Advanced Graphene Ceramic Coating for Cars(70ML),12H Graphene Coating for Auto Car Detailing,10+ Years of Long Lasting Car Protection,Gloss Hydrophobicty Anti Scratch

I applied this graphene ceramic coating to my black boat, and the results genuinely impressed me. Black surfaces are notoriously unforgiving because they expose every swirl, smudge, and imperfection, so I went in with high expectations and was not disappointed. The application process was straightforward, and the coating leveled nicely across the hull. Within a short cure window, the surface transformed into what I can only describe as a mirror finish. The depth and gloss are exceptional and noticeably superior to traditional carnauba or standard ceramic products I have used previously. I waited 6 days after application before taking the boat out on the water, allowing the graphene coating to fully cure. The first real test came when I brought it back in. A quick rinse was all it took, and the surface came out completely spot free with zero water marks left behind. Every wax product I have used over the years required more effort and still left something behind, so this result genuinely surprised me. The hydrophobic performance goes well beyond what conventional wax can offer. The manufacturer claims 10 or more years of protection, which I cannot verify this early, but the initial adhesion, surface hardness, and that first post water rinse give me real confidence in the long term durability. I am including photos showing the finish after application. If you have a dark colored vessel or vehicle and want a coating that outperforms wax in every measurable way, this 70ml kit is worth serious consideration.​​​​​​​​​​​​​​​​ One last thing, the mirror finish is so intense that what you see in the photos is the reflection of my garage floor. You can even see the dirt on the floor (I haven’t washed our floor after winter).

The Advanced Graphene Ceramic Coating for cars is a top tier product for long lasting shine and protection. It delivers an incredible glossy finish while creating a strong hydrophobic layer that repels water, dirt, and contaminants. What really stands out is the durability high quality graphene coatings can last for years with proper care, keeping your paint looking like new.

Used after buffing my black truck. Looks awesome and doesn't have any pesky hazing or anything. Application is simple. Time will tell if it actually works and holds up. I used about 1/4 of the bottle to do my truck. It gives the black and a nice deep shine.

This is legit. Easy to understand instructions and great results. I applied this to my Lexus front badge which was hazy and I topped it off with this Advance Graphene Ceramic Coating and it looked brand new. I avoided spending $580 for a new emblem, oh and it doesnt affect the adaptive cruise control either.

I bought this last year and I used this on my 3rd car which I don't drive very much but the coating has been amazing. I left the car out a bunch in the winter and with some harsh weather, the coating lasted about a year before it needed a refresher. I was able to do my car twice with just the one bottle. In about a year, the water beading effect starts to go away a little so I was just proactive and did a quick clay bar and reapplication. This product is affordable and good that I don't mind having to reapply once a year.

I bought this twice and used it on a new Ram 1500 pickup. The Weiruixin coating is slated to last 2 years according to them. The first time I purchased was back in June 2020. It applied easily and I was real happy with the results. The truck stayed relatively cleaner than without the coating and had great beading. Less than 1 year later (April 2021), I noticed that the beading was not as pronounced and especially with the lower door panels, water wasn't sheeting off as easily. So I bought the same coating again and put it on. It's now March 2022 and again, I'm noticing that the dirt doesn't wash off as easily and has lost much of the beading. Some notes: I bought another brand for the my sister in-law's new X5 and it was a nightmare to put on and take off. Her car has also lost much of the ceramic beading qualities a year later too. So in comparison, this Weiruixin brand is far far better only because it's easy to put on and wipe off despite the longevity issues with both. My brother sent his Tesla to a ceramic professional (and paid a crazy $1500 to do it) and is onto his 2nd year and still has better protection than mine - so maybe you get what you pay for. If I have to do this once a year, I guess it wouldn't bother me so much as it's far better than the prior days of constant waxing. The price on the Weiruixin is good - just the longevity could be better. Another note is the 50ml bottle is bigger than most (which usually are 30ml). For me, I used approx. 45ml to coat my entire Ram 1500 pickup minus the roof. Going to try another brand now and see how that goes.

I'd like to start by saying I've tried 4 different ceramic products and out of those this one was likely the best value and easiest to use. The thing is if you don't follow the directions it's easy to mess things up and then you will spend a long time trying to remove it with something like alcohol which is the only way to really remove this stuff once it's cured but I didn't learn that due to this stuff but rather a competing product which likely was very similar to this I just didn't follow the directions so I think it's safe to say this would likely do the same except with this I followed the directions well so my results were much better. Make sure after you apply that you go back over it all with a microfiber and buff it well before it fully dries and cures this way you even out the coating as well as possibly can that is where I made mistakes I applied the other product and didn't even it out and had high spots all over the place and had to remove everything just about but aside from that it's actually super easy to use these coatings and they work so damn well. I also tried the turtle wax ceramic line both in paste wax form and liquid wax form and whole those products do work well they are harder to apply and don't work as well as these actual coating products. The turtle wax products might be better used as a topper product or something you use on top of these ceramic coatings to boast the hydrophobic nature and make the coatings last longer. That being said I definitely would recommend this product to anyone just know what your getting into and know how to properly install this stuff by watching some videos first. It's important to also clean the car well and remove all wax prior to application.

I’m not a professional, but a hobbiest for 8 years that likes to test products for fun. I do detailing for family and friends for free trying different products out. I tried this stuff on my wife’s new to us white 2023 Mercedes with 14k miles that was garage kept and babied. I did a two step paint correction, since the previous owner liked to keep it clean but clearly wasn’t aware he was adding swirls with every wash, and alcohol wipe down before applying. It was very easy to apply and remove. Did the whole car top to bottom including headlights, taillights and glass. After a three days in the garage, I applied a second coat. First real life wash was a week later and everything looked good. Second wash another week later and it was still ok. Beading was fair. Always used CarPro Reset for washes and foam cannon. After a month of heavy pollen it was time for a wash that would last more than an hour before being layered in pollen again. Every inch of the coating was gone. Not a single part was left anywhere not even the headlights or taillights. Sheeting water like nothing had ever been applied. Not really surprised for the price but I was expecting it to last more than a month. This car is barely driven, sits in the shade all day and had minimal rain in that time. I even use a professional car drying blower, no towels to dry. There was no reason for it to fail that fast. If you’re up for redoing the coating every month then this is for you. It did give good shine those first couple weeks. But I recommend anything else for something that’s long lasting.

はじめは効果テストをしたところ、固まらなかったので不良だと思いましたが。 ５mmほどの厚みでテストしたものはしっかり固まり１か月たつ頃にはしっかりと硬化し、固いナイロンのようになっていました。 ボディーに塗れる量が薄い皮膜程度になるため、恐らく小石などに耐えうるものではないですが、洗車傷くらいならかんわしてくれそうです。

Bought a new car, saw swirl marks getting made, so decided to use this. I am a novice. Looked at all the videos and cleaned the car, after it dried I applied one coat across- I have an suv . Used up half the bottle coating all the windows, panoramic sunroof everything. It protects the shine and dirt comes off easily. Also marks are less, thought it doesn’t protect from anything else, like a bike guy touched my car door with his handle, it has a tiny hold in the paint now. Overall would recommend, doesn’t come off easily and is hydrophobic

Per adesso funziona. Vediamo quanto tempo sarà attivo

Tres bon produit facile a utiliser

Good product for DIY. Did a Red Tesla and it came out well. Patience and process is required in the prep. Didn't have time so gave it a quick wash and dries it and applied the ceramic. Came out well. Approx 3-4hrs for a car. Previously paid AUD$1200- $1500 for ceramic. Tried DiY first time and for $50, you can't go wrong. Comes with applicator pad and buff out cloth. Nothing else required.