TP-Link AC1200 Wireless Gigabit Access Point Desktop Wi-Fi Bridge MU-MIMO & Beamforming Supports Multi-SSID/Client/Range Extender Mode 4 Fixed Antennas Passive PoE Powered (TL-WA1201)

very nice product i used it as a range extender to boost my wifi signal working very good

توزيعه للشبكة ممتاز قوي وسهل في الإعداد وحتى الآن مفيش تقطيع بالشبكة

Excellent WiFi coverage with 4 antennas. I was facing issue for not getting signal after a wall. This AP solves the problem. Ordering again today.

Working well so far. Connection stays stable and strong

very good item

Good product with 4 Fixed Antennas

إشتريته من يومان فقط . سوفت وير منتهى الغباء . سوفت وير ليس به اداه تحكم نهائيا . لا انصح به

This product is very good for extending the WiFi power

Werkt heel goed

I like this Access Point, it looks like a little alien space ship on top of my DVD tower. I have installed 3x APs in the past and a couple of them were very frustrating to setup. The most annoying requirement was to use an unusual I/P address e.g. 192.168.2.2 This requires re configuring your laptop/PC to match this unusual I/P. With this AP there are no such horrors, you can access the setup page from a PC using Ethernet or WiFi using a laptop or smart phone. it uses the addressing format used by most homes i.e. 192.168.0.XXX The ID and password are on the bottom of the device. Mine I/P was 192.168.0.160 Change these to suit but make sure you write the new details down. You need 2x sets of passwords 1. A user name and password to get back into the setup page. 2. An SSID and a password to enable encryption. The setup menu was very easy to use and worked without any issues. As well as SSID and password you can also select the channel to use for WiFi to avoid conflict with the router WiFi 2.4Ghz and 5Ghz can be separated and given unique SSIDs if necessary. There is also an option for a "Guest SSID" If you do forget the new passwords, reset with the button on the back and start again. Once set up connect the AP to the router via Ethernet cable and you are ready to go. The listing says that the AP supports passive PoE which I've never used and wasn't too worried about. I was pleasantly surprised to find that a tiny PoE injector was included. An Ethernet cable contains 8 wires forming 4x sets of twisted pairs. These are used to send and receive data simultaneously but not all of them are used. PoE sends power to the AP along 2 of the unused wires. This gives you 2 options. Plug the supplied PSU into the AP, the usual method. Plug the PSU into the small PoE adapter. Plug the Ethernet to Router cable into the socket marked "LAN" (Local Area Network) Then plug an Ethernet cable into the adapter socket marked PoE, the other end going into the AP. This made it very easy to mount my AP in the sky on top of a DVD tower with just one Ethernet cable. The supplied PSU lead was not long enough to reach that far. Very pleased with this Access Point 11/7/26 Update I use Powerline adapters to connect to this AP and out to my shed where another wireless AP manages 6-8 IP cameras. I also had temporarily 4 cameras connecting to this AP. I started to "loose" a camera but only when I was using my phone. Google search came up with some suggested changes to the AP settings. I did some changes to the AP settings as suggested by the AI. I normally access APs using my PC. After making some changes I was suddenly unable to access the AP anymore and left it for another day. A day or so later I realised that my phone had stopped connecting to the AP but rather oddly some cameras were still worked fine. I could not connect to the AP via ethernet using a PC, I tried 2 of them. I reset the AP 2 or 3 times no response. I then tried to connect using WiFi and it connected. What seems to have happened is the AP had got locked up mid change to the settings. I had an "allow items" list that contained a few things like my cameras but not the phone. The IP had been reset to none. I made the necessary changes to settings and now all works as it should. Very strange that the Reset button did not work. If you find yourself locked out via PC and Ethernet, try accessing by Wifi It uses the SSID to connect so no IP is not a problem to the AP.

Excellent item delivered very quickly. Very easy to set up.

Good Quality!

Het toestel werkt perfekt, met een goede dekking van het volledige huis.