Pacific Doorware Storefront Door Mortise Lock Hook Deadbolt & Cylinder Combo Adams Rite Cam in Aluminum (1-1/8" Backset)

I just ordered this lock however Im not sure if it is suitable for a 2" wide door. Also if you fit this in an hollow type Aluminum door will require mounting clips that fasten to the inside of the door that hold the lock body ? If so are they included? UPDATE: Lock arrived with no instructions or template. Tools required to install in a METAL DOOR are as follows: Grinder, metal grinding blade, Drill, multiple metal drill bits, metal file, metal hole cutting drill bit, multiple screw drivers, small level and a ton of patience. Without instructions or a template it is extremely difficult to figure out where to cut the holes for the lock cylinders and the hole for the hook lock. There is no room for error or the door is finished. This is a job for a professional that has done this before and knows what to do. As mentioned you need mounting clips for the lock body they dont come with the product. The lock itself was good functionally everything worked. My installation was in a 2 x 2 hollow aluminum tube for a sliding gate. Realizing it was beyond my skill set I hired a pro for $200 dollars and Im glad I did otherwise it would have been a complete disaster. youtube videos helped however when its your door and you are working in real time things can go sideways fast. HIRE A PRO!

Great product and easy install

I bought this on behalf of a store that was broken into as it was able to arrive the same day, and it works, however the lock cylinder that comes with this lockset is extremely cheaply made and has no security pins. It has very loose tolerances when compared to other lock cores that are available, which means this lock can be picked or bumped extremely easily. I ended up reusing the old cylinder from the broken lock this was replacing. The rest of this lockset is well made and the bolt is heavier than the original Adams Rite lock that it replaced. The finish matched exactly and the install is very easy. Please note that the key that comes with this lockset uses Kwikset depths cut onto a Schlage style key. This could be problematic if wishing to key other locks to the same key as this lock.

great lock . the key when you install this unit is not to force the lock when you spinning into lock cylinder. for outside use the key to help you turn the lock. and dont force it. once you force and you strip the lock frame it wont never sit propley in frame and most likley ruined. other then that it works perfect. i installed the entire lock in 5 minutes because i done so many times. for people that havent done this avg time i would say it 25 minutes.

The screws that hold the lockset in the door were too long. I had to cut about half an inch off of the screws. After the screws were cut it was easy to install and it works perfectly.