Armor AR500 High Gloss Wet Look Concrete Sealer 5 Gallon - Professional Grade Color Enhancing Solvent Based Acrylic Sealer for Exterior Concrete and Pavers - 700 VOC

This product worked exactly as described. I used it on my pool pavers, and the results are absolutely beautiful. The high-gloss “wet look” really brings out the color and gives a professional, finished appearance. I’ve used other sealers before, and this one stands out as one of the best. Application Steps (What worked for me): 1. Clean thoroughly – Start by removing all dirt, debris, and dust. A good sweep and rinse is essential. I used a power washer. 2. Degrease if needed – If there are any stains or oils, use a degreaser so the sealer bonds properly. 3. Let surface fully dry for at least 24 hours - Moisture will interfere with adhesion, so make sure everything is completely dry. 4. Apply in late afternoon – This is key. Avoid direct sun so the product doesn’t flash dry too quickly. 5. Roll on evenly – Use a roller for consistent coverage. Don’t over-apply. 6. Wait 24 hours – Allow proper curing before applying a second coat. 7. Apply a thin second coat – This enhances the gloss and durability. 8. Add anti-skid additive – Highly recommended, especially around pools, to reduce slipperiness. Pros: • Incredible high-gloss, wet-look finish • Makes pavers look vibrant and professionally done • Easy to apply with proper prep Cons: • Strong fumes — this is a solvent-based product, so wear a mask and ensure good ventilation • If drips get into the pool, they can form a floating, semi-solid film Important Pool Tip: If any sealer drips into the pool: • Turn off the pool filter immediately • Use a nylon net to remove the floating material • You can also place a nylon net in the skimmer basket to catch debris • When working near coping/pool edges, use a rag to minimize drips into the water Overall: Absolutely beautiful product. Highly recommend. I’ve done similar projects before, and this one delivered excellent results. With proper prep and application, you’ll get a stunning, high-end finish.

The sealer is a fantastic product for enhancing and protecting surfaces. I used it on my concrete patio, and the results were impressive. The high gloss finish gives a beautiful wet look that really brings out the color and texture of the concrete, making it look brand new. Application was straightforward with a roller, and the sealer dried quickly without any streaks or bubbles. The durability is excellent, providing a long-lasting protective layer that withstands weathering, UV rays, and wear. It also repels water and stains effectively, making maintenance much easier. I highly recommend it for anyone looking to achieve a high gloss finish on concrete, pavers, or other surfaces. It delivers professional-quality results and significantly enhances the appearance and longevity of the treated area.

The AR500 Sealer was used on our nearly 900 sq-ft paver patio. The patio was installed about 10 years ago using Unilock brand pavers. For unknown reasons, the contractor who originally installed the patio did not apply any sealer, which we think adversely contributed to the paver locking sand (used in the cracks between the pavers) breaking down over time. The thought being that the elements (water, freezing, thawing, etc.) had the opportunity to wick down into the compromised locking sand leading to the pavers heaving & the locking sand popping loose. Perhaps had the entire patio been sealed following installation, and repeated periodically over the years (maybe each year), the patio would not be in the condition it was. In the process of determining what to do with the deteriorated patio condition, we obtain quotes from various contractors. As you can imagine with a patio this size the cost to revitalize was extensive. We opted to do the work ourselves with the bulk of the effort coming during the removal of the existing/broken up locking sand. This was accomplished using a multi-tool & a quantity of thin blades, which actually worked quite well but took a long time. The displaced sand had to be vacuumed out of the gaps between pavers with a shop-vac. After removing all the loose & deteriorated locking sand, the patio was thoroughly cleaned, new sand carefully applied and secured in place with a water mist. The last step of a very lengthy & arduous process was to apply a very high quality sealer. We identified Foundation Armor's AR500 brand on Amazon and went with it. The process took 2 coats since the first application was almost immediately absorbed into the pavers & sand. We quickly noticed after applying the 2nd coat that the entire patio came to life. Massive contrast in appearance! We have had several hard rains and initial observation was how the water droplets beaded across the surface. I suppose only time and exposure to the elements will tell how well the AR500 sealer holds up. Our plan is to reapply a coat each year based on the patio's condition. Sure, the product is not cheap but my thought is that "good & cheap rarely get together." I don't mind spending the money for a high quality product, especially after the amount of hard work put on the preparation. This should have been accomplished as part of the patio's initial installation. Hopefully this review is useful to those out there facing a similar situation.