Vibrelli Bike Wall Mount - Horizontal Storage Rack for Hanging Bicycles in Garage - Adjustable Bike Hanger, Holder - Wall Bike Rack Hooks for Bicycle

Very good quality. Easy to install. Great value for the money. Great space saver. Easy to adjust to fit bike frame.

This item was easy to install and is very sturdy. I was concerned that I would need to extend it all the way out to allow ample room for my mountain bike’s 23 inch handle bar, but I only needed to extend it minimally. When you turn your handle bar at an angle, you’ll have plenty of room. It’s great to finally get my bike off the garage floor. This item is an excellent space saver.

Easy to install and very sturdy. Quality seems good. Have been using it for a couple months now and haven't had any issues. Looks nice and keeps my bike safely on the wall.

The rack is pretty sturdy. It has a total of 4 good sized screws to hold it on the wall. Further it comes with all mounting hardware including screws, washers, & lags (should you need them). Mounting is not difficult. my only real gripe is the lack of clearance to tighten the screws. The horizontal tube is right where your hand naturally needs to go for screwdriver tightening. I switched from a manual screwdriver to a cordless drill/driver. It worked much better but I think both should. Once mounted, there is a good range of adjustment for the frame wings and the tube adjustment that sets the distance from the wall. Although the buttons which release the frame wings for adjustment are pretty much directly behind the wings making adjustment award. My most significant dislike is the lack of padded or rubber feet for my bike to sit on. I will find some weather strip to augment the hard plastic feet. All in all this is a very sturdy rack that is adjustable and should last long time..

Contemplated a few different types of wall mounts before settling on this one. Very happy with the outcome and impressed with the build quality. We park our cars and motorcycle in the garage so the last thing we want are mounts that could possibly fail and have the bikes come crashing down on them. I don't recommend using the screws provided. They aren't robust or long enough to confidently hold long-term. They may work for some people but I wanted to decrease the possibility of failure as much as possible. Just look at the pics of others mounting into drywall only and not into studs, with the provided screws. They eventually rip themselves out of the wall. It's like seriously, did you not know that was bound to happen? I went to the local large chain hardware store and upgraded to some 1/4" x 3" lag bolts, 1/4" washers, and secured the wall mounts into studs. Mounting only into studs is crucial and shouldn't be any other option. There are 3 screw holes at the top of the mount but securing it using only one at the top and bottom is sufficient, if you're going with something like a couple of 1/4" x 3" lag bolts. If you choose to go this route like we did, use a 7/32" drill bit to drill the holes into the stud prior to mounting the wall mount with the lag bolts and washers. If you've mounted stuff before into studs, this should be very easy. If you haven't, it's also very easy to learn and do. Plenty of YouTube videos out there. One of our walls has several gym equipment, rack, and mounts attached to studs so we have plenty of experience with mounting onto garage walls. We were lucky that the location of the studs were at the right places to allow for adequate spacing between the bikes. If your studs are not in the ideal location for mounting a bike or bikes, you'll just need to get a 2x6 wooden stringer or ledger board from the hardware store, mount the board on both sides into studs, and then secure the bike mount onto the stringer board. Overall, very happy with the way it turned out. We're fortunate to have 11 ft ceilings so we were able to get the bikes up as high as possible and out of the way. The center of our mounts are 85" (~7 ft) from the ground. I'm only 5'8" and with the bikes mounted, I'm still able to reach up to mount and dismount the 2 bikes we have. Both bikes are about 27 lbs each. Highly recommend them and an extra plus for being made in Taiwan!

Excellent wall-mounted bike racks! They’re easy to assemble thanks to the clear instructions and are made of very sturdy metal. Don’t waste your time or money on racks that cost over a hundred dollars . For both price and quality, this one beats them all.

Works great. Easy to install. Keeps both bikes out of the way

Great fit. Doesn't scratch the bike. Very sturdy.

An excellent piece of engineering support tool!

Léger idéal pour mettre son vélo à l’abris dans une cave ou un appartement fixation facile

Drilled into a stud this seems very sturdy. My $2000 wallpiece will stay put. I needed somewhere to store the bike over winter out of the way, I would not really want to be putting the bike up and taking it down all the time though. Works as intended. I don't trust the cups to not scuff so I added extra vinyl tape in the contact points. Also removed front tire to avoid bumps from the front.

Excelente calidad y perfecto para sostener la bici, muy simple la instalación con herramientas básicas en casa. Buen material y se ve resistente.

This product displays my bike perfectly. Arrived on time, quality is excellent. Installed easily with hardware provided. I would like to see the rubber that actually comes into contact with my bike be a softer compound, but other than that minor detail I would highly recommend this product.