rog bezel-free kit abf01 universal multi-monitor setup with optical micro-structures easy assembly (set of 2) , clear

A piece of cheap plastic designed a decade ago for monitors that are a decade or two old tech. The principal is great but those plastic pieces are of poor quality and have design issue. The kit assumes the monitors bezels are around 10mm so when you place the units on the screens it converge the displays 1CM from right and 1 CM from left. So what happens if your monitors have bezels that are only 6mm? 8mm will be erased from the display There is no fix for that unless you take the screens apart by around 12mm. I did that and yes, everything aligned well. So they are in 2025 selling a junk piece of plastic designed for monitors of two decades back. Instead of having multiple versions for each bezel size they just have one product. Worse then that they do not mention anything and there are no documentation. So, buy those if you have monitors with bezels of 1.1cm in each side. Or expect weared behavior. One more aspect is the quality. Very poor plastic. We are in 2025 and we know the material used in screens like phones how hard such glass to scratch. Those junk scratch it you touch them with your nail. Mine had minor scratches directly from the box. So paying $120 for junk is not recommended.

Quality product and fast delivery

Funciona en lo que cabe bien pero solicita que el ángulo de los monitores quede algo cerrado, da su función, pero si se pasan con dar tan caro 2 trozos de plástico

It not perfect, but it’s a lot better than two 1/2” black bars in the view. With 32” curve screens it took a while to get it right. On my other rig with 25” screens put them on, a little bit of adjustments under five minutes bingo. Wish I didn’t wait so long to get them.

they do work on curved monitors and you can get them to flawlessly mesh two screens together but the stock brackets are not that strong for holding the glass in place so i 3d printed clips to force them to grab the glass tighter and to get it to show no lines in the middle when using this only worked flawlessly because i 3d printed a monitor support for the bottom and back of the monitors to hold them perfectly together at the correct angle so i basically paid a hundred dollars for the glass lol which to me was worth it because the end result is what i wanted but if i didn't have a 3d printer for supports i would've returned them because its a pain trying to install it and get monitors to be perfectly together so splitting and warping effects don't show from them not being perfectly together and its probably my ocd talking about that but yeah, if you have a 3d printer the effect can be perfect for use on curved monitors that is but they do say that they’re made to be used on flat monitors so maybe that way they’re a-lot easier🤓🤘

Das Bezel mit macht genau was es soll. Selbst mit 32“ Monitoren funktionieren sie. Einfach zusätzlich eine Art Verlängerung aus dem 3D Druck zaubern und fertig. Selbst ohne den 3D Druck und nur die Streifen mit Klebeband an den Monitor befestigt - hält auch und tut seinen Zweck Preis etwas frech