Poolmaster 54507 Spa and Swimming Pool Waterfall Fountain, For Pools with 1.5-Inch Threaded Return Fitting, Medium, Multicolor

Works great. The adjustable pressure relief valve is super important... I didn't want excess back pressure on my pump.

This is a good product. Easy to install with easy adjustments to make the fountain go higher or lower. We have a pool that has little shade, plus south Georgia weather, so this has also helped in maintaining a reasonable temperature and reducing it 1 or 2 degrees as well.My only other comment is to make sure you have the pipes installed correctly with the grommet's included, otherwise the pieces will blow off when the pump is started. I found that just inserting and pushing the pipe all the way in for connection, it causes the grommet to get misaligned and cocked to the side. It will not seat for sure if the case. My solution to that was to put the grommet on the pipe first and then push it into the connecting piece and it worked perfect thereafter.

Whoever designed the compression fitting at the top head needs to go back to school for some basic plumbing education. The threads of the nut bottom out before the compression fitting actually gets tight enough to hold the head securely. And guess what happens if the compression fitting isn't tight?You guessed it, the head blows off. The only way to keep the head on is to lower the pressure to the point that the head only produces a 5 or 6 inch fountain, which is just pathetic. And yes, it was as tight as possible-you can't tighten it any further when the threads are bottomed out or you risk breaking stuff (it's cheap plastic, after all).As nice as these look on the product page, do yourself a favor and save your money. They clearly aren't well designed.

Before purchasing this fountain, I noticed several reviews complaining that it doesn’t fit, but I think many people missed a crucial step in the installation process. To install this fountain properly, you need to remove three parts from your pool’s return jet/eyeball fitting: first, the retainer ring; second, the eyeball itself; and finally, the eyeball “seat.” That last piece—the eyeball seat—can be stubborn. Mine took some effort, and I ended up using a metal “L” bracket from my garage, but you could also use a dedicated pool eyeball removal tool (about $5).Once the seat is out, the male threads on this fountain screw directly into your plumbing. For reference, my pool is an in-ground vinyl with Hayward plumbing, and the installation fit was spot on.The reason I gave this product 4 out of 5 stars instead of a perfect score: Even when all the fountain’s connections were tightened as much as possible, I could still pull part of the assembly apart. If I ran my pump at full pressure, the top of the fountain would blow off the stem, so it’s not quite “set it and forget it.” Otherwise, this fountain works great and adds a nice touch to the pool!Bottom Line:Make sure you fully remove the retainer ring, eyeball, and the (stubborn!) eyeball seat before installing this. With the right prep, installation is easy and fits well on Hayward plumbing—but be careful with high pump pressures

This product appears to be missing an important piece that is not show on the instructions. On part A (spray head) there is a plastic part, like an O-ring which helps to tighten to part C (elbow connector) what appears to be missing is that same plastic ring on part B (Riser) which makes it impossible to tighten the riser to the elbow connector- I was able to have my son hold on to the riser when I turned on the pump and place the spray head under the side of the coping which held it in place. This shouldn’t be an issue and the o-ring should be shown as part of the contents and there needs to be two in order to secure A to B and B to C. What happens is when I turn off the pump the B section comes out and I have to fish it out of the pool. Other than that my grandkids enjoyed it

Arrived on time and in fair to poor packaging. That said, I have been looking at these pool fountains for some time and knew I wanted more than 1 but not at $40 each. I found 2 available as "Open package/Missing parts" directly from Amazon warehouse for $14.99 each, so I purchased 2 for my pool. YES, they were missing parts and NOT in their original packaging but I was able to make 1 perfect unit out of the pieces and with duct tape, another working unit. OMG, they look great. Work perfect and lowered the pool temp 10 degrees. $80 worth of fountains for less than $30 buck's. Very satisfied. Being totally honest, it has transformed our pool area in that I have been sitting at our pool for 30 years and know the sights and sounds like the back of my hand, now sitting out there is like being on vacation somewhere else. The sound of the fountains, the cool spray wisping off the high arc of the water bar. AMAZING....

Works perfect, compliments the pool

We've had this fountain for four years and it's too much trouble keeping it in place. The slightest bump of any kind as well as the hose from our pool vacuum easily knocks it out of alignment. The spray arm also comes out often from the water pressure. We are looking for another fountain. Good concept but poorly designed. We do not recommend it.

Excelente producto funciona y se ve muy bien.

Easy to hook up .. works well .. the end pops off so we had to glue it - other wise it’s a good product

They are a fun addition to our sun day/ pool day. Fit into the jets easily.

funciona como se anuncia sólo es indispensable colocar un adaptador en la salida de agua

Box was bulging...obviously someone returned it but pieces jammed back into original box...some end pieces were put on wrong part...when we tried to attach end to the wall opening found there was no threaded end so no way to attach.......will be returning