6Pcs On Off Door Switch for Closet Light Black Normally When Opens Cabinet Electrical Lamp Switches for Closet Pantry Cabinet Door lkelyonewy

Works great and comes with all the screws to mount the switches

Good for the cost. Used on low voltage cabinet lighting. Used 12 overall. Tightening the wire is a bit tricky. Overall pleased.

used 2 so far and they worked great. The spring is strong but the switch activates with very little stroke so keep it set back from the door etc.

Work well with our kitchen pantry. A little flimsy for my thinking but works well.

I used these inside and armoire to trigger some LED lighting when opened. Worked like a charm. I am going to use the excess ones to pantry lighting. Simple to install and the button doesn't have a lot of resistance so it shouldn't require pushing much on the door to close it. TIPS. Dry fit or hold the switch in place to test and see how it will 'hit' the closing door. If you mount it on shelf, try to mount it on the underside so it won't get in the way of using the shelf and you can hide the wires better. Try to solder the wire you insert in the back of this switch. You will need a small, jeweler's type Philips screwdriver for the wire terminals. I used 22AWG wire with my project and it worked well. Good Luck

Love this! Installed on my cabinets with 12v light system

I needed a switch to mount in line with the closet lights, so they turned on when the door opened. This model of switch worked perfectly. The stem has a fairly long throw but disengages immediately so there wasn't any fiddling with the depth of mount to make sure it works. If the switch is compressed by as little as 1/16th of an inch, it opens the circuit. Perfect for my needs and I'm glad I have extras to add to my electrical supplies box.

I needed a small switch to put a light in a cabinet. This worked pretty well. Molly was OK and sometimes when the door was open, the light switch would be stuck, but it seems to get better after time.

Good quality

Installation et branchement des fils facile. Par contre, pour les petits fil (18 - 18 awg), j'ai dû plier la partie dénudée et l'étamer (souder) . Ils étaient un petit peu plus gros que je pensais mais ça ne nuit pas poir ce que j'avais à faire. Malgré les petits inconvénients, je suis satisfait de cet achat et ne mérite pas une note plus basse.

muy facil de instalar. muy buenos.

Muy fácil de instalar, sirven perfectamente.

Includes screws and caps. Nice. Screw holds wires tightly. Circuit opens at about 15% closure which is great. No issues at all.