Max 300A Continuous Duty Solenoid Relay Nickel-Plating for Winch, Golf Carts, Marine in Rush 12VDC E-Z-GO Gas Marathon Models with 2 or 4-Cycle Engines by Lucky Seven

The Max 300A Continuous Duty Solenoid Relay by Lucky Seven has been a solid addition to my Humvee setup. When you’re dealing with higher current applications, reliability isn’t optional—and this unit has delivered exactly that.From the start, it’s been consistent and dependable. It engages cleanly every time with no hesitation, which is critical when you’re running accessories that require steady, reliable switching. No intermittent issues, no weak engagement—just solid performance.Build quality is what you’d expect from a heavy-duty solenoid. The nickel-plated terminals are a nice touch, helping with corrosion resistance, especially in environments where moisture or exposure can be a factor. It feels robust and well constructed, not like a cheap component you’ll be replacing anytime soon.Handling high current loads hasn’t been an issue at all. It stays stable under continuous use, and there’s no sign of overheating or degradation in performance.Installation was straightforward, and once in place, it’s been a true set-it-and-forget-it component in the system.If you need a reliable, high-current solenoid for a vehicle, winch setup, or similar application, this one gets the job done without drama. Strong, durable, and consistent—exactly what you want. Highly recommended.

I was worried about quality after reading reviews.This relay is equal to Trombletta 974-1215-010 12V/Cont except you will need to use M5 nuts instead of 3/16" for coil (included in package).I left it on 14.5V DC for 24 hours and coil current didn't increase nor relay heated up enough to melt plastic. It takes 0.6A vs 0.8A Trombletta - so, it runs cooler.Don't unscrew nuts already installed on relay! (I took old one apart). Relay came with set of nuts in a separate bag inside the box.Make sure you have 14.5V or less on small bolted contacts of your old relay before you purchase this 12V DC version. Some negative reviews sound weird... There are 24V and 36V versions of the same relay. So, they probably put 12V relay in 24-36V control.

Worked perfectly no issues

bought 2 so I would have a spare, first one post was loose broke inside, second one ohms closed all the time. so 2 of them both defective.

This was not as shown in the listing. The finish was dull, and not polished nickel plate as shown. The threads on one post were damaged and there was no documentation or labeling other than "12 volt". It is working and was inexpensive.

Worked exactly as it should,no problem with it

My Jeep sits a lot so I used this to isolate my radios, switches, etc when the key is off to avoid battery drain. Works great and it’s been on there over 2 years

I have this solenoid on an air pressure switch for some pumps. So far has been great mounted in a battery box exposed to the elements.