QualGear PRB-717-Wht Ceiling Mount Projector Accessory

Ordered one day, got it the next. Very, very good quality metal and assembly, better than I expected for the price. Had read other people who had bought this mount say that it didn't come with the screws to fit their projector and it was hard to figure out. The mounting to the projector was a little interesting at first but looking at some pictures on line and letting my imagination work, it wasn't bad. Reading about the screws and such, i had already stopped by the home improvement store and bought extra screws and washers for "just in case". ended up using the shorter screws and a few washers that I had bought instead of the ones that came with the until. Quality of the bolts, nuts, washers that the mount is built with is good, but the tools they provide aren't very good. The Allen wrench is OK, but the box wrench is near worthless, have a 10mm box end wrench handy for the adjustments. Mounting to the ceiling was easy enough. Finding the correct place for mounting is harder than the mounting itself. My projector is light weight and the mount doesn't weigh much so I had plenty of room to play, and was lucky enough to come near a ceiling stud, so adapted my measurements to use that stud for two bolts. I did use shorter lag bolt than the ones furnished, made the job easier. I think I spent about $3 on extra materials (bolts, screws, washers). Mount looks nice up on the ceiling even though it doesn't have the fancy covers some of the more expensive mounts have. If your projector weighs less than 25-30 pounds, there's no reason, so I thought, to spend more money. My ceiling is 11' and not vaulted, my projector weighs just over 6 lb.

I just installed this into a BenQ W770ST. It works great. I feel like this mount is good quality and fairly heavy duty. It didn't bend in weird ways or anything like that. It is pretty solid! My projector has three mount holes, so i had to play with it a little bit to get the attachment arms right, but once I did it is solid as a rock. Also the little spacers you need that go between the projector and the arms are kind of weird. Don't overtighten them. I broke one, but luckily because it came with 4 and i only needed 3, i had an extra. The ceiling mount portion worked well and was really simple to install. The screws are huge (which is great), so make sure you have a fully charged and powerful drill to drive them into the ceiling joists. The hardest part of the install by far for me was finding the ceiling joist. My stud finder wasn't working, so i tried to measure from where my joists are exposed in the laundry room and translate those measurements to the living room. I was about 3 inches off, so i drilled 3 test holes before i found the joist. It's nothing that a little drywall mud and touchup paint won't fix though, so not a big deal.

A sturdy ceiling mount that gets the job done. I purchased this one above all others I looked at because of the amount of adjustments available, the color, and the price. It was fairly easy to assemble and the kit comes with many different screws and washers to fit your exact projector. Mine is a BenQ W1070 and I did need to stack up a few washers to get the screws to sit tightly to my projector, but it is very sturdy. The biggest drawback is that the ceiling mount piece only screws in to a joist in one direction. You'd better hope your ceiling joists run parallel to your screen if you want to take advantage of the full features of this mount. My joists are perpendicular, so some of the finer adjustments that this mount is capable of simply won't work, because the mount is technically facing a side wall (not the screen). Another downside is the height is not adjustable. I have a lowered ceiling beam running right along the area of the projector. I would have liked to lower the projector by 1-2 inches so the projector could have been located closer to the beam while still allowing room for HDMI and power cables. Instead, I had to move the projector closer to the wall, restricting my maximum screen size. All in all, I am happy with the mount because it is installed, calibrated, and it is holding my projector. I'm not going to take it down after all the effort of installing it to return it. But, if I had known that I would have liked to have more control over the exact projector placement, I probably would have looked for a model that had an adjustable height and some kind of swiveling base. If you are just looking for an adaptable (yet basic) ceiling mount, than this one offers more options than many basic models.

I liked that this project mount which came with a lot of hardware including extension arms to facilitate the installation of a wide range of projectors. For example, I used all the extension arms for me Epson projector. This mount is truly a universal one. I also like this mount because this mount provides great versatility of ways to adjust the position/posture of the mounted projector, e.g., tiling/rotating/shifting, etc. Last but not the least, the price is very fair. Overall I am very pleased with the unit as it worked perfectly and the installation is solid. Hopefully this will last for a long (the material seems to be quite durable)

Très satisfait. Kit reçu rapidement, bien emballé et produit pas trop haut pour une maison avec un plafond assez bas. Prix très intéressant pour ce kit qui parait très solide. Les possibilités de réglages Vesa sont énormes et les réglages (dans tout les sens), le kit est archi complet avec les outils, toutes les vis, rondelles, entretoises et plusieurs bras de fixation.

A number of nice features: - Lots of supporting hardware. Spacers and machine screws to connect to a variety of different projectors come in the box, as well as screw and screw inserts for mounting either to studs or to other surfaces. - Mounting arms have sufficient adjustabillity such that I was able to find a configuration that worked with my oddball Epson projector, which is only supposed to be compatible with special 3-point mounting plates. - A thorough installation manual (which helps! installation is fiddly). - Cleverly constructed to provide lots of angle adjustability. - Once you've hooked up your projector and dialed all the angle adjustment just so, you can still detach the projector from the main mount assembly without disturbing those adjustment choices. - Seems sturdy enough. - Pretty cheap.

Good product. Best fit for my requirement.

Nutze die Halterung für meinen Epson TW7000 und der hällt jetzt schon über ein Jahr sehr gut!

Great quality mount that has good options for positioning my projector, and an excellent price. Only issue was that the two main pieces were difficult to connect once the base was screwed into the wall.