Ridder Vario 505010-350 Angled Wall Bracket for 25 mm Shower Bar

This worked perfect for my angled shower. I waited awhile to purchase as it is very expensive but it worked like a dream to hand the shower rod. It was easy to install and works great.

It's really hard to capture in photos, but I have a weird set-up with a 30 degree wall. This angled adaptor was truly a fantastic solution and works great. I purchased the recommended curtain rod and together they hold up a shower curtain and a heavy-duty plastic liner. No issues with slipping, it fits tight and easily took care of the problem. Highly recommend!

1. Ridder Vario Shower Rod Angled Wall Mount / Adapter(photos) This wall mount is amazing! I bought a wall mount and a rod from the same brand because I was unsure if rods of another brand would match with the wall mount. It turned out to work working perfectly. The angled wall mount can be inserted inside of one end of the rod just fine. I originally tried to put it into the wrong end first (~0.87”). It just can be pushed into the rod a bit; on the other end of the rod the wall mount fit in properly (~0.98”). I think I could’ve made it fit in the smaller end by shaving the edges of the that fits inside the rod a little bit with a utility knife; but, I didn’t need to do this because our bathroom had only one sloping wall.

Easy to install, perfect for a sloped ceiling as you can see. The thickness is what I expected and the value was perfect. Did take a little to receive but was okay with since we just bought the house.

Only thing i dislike is the price but I’m happy with the results. Only comes with one which was fine because i bought a tension rod so i didn’t need one for the other end since i had a flat surface on the other side. Had it up for a month now and it’s very sturdy

This was the perfect solution for our angled ceiling. One thing I will mention that I didn't think of is that there will be a gap between the wall and curtain. For me it wasn't a lot so not a big deal. Also, I didn't originally purchase a shower rod because I thought it wouldn't be hard to find one but after looking at a few I went back to Amazon and bought the one mentioned in another's review, I think it's All Zone? But just check the other reviews.

Well, this is sold at 5x price of what it really is worth, $2? $4? The bubble pack probably costs more than the product! It's basically a ball-joint of good design and well moulded. It does the job for some angle installations but it is NOT universal. In my case, I have a curved shower curtain rail 64" long spanning parallel walls but offset ends. I had to chop the larger of my telescopic tubular rail end and glue the piece onto the lesser diameter end, to adapt to the joint adapter. Then I had to drill and insert steel locking pins (I chose 3/16" 304 stainless rod, which I had on hand) through the entire diameter of the ball/socket joints, to carry the outside load of the curved rail and curtains and prevent torsion sag at the joints. It works, but the load on the plastic ball joints is pushing things, and might be taken to the limit if I or Wife get enthusiastic with curtain action one time! But without this product, the solution would be a total one off and even harder to accomplish. OK, I worked out the solution above, and it's been good for more than 6-months, but what I had to do is a bit more than the average home owner might be willing to tackle, without above average DIY skills. Doubtless the product works easily and reliably in an application along the simpler lines of the ones advertised (parallel walls, axially symetrical ends). So I recommend it with the proviso of limited applicability (due diligence required) and high price. There is a HOLE IN THE MARKET for an adaptable ball joint kit - which might be worth more than $20. This thing fills a narrow need in the absence of competition, in an admittedly limited market niche. If you're a DIY adventurer, like me, it can solve more complex angle mount problems.

This product is exactly what we needed! I searched all over the internet for a solution to our angled shower wall and I was surprised to find this piece was the only low-cost solution I could find. I can’t believe these aren’t sold in home improvement stores! I decided it was with trying out and once received, the old shower curtain we had was too small on one end and too large on the other to fit. My husband did some finagling and was able to get the larger end to fit snugly. It was super easy to install too and finally allows us to use this shower. $20 does seem a little steep, but compared to other options out there like putting in glass doors, this was a steal!

Si integra nel bastone Ridder 551010-350 e svolge egregiamente la propria funzione. Unico neo: lo snodo va inserito nel tubo con diametro da 25 al posto del terminale con la molla retrattile per cui si perde la possibilità di utilizzare questa funzione. Il bastone pertanto va incastrato a pressione tra le pareti (sarebbe stato meglio poterlo inserire nel tubo con diametro inferiore e sfruttare la molla).

Se ajusta de maravilla a techos abuhardillados

The only product that I could find to fasten a shower curtain rod to a sloped ceiling. Was easy to install, works well so far. Price seems ridiculous for what you get but alternative solutions would have been more difficult to implement and costlier in the long run. Am I glad I bought it? Yes.

In der neuen Wohnung stand ich vor dem Problem, dass die fest installierte klappbare Duschwand schon sehr in die Jahre gekommen war. Ich entfernte diese und aufgrund des Dachgeschosses war eine 0815-Vorhangstange leider unbrauchbar. Mit diesem Adapter löste sich das Problem sehr unkompliziert. Montage ist selbst für Laien möglich (1 Schraube) und die Halterung verrichtet jetzt schon seit 2 Jahren absolut zuverlässig ihren Dienst 😉

Very easy to install, best thing I bought for a small shower room.