Harman 3-20-677200 Finned Heating Cartridge Igniter Element for Pellet Stove Models Absolute 43 63 Accentra 52I 52I-TC Advance Allure 50 P35I P43 P68 PF100 XXV XXV-TC 3-20-06783

Perfect fit with more heat fins to insure a quick fire start. My old igniter was still working but sometimes it would not start the fire on the first pellet cycle. This made the stove run a second cycle of pellets before the fire would start. Then the pellets would fall over the edge into the ash pan causing smoldering and smoke in the room. This new igniter has been working great no more smoke in my room and fire starts very fast now. When installing make sure to remove zip ties on old igniter wires. Also make sure the igniter wire connectors are out the way of any high heat areas. Thank you

The igniter has 15 fins while the original had 13. On the new one the fins were pushed tighter together which allowed a lot of slop length wise in the cradle. I ended up pulling the end fin (there pressed on) down towards the end opposite the wires to tighten it up in the cradle. Other than that it fit good and the connectors were the correct size. The stove fired right up. As of the review it has started twice, so we'll see how long it lasts.

This was defective out of the box, it blew a fuse immediately as soon as it was installed (and the fuse was a 6amp glass fuse not carried by any of my local stores, so now I need to wait on a replacement ignitor and replacement fuse), when I tested it afterwards with a multimeter it was measuring 0 ohms of resistance, so it was short circuited out of the factory. It also appears to be fairly poorly made in general, it has far fewer fins than the original and they were very unevenly spaced.

Fit correctly. Worked all winter long

Works so far. Bought stove new and the igniter I took out was 16 fins. This one had 15. Fit a little loose in the cradle, it slides a little bit but I routed the wires so they weren't touching anything. Fingers 🤞.

Harman P61. Part fit and worked. No idea of longevity, will try to update after some time.

Got the stove going without having to use a torch or gel. With a 2 year warranty great product. Watched YouTube on how to install. Looks a little different than the original but it works.

Exact fit works great