rega and an early 80's Sony DD with the "Bio Tracer" tone arm. From my home audiophile perspective, this turntable equals and exceeds my performance expectations. Audiophile desired features include: RCA output jacks, quick disconnect power, VTA tone arm adjustment, improved sound deadening in the base and tone arm, and a common easy change head shell on an "S" shaped tone arm. All features an audiophile may want in a sturdy, precision DD turntable. I have extra head shells with cartridges with my favorites being the AT7V MM and a Denon 301MKII MC. This deck keeps rock stable speed and is dead quiet in use, with NO tone arm bearing issues as a few have mentioned. I find this deck to be well made, well designed, and operates with precision, especially at this price point. These OEM clones of the original Technics 1200 decks share many similarities, but they each have their brand name signature on them, some better than others. The Pioneer PLX-1000 fills the need for most audiophiles on a budget. A recommended "Buy" for this use.

Great product, really good performance for Dj’ing

It's worth it, if you're thinking of buying the Pioneer DJ PLX 500 save your money and buy this one. It's so good and is worth it even if you have to buy your own cartridge for the head shell, if you're looking for a home turntable or DJ the Pioneer PLX 1000 is the best for your money the speed is on point both for the 33rpm and 45rpm with the amazing motor that it's rocking. I love the look, the blue strobe light is the best and so far the sound quality is amazing rocking a Ortofon Concorde Music Blue Phono Cartridge. Over all the function is simple and easy to use.

I've recently returned to listening to vinyl records and conservatively started out with the entry-level, budget friendly Audio Technica LP-120 USB turntable. However I quickly outgrew it. In my search for a new one, I did a lot of reading and found audiophile reviews praising the qualities and features of the Pioneer PLX-1000. It's built for DJ's yet has all the features loved by audiophiles. It's solid with very low vibration. In comparison to the AT LP-120, the PLX is much heavier AND quieter. The LP-120 is noisy. I instantaneously noticed there's more bass and it's deep, detailed and rich. The bass came alive. The LP-120 comes with a pre-amp and the PLX 1000 does not. The AT comes with a stock AT95E cartridge and head shell and the PLX provides a head shell but no cartridge. I actually didn't mind because I never used the AT95E cart and immediately upgraded to a Sumiko Pearl and Nagaoka MP-110. I'm thinking about upgrading to the Nagaoka 200 now that I have a table worthy of it. The RCA cables are attached to the AT LP-120 and removable on the PLX. When I bought my first component stereo system decades ago, direct drive turntables were favored and more expensive than belt driven. I had a belt driven because I couldn't afford the DD. Today, I personally don't want to deal with belts when switching from 33 to 45 or spend more $$$ for the automated feature. Which reminds me, the AT has a 78 but the PLX does not. If you're looking to upgrade your table, take a look at the Pioneer PLX 1000.

I was shocked by the high quality fit and finish of this table for the price. The platter is completely flat and well damped with rubberized material molded-on to the underside. The controls are smooth with an excellent tactile feel to them. The unit operates in dead silence - no white noise, humming, buzzing etc. The all-aluminum table seems to weigh around 40 pounds. The cueing lever is very smooth and easy to operate. If only it had a two-tone or silver finish to the base, and a hinged dust cover.

Excellent. Paired wit ATVM95EN cartridge, superb combo. LPs come alive. Music jumps at you. Outside of setting vta no adjustments needed. Plug and play. The quality, build and ease of use are incredible. Youtube shows some people have issues with tone arn bearings being loose on unpackaging. Others complain about tracking. Musy be older units. My tonearm bearings are as smooth as oiled glass. Tracking is dead on. Actually worth twice the price.

Top notch functionality and engineering, silent, robust, the only thing I miss is s reverse function

The product was defective and I continuous humming sound was coming out of the turntable so I and to return back the equipment

E excelente porém feita na china. Caso contrário custaria o triplo. se gostou de um like.

Tube unos technis m5g... Y estos son muy parecidos... La verdad son muy potentes versátiles con el +-8..16..50... Y el tacto al po er un disco es.... Maravilla!!!!

Received my Pioneer PLX-1000 month ago. The TT quality is good. But be prepared for some custom adjustment. There are some differences from "parent" Technics TT. The minimum cartridge height for this TT is 19mm, but lot of cartridges have the 18mm height. So, it was required to use 2mm shim with Ortofon cartridge to correctly set VTA. Also the overhang is 54mm instead of 52mm, so its not possible to use the Technics Needle Adjustment Gauge. Overal this TT is excelent.

Piatto professionale per dj realizzato con cura dal noto marchio. Lo chassis è piuttosto pesante e ben isolato da piedi regolabili per una messa in bolla fine, a garanzia di un ottimo isolamento dalle vibrazioni. Molto preciso lo strobo. Classico braccio a “s” con attacco a baionetta per la shell (in dotazione ma senza testina). L’ho comprato per utilizzo hi fi, quindi non userò le funzioni di pitch control se non per la curiosità di qualche breve esperimento, ma non ho trovato di meglio a questo prezzo, almeno a mio parere. Con la puntina giusta suona molto bene. Io ho montato una Ortofon 2M red e mi piace già così, ma è un piatto che potrebbe meritarsi anche una bronze o una black. Molto soddisfatto soprattutto in relazione alla cifra sborsata.