Minwax 47500000 Tung Oil Finish, pint

This works well for reviving the finish on bare wood furniture. It gives it a nice, rich matte finish. It can be used as the only finish when refinishing bare wood. The finish is fairly durable but you still want to be careful not to get it wet.

This is real oil and works great with wood. It took a bit of time to get it, but it worked fine.

Excellent product. Easy to use, great result

I used this for a full wall of mahogany cabinets in my primary bathroom. It is a good finish. Just remember to use a buffer after the final coat is dry. It will bring out the finish nicely. Also note, this is NOT 100% tung oil. This is a finish which basically stays on the surface of the wood. If you want true Tung oil, the dry/cure process is 30 days minimum, but it is way stronger and water resistant because it penetrates deep into the wood. So, make sure you figure out what you need. Also, I don’t recommend putting this tung oil finish on wood that pure tung oil has already been applied to (and vice versa). The finish just peels right off. Sadly, I speak from experience. But, hey, I learned a lot! ;)

We have a wooden vanity surface with a raised bowl type sink, so we want to make sure the wood is well protects. In addition to the finish done by the cabinetmaker, we applied a coat of this. I thought it was going to be like oiling a wooden surface, but it's more like a clear coat matt finish that hardens. With just one coat, I get the feeling water would have a heck of a hard job ever getting at the wood. The coating made the wood look even richer. And then I also use Pledge over the top of that, just because I can. The Pledge adds it an even silkier feel and still richer color. Wouldn't need that last step, but why not? :-)