Office Chair Wheels Replacement, Transparent 3 Inch Heavy-Duty Computer Gaming Desk Rubber Casters,Smooth & Silence Gliding for All Floors Including Hardwood Carpet, Set of 5

I got these for a chair that is partly on hardwood floor and partly on an oval jute throw rug. I'm 6' tall and 215 lbs. The rollers roll smoothly and easily over the floor. If one is going to make the transition from floor to rug I have to get out of the chair because with my body weight it just won't roll up onto the rug. Once out of the chair however I can roll it wherever I want. I can however scoot back from the desk with one or two wheels on the rug and there are no issues. It just seems to be when making the transition but that's of no issue. The rubber on the wheels is soft but durable and doesn't leave marks on the floor. They spin freely and roll easily. They are also much quieter than the ones that came with the chair. They were easy to install. I just flipped the chair over, pulled out the old casters and pushed these in. I don't know why chairs don't just come with these, they're a far better design. They are a perfect fit as an OEM replacement.

Easy to install. No issues after many years. Chair is so smooth rolling, I can give it an accidental bump and it rolls 3 feet away! Noise is reduced and cat hair does not clog up the bearings like it did with the cheap casters I replaced.

These "casters" work well, maybe a little too well. They are merely rollerblade wheels: Tall, rubber, silent, low static friction, low kinetic friction. A slight push in any direction and the chair will begin to coast. On hardwood, you will need to put your feet down to brake because it won't stop on its own. They are that good. My old casters were the standard dual-sided plastic kind that seize up within days of purchase, never to spin freely again, slowly scratching grooves into the hardwood floor. Normally rollerblade wheels and bearings are designed for outdoor use, miles of travel across rough asphalt/concrete, so these are overkill for a smooth, level indoor surface. If you push off from one end of a warehouse, I'm sure you could make it all the way across. Consider this a warning: if you accidentally give your chair a bump when standing up, it _will_ glide away from you. Haven't tested it on carpet, but I'd imagine that could slow it down. So look back and verify the chair is still there before sitting down. And if the intended chair occupant is a bit ... "sporty" e.g. children, maturity-challenged adult, this might increase the level of horseplay. Note that they sit about 3/4 inch taller than the stock casters, so consider that your chair's new minimum seat height will increase by that much. One upside is it makes it easier to roll over small obstacles like bumps or cords. As the description calls out, these are US universal 11x22mm which do not work for chairs like IKEA Millberget which uses 10x20mm. Search for rollerblade casters specific to IKEA chairs if you have one. But now that we're on the subject, if you happened to have the Millberget you could hypothetically use a drill bit (an old 8mm masonry bit with random paint flecks could even work) and bore out the plastic caster housing by 1mm on all sides and jam these in there. Hypothetically. A smart person would buy the right size in the first place though.

Great quality, easy to install. But beware, on smooth surfaces, it is hard to stop rolling! Actually, this is a selling point as it shows how smooth the bearings are in these little wonders.

These can be quite dangerous. I installed them on my chair, and damn near rolled straight out of my classroom. They're sturdy, smooth, easy to install, and best of all, quiet. PS: if anyone is planning on entering a soap-box derby sponsored by an energy drink company famous for crimson cattle...this might be an option for the wheels...

Great quality and smooth to move around on!

The COZYEHOO Office Chair 3 Inch Heavy-Duty Replacement Wheels are, in their unassuming practicality, a revelation of design and purpose. Each wheel rolls with an ease and certainty that transforms the ordinary act of chair movement into something almost exhilarating, a quiet triumph over friction and wear. They attach with simplicity yet remain steadfast, supporting both weight and motion with a reliability that inspires confidence in the otherwise mundane mechanisms of office life. There is a subtle elegance in their balance of strength and flexibility, a testament to thoughtful engineering. I award five stars, for these wheels deliver on every promise: they restore mobility, preserve stability, and enhance the daily experience of work. In their functionality, one perceives a miniature drama of problem and solution, a narrative of ease triumphing over impediment. The COZYEHOO wheels are not merely replacements—they are enhancements, quietly elevating the ordinary into something dependable, enduring, and unexpectedly satisfying.

Wow! it was like night and day switching from the custom casters to these. The product FEELS and LOOKS sturdy and well made. The installation was quick and easy, really toolless. Depending on the chair you are installing them on and the condition of the hole, you might need a bit more force to push them in place. The experience after the change is really great. Smooth, obstruction-less gliding. No marks on the floor, (a huge plus) You should even be mindful of your movement with these wheels, it is so smooth and frictionless that you could go too quickly. They really are soundless and smooth gliding on my tiled floor. The 3inch height caused me to lower my chair a bit, but that is really not a big issue. Overall, it's a great buy and a welcomed change to office chair functionality.

A must have upgrade for all office chairs, the wheels make it so smooth to roll and it doesnt damage your floor. Youll love it, BUy it

These worked great, I ordered a set for my office chair and my granddaughters gaming chair.

Excellent

I really like the comfort when I move around on the chair. The wheels are soft(er) so they are easier on the floor, much better than hard plastic "normal" office chair wheels. They do raise the chair height a little, but that why you have an air adjustment on the piston of the chair haha :) It's less noisy and the bearing on the wheels seem actually very good.

They fit just like stock. No noise. Rolls so smooth love these.