12 Pieces 5.5mmx2.1mm 2 Pins DC Power Jack Female Panel Mounting Connector Socket

I was needing power inlets that were compact in order to fit into a project without much depth, and these do the job well. The seem well made and soldered easily. It was necessary in my case to solder before fitting into a panel, and getting the nut over the soldered connections was then tricky, but bending the lugs slightly was possible without breakage and solved the issue.

Fast and efficient as always, the jack plugs are worth the money 💰

Like others have noted here the internal pin is slightly oversized which makes for a very tight fit at best, and perhaps impossible with some plugs. The plastic body is not very well matched to the metal washer and some loctite or CA glue might be helpful to keep it in place. Connections seem robust however, and at the price it seems fair depending on your flexibility for tolerances.

Nice little connecters have used most of them now would recomend

useful component, that did the job

These Female Panels don't fit at any jack. The inner diameter is much smaller than it should be. I tried 3 different jacks bought at different times and from different places and none of them fit. Not good. It has to be sanded a lot to fit.

If you're not careful they break, not the best quality.

Works as described

Only needed one to supply power to a Morly ABY pedal on my Pedal Board. Worked great. The short stud on my connectors is the negative and the long stud is the positive. Boss power adapter fits perfectly. Real snug will not come out accidentaly. Added a drop of silicone to the washer so it will not back out. Great product. Update, just purchased two Boss FS-5L switchers. I guess I will need the extras to hook them up to power them.

Works as expected. Thanks.

No issues with soldiering the connections. Power adapter fits as expected and holds reasonable well. I'm guessing the problem area will be the nut that holds the connector in place. I haven't had any issues, but if it's a permanent application I'd definitely recommend adhesive. A "removable" connection needs to be in a place where the nut can be reached and tightened occasionally.

These were excellent quality, but I really don't need 12 and will never use them, so I sent them back.

Just a heads up, these are inside negative, outside positive (if you follow the lead length conventions). This is opposite of most things in North America. I'm glad I checked before I soldered it! It's easy enough to flip around the wires. Otherwise a great product, the plastic threads worked well for me, didn't strip like I saw in some other reviews.