Sensor Covers for Libre 2/3/Plus, 55 Pack Waterproof Adhesive Patches,Transparent Tape Long Lasting-Without Hole-HECHUAN

I use these no holes to cover my Medtronic Guardian sensor 4. The tape that comes with them requires2 as the rules me they didn’t stick well. If I showered with in 6 hours of a new one, it would come off in 12 hours. I have been buying these for 3 years. My last order of the exact same seemed all well til I purchased a new order in Jan 2025 but I didn’t start using them until last month. They are not the same as I previously got 2 other times. They feel the same One thing I have noticed and I see it in the review photos is when the adhesive side is not stuck and looks milky white. IF while placing this on and then going to remove the paper from the sticky side, the patch lifts up or you try and nudge it a bit, even a 1/4 inch, the part that was on and you moved, gives NO second chances. B4 putting it on, I fold back the blue scalloped edges so it removes from the middle out to the edges easily. Again if the edge stuck and got moved when you peel the paper off, it’s as good as XYZV! And will either need to be replaced then or add another on top of the milky edge.Butnthere’s a big problem, these new ones do not stick well at all. First Q rolled off on day 3, next one 4 days and I added extra tape on top but it didn’t stick. The last one had been on for 3 days but the edges were lifting. I went out to do yard work in the NH heat and half was no longer stuck on. This was placed on the side of my thigh and covered but my shorts. This never happened with this product before so I don’t know what has c Hagen but I will purchase these again nor will I be recommending them to other uses.

These used to be great, and would hold for the entire 15 days of CGM life. Hell, their behavior indicated they could have lasted at least another 15 days. However, the product I received with this July 3, 2023 order was very much inferior. After about 5 days, the edges of the patch would not adhere, and it just got worse as time went on. Yes, with the original product, I had to use the Goo-Gone product to remove all adhesive from my skin, but that was much better than having to endure the patch not remaining in place for the full life of the CGM.

Good adhesion, waterproofing works. Relatively easy to apply but some body locations make aligning it difficult. No pain during removal but it did leave behind adhesive that had to be cleaned off. The edges began to peel almost immediately, and over time as it rubbed against my body and clothing one side peeled more and more. I had to replace it after 8 days, but that's okay for the price. The second one lasted until the CGM sensor stopped working, but it was also peeling. In my batch, the paper backing was only scored on one side, so I had to tear it off on the other to have two places to hold during application. Unfortunately I had a serious skin reaction. After a few days I noticed a raised rash, but only around parts of the edge. It slowly got worse and moved towards the center, but didn't seem serious enough to remove at that point. I went ahead and applied another one when the first one came off. When I removed the patch and sensor, the rash covered the entire area where the patch touched and was very red. The area under the sensor had also become swollen, red, and blistered, and I went to urgent care. I used a prescription steroid cream for 10 days to reduce the rash, and they thought the swelling was also part of the reaction. My PCP later said the needle and cannula may have hit a nerve cluster or blood vessel, and having the reaction to the patch may have made that problem worse. I had no problem with my next two sensors. I applied a patch to my abdomen to test, and again after a few days it was starting to cause a reaction but only around the edges. If you have any history of contact dermatitis you may want to pass on these. I switched to using Tegaderm, which is used for wound care, in a big roll that can be cut to the needed size, and it has been working without issue. I use a bit of gauze over the sensor to prevent the Tegaderm sticking. Precut bandage styles are also available.

Wow -- overall excellent value and helps protect your Freestyle Libre 2!. Keeps your sensor device in place so you can actually get continuous glucose monitoring! Waterproof -- yes, very much so unless the edges get rubbed for whatever reason and avoid underwater if any edges have curled up from working out, rolling in sleep, bumping it, scratching at it inadvertently. If the seal around the edges is perfectly applied you could get a half hour bath. Stays after ten minute showers. Transparent -- yes, very much so! Adhesive very strong so avoid hairy areas. If you're expecting a single order to last the year, that may not be the case. We have to switch out adhesive bandages sometimes twice a day definitely twice a week. Not quite sure what to use to help remove the leftover stickiness because skin underneath get a little red from the adhesive glue. Overall happy, --this was the second solution we tried to keep being active while keeping a continuous monitoring system in place to evaluate glucose. Able to continue showers and baths as usual. Instructions are a little hard to read the font size. Maybe add a link in the product listing to instructions? There was one issue that was a little bothersome - product wise: the package was not factory sealed and the number count of adhesive coverings were off by about 10% from than the advertised quantity. Tried to get this issue taken care of via website and the item can't be returned and there's no way to get the missing quantity replaced . Tried to mention this to customer service through the online website and was not able to get it remedied. The usefulness of the product really outweighs the incorrect count you may receive. And while the individual adhesive bandages have a protective plastic on both sides of the bandage the outside seal of the package comes opened and the count was off. But the thing is that kind of keeps you wondering was it used before and returned? Because of the plastic backing on both sides of the adhesive bandage there's really no easy way to remove a backing and reapply it perfectly back to a factory state. With the COVID pandemic you kind of want items you purchase for your health factory sealed you know? And some sort of easy method to facilitate removal without creating redness or raw skin irritation. . Active folk may have to keep reapplying new adhesive bandages approx every 36 hours onto the same sticky areas while gently holding the sensor (cause it's a tender area from the micro needle) so the sensor doesn't get pulled off when you remove the adhesive bandage. The CGM sensor manufacturer should really supply a pack of these coverings with each sensor or at least provide some to evaluate so you can avoid having to wait for replacement sensors when they fall out or prematurely fail do to lack of having a protective adhesive covering bandage like this product. Sensors are doomed to fail prematurely without a covering and this one overall does the job.

This products work excellent as described. I am so glad that I purchased this product as my sensors kept falling off after washing up or after a few days. This product really does help the sensor to stay on for the full length of time for the sensor… usually 15 days. The waterproof really does work and help. I recommend this product for someone that is looking for good support for their sensor to stay on you for the length of time for sensor without falling off even taking shower or washing up.

So you've slapped on your Libre sensor and suddenly feel like you're starring in a sci-fi movie—minus the dramatic soundtrack and special effects. But then reality hits: life is messy, water is wet, and doorframes have a personal vendetta against you. Enter the HECHUAN Sensor Covers, the unsung heroes your sensor never knew it needed. Unpacking the 55-pack was like discovering a stash of transparent stickers that promise to make adulting just a tad easier. These patches are so clear, they make glass feel insecure. Waterproof? Let's just say I performed an interpretive dance in the rain that would've made Mother Nature applaud. The patch didn't budge, though my dignity might have. Applying the cover was smoother than my last attempt at small talk. No holes, no awkward fumbling—just peel, stick, and suddenly your sensor is protected better than my excuses when caught raiding the fridge at midnight. These patches stick around longer than that one Netflix series you swore you'd stop binge-watching. I went about my day—showered, exercised (read: chased my dog who stole my sock), and even attempted yoga. The cover stayed put, silently judging my downward dog. In conclusion, if you want to shield your Libre sensor from water, sweat, and the occasional run-in with everyday chaos, these HECHUAN sensor covers are your new best friend. They're the invisible force field you didn't know you needed but now can't live without. ⭐️⭐️⭐️⭐️⭐️ Five stars. My sensor is safe, and I can continue my clumsy adventures worry-free.

This is a great product and price. I use these when I shower and they are just what I needed. Easy to apply and keeps my patch dry.

They are very sticky buy it will not last long. We cut just a piece off the edge and it made it flatter without those raised lines.