SAMODRA Built in Kitchen Sink Soap Dispenser (Brushed Nickel) with 12 oz Large PET Lotion Bottle, Refill from Top

Looks more expensive than it cost. Easy to install. Works very well. easy to refill

This kitchen sink soap dispenser is a great buy. Well made, easy to install and perfectly matches our brushed nickel high end faucet. I feel it is very durable and will last us way longer than the one that came with our faucet. It dispenses a “just right” amount of soap and is just the correct length that if you wanted to use it as a dishwashing soap dispenser would be perfect also.

These soap pumps are working out well so far. They were easy to install and they match the brush nickel finish of the faucets already installed.

We recently replaced our old dish-soap dispenser, one of those with the skinny little tube sticking out of one side of the pump. Two issues with that one were that people tended to push on the skinny little tube instead of on the top of the pump and that tends to wear our the pump parts in short order. Push on the tube a bit harder and it breaks off! The other thing was that I like to refill it from the top rather than twist my 87-year-old body down under the sink to remove the bottle/reservoir. This dispenser has a very small (about 1/4") hole that you must pour the thick dish soap through to do it from the top. It takes a lot of patience to fill the reservoir that way since you have to carefully pour a tiny stream, and when (not if) you go a wee bit too fast the soap covers the opening and immediately backs up to the top and overflows onto the sink. That opening in the new dispenser is bigger and makes it easy to refill from the top. Kudos! So this new one is a bit higher from the sink top to the outlet, too, making it easier to dispense a dab of soap into something you want to wash, plus the pump and the spout are one-piece and way more rigid and secure-feeling than the old one. It also looks a lot better. A suggestion for the manufacturer: Put a little raised, round "button" on the top of the pump so users will kinda know that's where to push. There's still the tendency of some people (my observation) to just push down on the spout. Not good for longevity.

Kinda easy to install n works great

It's extremely durable and worth the money. I have been through three previous ones and this is the best quality I have gotten.

UPDATE: I was so bugged by the big black washer gasket that I decided to go against the instructions, or what appeared to be the instructions, and install the big black washer gasket on the underside of the sink, instead of between the sink and the dispenser. The reason I decided to do this is because I found a photo of a similar product that clearly shows the big washer under the sink (I've included the photo). The written instructions say to leave the washer on the threaded flange, but that's a bit confusing, because there's actually two washers: the big black one, and one that is nestled into the base of the dispenser. The picture diagram kind of shows two washers (one above, and one below), but doesn't have any written text acknowledging that there are two washers and how they should be arranged. I'm so glad that I decided to rearrange my installation, because it is soo much better. It's better fitting, making for a much tighter installation, and it looks so much better, providing the clean and sleek appearance that I wanted. So, for anyone getting this, just know that there should be two washers - one thin one that stays with the base, and one really thick one that installs under the sink with the nut. I originally gave 4 starts, but now that the installation matches the listing photos, I'm updating the review to 5 stars. ORIGINAL REVIEW: I wasn’t too happy with the fact that the dispenser has to sit on top of a big huge rubber washer in order to tighten down. I tried just using the washer gasket that was already built in to the dispenser head itself, but that didn’t work because the threaded section under the sink that the nut tightens onto wasn’t long enough, making it so the nut stopped at the end of the threading before it was tightened. So the big black washer had to be on there to make it so the nut will tighten down. I thought about installing the washer under the sink instead, but I fear having the softer rubber against the tightening nut will make it so it doesn’t seat firmly enough to keep water from seeping underneath the dispenser, and that also is not what the instructions say to do. NONE of the listing photos show this big black washer sitting on top of the sink. All that being said, I like this dispenser enough to only deduct one star from my review. The entire reason I bought it is because I just installed a new Kohler faucet and soap dispenser combo, and the soap dispenser quit working after a few weeks. I wanted a replacement while I try to navigate the Kohler lifetime warranty. My other option being to remove the faucet and return the entire set to Home Depot and get a full replacement. That’s much more time and energy than I have, so I decided to go with this dispenser as a hold-me-over. I personally like the looks and the function of this dispenser better than the Kohler one. The only downside is that dang washer. It doesn’t provide the sleek and clean appearance I was hoping for, but not a big enough deal breaker to send it back. PS… my sink has a bit of staining from the original faucet that was installed. That’s not dirt lol

I should have paid closer attention to the product specifications - specifically, the one for the volume/capacity of the plastic reservoir bottle. This unit's soap reservoir bottle holds 12 ounces - which may be plenty for some but not for me. I do a lot of dishes by hand and am looking to replace the current under-sink soap dispenser I now have which is beginning to malfunction. My current unit has a MUCH larger soap reservoir bottle (see photo - the reservoir for my current soap dispenser is the white plastic bottle on right in photo). The reservoir for my current soap dispenser is taller and wider, and it appears to hold about 50% more soap. Even with that larger bottle, I find myself having to refill it more often than I'd like so the smaller bottle for this dispenser simply won't work for me. Otherwise, I like the look and finish of this product. Once I realized the bottle was too small for my needs, I packaged everything back up carefully (never installed) and returned the item to Amazon.

Used this instead of blank cover when fitting new black sink in kitchen. Nice to use and smart fit. Not easy to refil by pulling the top off as suggested in description. The mechanism stays put inside. I refil by unscrewing underneath and screwing back in - this is easier than you might expect, as long as the holding screw done up tightly, the bottle will unscrew easily.

Sieht super aus und funktioniert perfekt schnelle Lieferung

got this to replace a broken soap dispenser and it was easy to install and it works what more can you ask for

Very cheap material not worth it to buy for $50.72 …….feels like scammed

Calidad precio perfecto