Corsair Dual SSD Mounting Bracket (3.5” Internal Drive Bay to 2.5", Easy Installation) Black

This is a well built item, feels solid, and can hold two 2.5" drives. It comes with mounting screws for your drives as well. For this part of the review, imagine the drive you want to mount is sitting on a table horizontally in front of you, one of the broad sides down on the table. If you look at the area where you connect cables, you will notice that connector is either on top (facing upward), or on the bottom (facing downward). It is important to note that the mounted orientation of drives in this bracket is with the pins facing downward in the bracket (otherwise the screws can't align through the bracket into the drive). The main way this can be a challenge is if your power/data cables come into the drive mounting area from above, you may have to put additional stress on your wires bending them to fit, attempt to re-route them through your case so they come in from underneath, or you may have to use a different wire set designed to come in from below. I wish there was a way to allow a more universal mount, so purchasers can mount their drives in the bracket with the pin orientation either (or both) up/up, down/down, or one up/one down. But in the end this bracket does what I needed it to do, which is to mount an SSD in my computer and provides room for an additional drive in the future, if needed. It works as designed, and not everyone will encounter this challenge...so it gets a 5-star from me.

Picked this up because I needed a cheap way to mount a couple of SSDs in an older case, and it worked without any trouble. Installation was straightforward and everything lined up the way it was supposed to. I’ve always trusted Corsair for parts like this, and this bracket didn’t disappoint. Solid enough for what it is and got both drives secured with no issues. Perfect little upgrade for the price.

I used this bracket as part of an upgrade of an older PC. I have the old OCZ Vertex 4 and new Samsung 870 EVO installed in it and the assembly is in my oldie but goodie Chieftec Dragon tower. Perfect fit all around. The only thing I would change about this product is the ridiculous manner in which they package the screws. They put 3 sets of 4 screws (2 sets for the drives and 1 set for mounting the bracket to the PC) in 3 tiny Ziploc-style bags and then they roll each bag up tightly and tape the end over. It's nigh on impossible to find the end of the tape to start pulling it off, so most people, myself included, end up having to cut the things open with scissors or utility blade. There is no reason for packing the screws like this, other than to display their disdain for the consumer. They could simply have tossed the small bags inside the box with the bracket and everyone would be happy. Or, they could simply use one bag for all screws and everyone would still be happy (everyone saves a little money on 2 fewer baggies, for one thing). At the very least, if they insist on rolling these bags up like this, they could fold over the edge of the tape to make a little starter handle with which to pull it off and open the bags, leaving them intact, allowing us to reuse them for other things and keep them out of the landfill. If you need to save space or just want to stack your SSDs for any other reason, you can't go wrong with this Corsair dual bracket, as long as you don't mind having to fight the hardware packaging. I don't know if Corsair was just trying to be different or cute with this, but it cost them 2 stars on the "Easy to install" metric. I still gave it an overall 5 stars, since it's a quality product with perfect fit and does include the necessary hardware.

Nice and simple, and works great as long as your SATA connection is to a cable, and not to a static connector. This isn’t going to work IF you are trying to use it and need to insert your disk into some kind of enclosure where the SATA connector is mounted exactly where the SATA connector in a 3.5” drive sits as this tray puts the SATA connector in the 2.5” drive to far up and to the center so it’s never going to slide into that slot. Getting the screws into the side of the drive is relatively easy on one side. Considerably more difficult in the other side. If you have a magnetic screw driver it’s going to be a lot easier. If you don’t, be prepared for some frustration and a lot of dropped screws … Once I had the SSD mounted it works great on my PC as a SATA cable doesn’t care where the connector on the drive is …

Purchased a new tower desktop computer (no thanks to Microsoft Windows 11 upgrade). Decided to install a SSD instead of the older Hard Drive but, of course, the new system was configured only for Hard Disk drives. This mounting bracket worked perfectly.

Have a few computers and wanted to add additional ssd drives. These do the trick.

Holds the Sdd and easy install.

Exactly as described. Excellent quality.

It is a perfect mount for 2 SSDs. Both Samsung 860 and 850 SSDs were easy to mount and the enclosed screws matched the threads perfectly. There is sufficient room for the connectors and air flow. Definitely use a magnetized screwdriver to screw into the SSD through the bracket. With respect to mounting this bracket, within individual PC cases, your mileage may vary. Worked fine with the bottom holes aligning with the Antec trays on my PC. Delivery absolutely unreliable, because of the postal strike. Wish Amazon gave a choice for other non-postal options.

DELLのスリムデスクトップにSATAのSSDを増設するために購入。 問題無く取り付けできました。 PCの方、DELLじゃなくてマウスとかでもうちょい自由度の高いやつ買えばよかったと後悔してます。

I was pleased with the SSD Mounting Bracket, it did the job which is the most important part. Before I purchased it I requested information from the seller several times... crickets, no response at all. But I did order it and it did eventually arrive, it was a nervous wait.

As you would expect from Corsair, this is a quality product. I was able to quickly and easily mount two SSDs in my desktop PC; one existing one that I swapped out of a single mounting bracket and a new SSD to replace it as my main drive. I've not had any problems since. I would definitely buy this again.

Good fit. Strong and stable frame.