CYA Supply Co. Base IWB Concealed Carry Holster Veteran Owned Made in USA - Fits

Excellent quality material yet strong and rugged while keeping it thin and unnoticeable (which is the point). I love that is has a lock-in position when fully inserted into the holster, you’ll know this by a “click” sound. Drawing the pistol from this holster is a breeze and could end someone’s life within seconds if you did find yourself in immediate life threatening danger of course. Also love that you can adjust the cant of the belt clip to a 90 degree angle to better suit your needs depending on how you want to wear it. Very sturdy and not cheap feeling at all, definitely worth the price in my opinion. It fits my GX2 perfectly so it doesn’t wiggle or move around at all, which is imperative. The clip is very strong and will not pop off by accident or having something or someone accidentally get caught on it. It would rip your belt before the clip snaps which is fantastic. As far as comfort goes, I mean it’s made of a hard plastic poly blend so don’t expect it to be soft like Leather. That said, for what it is and its purpose, it’s phenomenal and exactly what I needed. It’s comfortable enough to wear all day. When wearing it with sidearm holstered with a regular untucked shirt, it’s literally almost impossible to tell I’m strapped which is the idea. Definitely 5 stars on every aspect of it. Just make sure to select the correct size that corresponds with the model of firearm you want it to be in.

This IWB holster for the RUGER LCP MAX is great.... I have a box of holsters that I have bought over the years for many different pistols and mainly carry safari land locking OWB holsters for everyday carry... Before this I decided to try alien gear holster and didn't like it at all.... This holster can be adjusted from fall out easily all the way to the guns locked into the holster and can't be removed that adjustment is up to your liking... I prefer it set so the gun is hard to get out of the holster for security... Even with it set tight it stays attached to the belt nicely... The clip is very nice and also adjustable but it doesn't need it since it stays put without the belt on blue jeans or even pockets although that's not ideal... It fits the pistol great and covers the trigger properly... I have had a lot of holster time in my life and highly recommend it.... Especially for the price... It's very nice and concealment is great... Clips has been perfect...

I am a touch feel before I buy person, especially when it comes to products that have a very specific application. Unfortunately, there are so many makes and models of pistols finding a specific holster in a store is damn near impossible unless you have a popular pistol brand such as Glock, S&W, ect. This exceeded my expectations!! The fit between the pistol and holster is perfect. It is easy to remove the holster with pistol in it to take it out as a single unit when I get home. As well it still clips over the waistband and belt and holds securely enough to draw without the holster coming out your waistband with your pistol still in it (that would be a bad day in an emergency). I feel good about this holster and the security of carrying with it. If adjusted properly (keep it a little looser) you can draw quickly enough and the pistol is still very secure in the holster. The cant on the holster was perfect from the factory for me. I played with it and set it back the way it came. I think if you want a better holster, you're going to have to pay a lot more money. As far as I am concerned the only and I mean only drawback is it's not as comfortable as I would like for a long day of concealment. Make sure you have a tucked in undershirt for maximum comfort. I may consider getting a more comfortable IWB holster for certain situations, but I like this one so much and I don't always carry it (I live on the border of a Nanny State) depending on what I am doing for the day. This holster is easy to tuck in before leaving the house and easy to take off when I walk in the door so I find it very convenient. Or if on a trip and want or need to leave it secured in a vehicle it's easy to take it off and put it in a vehicle compartment. If you're having an issue with this holster as I have seen some people state, it's probably user error. I read through so many reviews before this purchase, and I don't regret it. Great Job in the design and craftmanship, this holster is worth the money and could easily go for more than the price point.

More comfortable than other holsters I’ve worn, quality material, durable. CZ P10S fits well, it won’t fall or slip out and has adjustable retention, but doesn’t click in, only fits in. It’s slim and more concealable than others. Biggest downside is when the sidearm is holstered, it’s tough to get a good full grip on the sidearm to remove it. There’s likely better options but this will do just fine as a budget holster.

Although I don't prefer single-clip style holsters for larger / full-size pistols due to the instability when moving, getting out of a car, etc; for the Shield this holster is seemingly perfect. What I like: The kydex is firm, won't easily compress from belt tension for re-holstering, no sharp edges, the mag-release IS covered, it's a snug fit right out of the plastic and the belt clip has great tension to keep it where you put it. So I can re-holster with one hand safely (ie while holding my shirt with the other hand). The holster is comfortable as far as IWB goes and doesn't chafe. I won't accidentally release a magazine in the car. When I draw, it's always the pistol that releases - not the pistol with the holster still stuck to it like some others. And the belt clip is snug enough that it takes a bit of effort to slide it along my belt, much less to unhook it from the belt. All in all, this is a very nice, all-purpose durable holster that checks all the right boxes for an every-day carry specifically for the Shield's size and weight. It stays put, and has nice weight/structure without being obnoxiously heavy or uncomfortably light - and let's face it, having a single belt clip is great for grab-and-go carry, unlike the more complicated holsters with two attachment points (such as AlienGear). IMHO, this is the kind of holster that will encourage you to carry more often. The only negative might be price-point (for some), but I can't fault CYA for charging a fair price for a product that works, and is well designed - really $40 or so is probably just right for a surprisingly high quality, place-and-go holster.

I recently purchased a hybrid IWB holster for my XDS and was quite unsatisfied with it. The actual holster part was kydex, with a large leather pad behind it for a backing and a clip on either side—that style of IWB holster, whatever the style is called. It was just so big it was only comfortable in the small of the back. In my search for something a bit more comfortable, I found this holster. I was hesitant at first because it was under $40 and usually with holsters you get what you pay for. My previous holsters were double this price, at least, and I was afraid it would be cheaply made and not very sturdy. It’s Amazon and they have a great return policy, so I made the plunge and bought one. I am glad I did, because it is a great holster. The holster itself is barely wider than my gun, going just around the trigger guard on one side and the sites on the other. It’s very thin, so it’s not much thicker than my gun. When wearing it, it is so thin it feels like you have the gun and nothing else tucked inside your pants. It isn’t bulky at all, and leaves minimal printing. I have carried it at all positions and it is one of the most comfortable holsters I have used. I won’t say you can’t tell it’s there because there is no holster out there that is so comfortable you can’t feel it, but it is comfortable enough that you won’t mind that it is there. It does not bother you at all or get in the way of sitting down. Even though it is rather thin, it is not weak or flimsy in any way. It’s not going to break unless something extraordinary happens, and most likely the only way it would break is if the wearer did something stupid and would be at fault for it. One of my favorite parts about this holster is that it actually has a raised portion for the gun’s disassembly lever. That is great attention to detail at the price point. My old holster, and even the one I bought before this one, did not have that and rubbed the lever the whole way in and out, leaving it looking beaten. On this holster that will not happen. It also has plenty of clearance over the sights and magazine release, which is a problem with a lot of other holsters. This one is flawlessly designed, and I can’t think of any improvements I would make. The clip fits my belt perfectly and can also be adjusted from 0°-15°. I think at 15° it is pretty much perfect for carrying at about the three o’clock postition and am satisfied with the adjustability. It comes with a hex wrench to adjust both the clip and the retention. It held my gun extremely tight right out of the box and I had to loosen it a bit, which was entirely a personal preference. This holster will never let your gun fall out, so don’t worry about that. It also gives a satisfying “click” when your gun is in all the way, which is feature I missed in my last holster. This holster is at a cheap price point, but it is not cheaply made and is not lacking in features. I have used holsters double in price that weren’t as good as this one. I am more than satisfied and would recommend it to anyone, whether they are new to IWB carry or have been doing it for years. I myself have been carrying for over a decade and gone through over a dozen holsters, and this is the one I’ll settle on. Fits the XDs like a glove with no wiggle room or design flaws and an amazing attention to detail. You will not be dissatisfied with this holster.

This is a good holster. I’m one of those guys that usually buys 2 or 3 holsters for every gun I own before I find one that I like and use. This holster tightly holds my Glock 26 and it is comfortable to wear. The clip that fits over your belt is strong and latches on your belt securely. I like that the holster has an adjustable cant. I prefer to have the grip of my pistol to be elevated above my belt line. The holster also has an adjustable tension to hold your pistol securely in the holster. There are two adjustment screws and the tension can actually be too tight. My only dislike of the holster is that it came with the tension was set to tight and immediately scratched the trigger guard of my new Glock 26. The surface of the holster that faces your body extends as high as the pistol of the gun does so the gun does not rest on your skin. The holster stays open and is it easy to reinsert the gun back into the holster after it is drawn. The gun securely latches in the holster and with proper adjustment it is held in place and it does not easily come unholstered. Make sure that you set it to your personal setting that you are comfortable with. Mine is set to allow a snap draw and the holster stays attached to my belt. The holster fits nicely and it is reasonably comfortable to wear. You can also wear it with limited printing while wearing a loose fitting T-shirt in the summer. I rated it at 5 stars and I hope my video is helpful for you.

**SEE 2 YEAR UPDATE AT THE BOTTOM** Let me just start by saying that I have been VERY pleased with this M&P Shield IWB Holster from CYA Supply Co. so far. The Shield has been on my "list" for quite a long time now and while I was looking for a decent carry holster, this product came up. After seeing all of the great reviews and seeing the price (under $40), I knew I would have to give this a shot once I got the Shield. Well, I purchased a 9mm Shield a couple weeks ago, so I put the order in for this holster this last Saturday afternoon and I already received it today (Tuesday, 3 days later). The packaging was simple and the holster came with an Allen wrench (looks to be a 3/32") to fit the retention and cant adjustments. The holster itself is very light and appears to be made of a durable plastic (see product description for exact type) that appears very durable yet flexible. I have been wearing it for the last couple of hours with zero irritation on my skin, so I am very excited to begin using it as my EDC. The clip that comes standard will fit a 1 1/2" belt, with a possible belt thickness of 1/4" (my belt is not this thick so I cannot say for certain that it will fit one this thick) I really like how CYA has incorporated the ability to adjust both the retention and cant for this holster, making this a very valuable product to those that have not found a holster to meet your carry style. For those that may not know, the retention adjustment allows you to customize the grip (retention) that the holster places on your M&P Shield as it is holstered to allow for a tighter or looser drawing of the weapon. The cant adjustment allows you to customize the angle that your M&P Shield is placed in your waistband from 0 degrees (barrel pointed straight down for a straight up draw) to 15 degrees (barrel is pointed slightly back and the grip angled forward slightly for an angled draw). Pros: -Cheap price for a great quality holster -Material is light, but also appears durable -A thin holster for a thin gun (measured at about 1 3/4" at the thickest point, including the clip) -Excellent shipping (purchased on Saturday, arrived Tuesday in Colorado) -Comes with adjustment Allen wrench needed for all adjustments -Ability to customize retention, as well as cant angle (from 0-15 degrees) -The fact that it is made in the USA by a veteran-owned company makes this product that much more awesome to me Cons: -This is not really a con, but since the clip is made from plastic and not metal like I have traditionally seen, this may end up being a problem point. It is made from the same material as the rest of the holster, with metal screws, so provided that the holster itself holds up as well as I think it will, then I guess the clip will not be an issue. Just figured I'd mention it for those wondering. Overall, I am highly impressed. From what I have seen so far, I would 100% recommend this to anybody looking for a Shield holster. I will be updating my review after I have carried my M&P Shield in this holster for a while. **UPDATE** 09-Apr-18 (Purchased 25-Jun-16) I have had this holster now for nearly two years and it fits just as well as it did when I first got it. I have not had to tighten or adjust the screws at all since I first got them how I liked them, which is very important for me to not have to worry about anything coming loose while carrying. I have not noticed any wear in the material or finish, although I wear this as my EDC. I have not had any issues with skin irritation from rubbing and sweating, so all in all still very impressed! My ONE big takeaway point is to be sure that you use a quality belt, something with some thickness. I started carrying while wearing a thin (like less than 1/8" nylon webbing) belt, but this would move out of place and once or twice fully slip off. After I bought a 1-1/2" wide (1/4" thick) leather CCW belt from Relentless Tactical, I have not had any issues with this holster moving or coming off. Like a few other reviews I saw before I made the purchase stated, A GOOD GUN BELT IS A MUST, not just for this holster but for all holsters in general. I am still highly recommending this holster for the M&P Shield after 2 Years of use!