Sioux Chief 4" Push-Tite Cist Flange (PBS44AZ)

I watched about a million (ok not a million but seemed like it) videos on replacing the floor flange on my old failing metal flange that was rusted / corroded and leaking noticeable gasses from the drain. I settled on this one and it worked perfectly and is 100% stronger and solid than the old metal one. It fit snugly in the 4” drain and fit flush after shimming it a bit to get the floor height correct. It doesn’t come with screws but I had ones that worked great I used all 8 into the subfloor. The toilet is now solid as a rock, as in no more rocking at all. A standard height wax ring was all that was needed to reset the toilet and all is good. I’d use this product again for any future toilet repairs.

This item made it really easy to install out new toilets. Highly recommend!

Worked great for my ~3.75” cast iron drain pipe.

I think this is a great product and definitely served my needs at a very good price. However, its description is misleading (thus, only 4 Stars). The way it described, you would think it is very long, almost 7 inches. However, it is only about 4 inches long so be aware of this. It easily fit into a 4 inch sewer pipe but was also very snug after pressed in. I used a generous amount of silicone caulking on the red rings. Maybe not necessary and overkill, but it is very firmly in place and I believe it will last for a few decades.

This product is the best thing ever .have had problem many other products that never kept the sewer smell out of the bath room .But this product is a great idea that works for older home with cast iron pipes,its slides inside of your older pipe and stops all.the smells ,wish I had this a few years ago

My toilet drain was too far below the subfloor for a typical closet flange to reach it and this one did the trick. It’s slightly longer and because it inserts INSIDE the drain pipe, it worked beautifully for my remodel situation.

I have replaced 3 toilets in my house with only one of them having the flange in good enough shape to reuse. The other 2 I had to remove the flange and I have 4in Xheavy Cast Iron all throughout my house. This Sioux Chief push tite flange worked so much better than the Oatey Twist N Set. Just clean the inside of the pipe with a wire brush and you’ll get a nice seal with the Sioux Chief that you won’t have to break your back installing like the Twist N Set.

Exactly what I needed to get a new flange at the perfect height above a new click-lock floor overlaying old linoleum and pushed right into the old “lead bend”. So much prefer this as opposed to working with lead or paying someone to do so.