Airthings 2960 View Plus - Battery Powered Radon & Air Quality Monitor (PM, CO2, VOC, Humidity, Temp, Pressure)

I have had this unit for almost 2 years now, I will buy another. It literally saved my life! If you work from home, like I do, then you need this unit or something like it. I had Radon levels above 7pCi/L and had been living with it without knowing it, for almost 3 years. For those that don't know, Radon is a radioactive breakdown of uranium, thorium, or radium in rocks, soil, and groundwater. The CDC and EPA claim that levels above 4pCi/L are considered highly toxic and proper mitigation should be taken to reduce the levels. This is why Radon mitigation systems are installed in nearly every home across the United States. If you don't know, educate yourself about Radon and understand that radon causes over 21,000 lung cancer deaths in the United States each year and 2,900 of those deaths are people that have never smoked a day in their lives! For me, every now and then, I would cough and a small spat of blood would sometimes appear and i could never figure out why... Now, do you NEED this system? - Absolutely not, there are plenty of radon detectors out there and they are pretty cheap. Why do I recommend this system and why did I choose it? - Historical Data: This bad boy tracks all of your air quality metrics over time. This is extremely important when you want to understand cause and effect in anything in life. Many of the "bad reviews" talk about how some of the metrics displayed are inaccurate when compared to another device that specializes in one or many of the metrics this unit does display. Accurate comparisons only matter when comparing against a controlled environment and are purely for the sake of argument. This is important to understand because no unit needs to be 100% accurate, it just needs to be accurate to itself so that when you make a change, you can properly see that the change is affecting the metrics in a way that makes sense for what you meant to accomplish. For example, I had high radon (the value of the metric didn't matter other than the fact that it is higher than 0... it's radioactivity, is anything above 0 TRULY acceptable?) When I installed my radon mitigation system, I could watch my Radon levels drop tremendously over time, which proved that my radon mitigation system was actually working as expected! Also, I haven't had any spots of blood appear when I cough... I call this a success. - Dashboard: Airthings has a nice application and semi-customizable dashboard which makes viewing really easy to do, and from anywhere in the world. When my pets are home while the family is away, I can notify my neighbor to open a window to let some fresh air in, while we're away. - Alerts: Always cool to have alerts so you don't even need to "monitor" the metrics. Fun fact, CO2 builds up pretty rapidly in a well-sealed home. When you go through insulation techniques to seal off cracks and crevices to improve your HVAC efficiency in the thermal zone, it is easy to forget that CO2 has no easy escape. Needless to say, this little guy alerted my phone and I was able to crack a window and keep my family safe. I later installed a fresh air intake on my HVAC system and again, could watch the metrics historically, as they fell to a more than acceptable range, yet again proving that my air intake installation was actually doing its job. I hope this helps anyone looking to decide on this purchase. It has been an absolute godsend to have in our home and I didn't even get into some of the other things it helped me solve that had been plaguing us.

Tl:dr I recommend this product. I believe that it is currently the best on the market and provides a good array of sensors for the price. I have not received any financial or other consideration for this review. I have no connection to the company. Details, positive and negative, are found in the review. Intro: In operation (after 7-day calibration) for three weeks beginning October 2021. Unit is located indoors in the bedroom of a small single-story home in northern California. I purchased View Plus after an online evaluation of competitive units. The purchase decision was based on the array of sensors, acceptable display of sensor parameters, appearance of a good user interface, ability to easily download the data in Excel .csv file format, designed in Norway, and assembled in Tunisia (visible in product photos). I expect that this is the first product that I’ve ever owned that was assembled in Tunisia. There were no Amazon reviews as I purchased the unit as soon as it became available. My primary motivation for purchase was to measure indoor particulate pollution during the wildfires. I wanted a more quantitative measure than the colored indicators on our air purifiers. However, I have since become more interested in the carbon dioxide (CO2) and VOC levels. The inclusion of Radon, temperature, humidity, and atmospheric pressure sensors is a plus. Particulates: I have had an extended conversation with Airthings via the app. They are responsive, although it may take a few days or even a week, if you ask technical questions as these need to go to the engineering team. As this is a consumer and not scientific device, there are cost limits on the nature of the particle sensor. Airthings does calibrate the particulate sensor to a scientific instrument. However, the Airthings sensor is most likely not able to distinguish between different particle size and scattering distributions that give the same overall signal. I had plans to do a cross correlation study with a scientific instrument, but circumstances conspired against me. At this time, I am satisfied that Airthings has done enough work that the threshold limits (green <10, yellow <25, and red >25 µg/m3) for the PM 2.5 sensor are reasonably close to the equivalent limits used by the US EPA and European PM 2.5 AQI. For the data that I’ve collected, there is very little difference between PM 2.5 and PM 1 signals. I have not investigated why. One caveat is that the data collected so far has an average PM 2.5 and PM 1 values of only 2 µg/m3 and only a single peak greater than 25. Since the rains have (finally) come, I don’t expect to have the opportunity to check against more polluted air conditions in the near term. Carbon dioxide: This provided the most surprise about the conditions in our home. I found that ventilation in our bedroom is insufficient to keep levels in the green without the window(s) being open at night. I am looking into ways to ameliorate this problem when keeping the windows open is not an option. When I first received the unit, I placed it outdoors to see if it would read the expected value of about 400+ ppm for average CO2. The unit read about 550, but it was before the 7-day calibration was completed. Over the course of the past month, when the room was well ventilated, I observed readings as low as 469 ppm. The unit will show the increase in CO2 when either 1 or 2 people are in the unventilated room for any significant period of time. VOC (volatile organic compounds): The measurement is in parts per billion, ppb. This is my first experience with VOC data recording. The unit is certainly responsive and exhibits significant signal when we are cooking, especially frying. As there are many different types of VOC, I cannot comment on whether one should take significant actions based on the results in the home. Do fry-cooks have career related health issues? At a work environment, such as an organic chemistry lab, there may be many types of VOCs that are clearly harmful to health. Radon: All the values that I have recorded are below the green threshold limit of 2.7 pCi/L (picocuries per liter). The average value over 2000 measurements is 0.7 and has a standard deviation of ±0.4. Temperature: Comparing the value to household sensors indicates that the temperature displayed by the Airthings sensor maybe between 1- or 2-degrees F high. However, I consider that within measurement error for accuracy given the nature of the other sensors. Precision appears to be excellent. Relative Humidity: Comparison only with household sensors. Appears to be within a few percent. Atmospheric Pressure: Excellent agreement (within 0.5 mBar) with external values (local weather data). Range of data recorded between 1001 mBar and 1022.5 mBar. User Interface (Unit): There is an E-Ink type display that is not illuminated. This is a very low power display and conserves battery. No power used to maintain the current display reading. It has high contrast and easy readability. You can choose 2 sensors to display via the app (Phone or PC). When you wave your hand in front of the unit, it indicates its assessment of the overall air quality (good, fair, or poor) and shows any of the readings that cause a fair or poor result. It then returns to the standard readout. I have not found the lack of illumination to be detrimental. User Interface (Phone): I’m using a Samsung Galaxy A51 with Android 11. The software allows you to choose among several devices that you might have. As I have only one, it displays a summary that is in the attached photo. You can then tap “VIEW IN WEB DASHBOARD” to get graphic displays for different periods of time. You can choose to get notifications via the app, if values exceed the Airthings recommended thresholds. You can choose the sensors for which to have notifications sent. These thresholds cannot be changed. I think it would be good to be able to change the thresholds with the understanding that one is responsible for the values used. User Interface (PC/Web): I’m using an Intel-based PC running Windows 10 Pro and MS Edge for this unit. See attached photo. The graphing is generally quite good. I’d prefer to be able to choose the order in which the different sensors are displayed. It might be possible to do this by deleting sensor graphs (called tiles) and then adding them back. I’ve not tried that. The vertical scaling is automated and determined by the range of values of the data being displayed. The scale cannot be changed, but you can zoom using touch, if your computer/phone has that capability. Adding the historical data (not shown in the photo) will expand the vertical size of each graph and give the minimum and maximum value for the data range. Bug: You can add a tile for the outdoor weather, but only for Oslo, Norway! They have given me instructions for changing the location, but the software for the View Plus is not the same as for the software shown in the instructions. I have made them aware of this. It is unclear to me whether they can and will offer software updates. Downloading Data: The .csv file contains the time and sensor data for the entire time the system has been recording for that location. If I don’t do something to re-start history, the data file will eventually grow to unmanageable size. They should allow you to specify the range or use the range chosen for the graphing display. The file name is also fixed as the serial number of the unit. These are serious limitations given the extra work caused for the user, I consider them bugs. The data are separated by semi-colons, so converting from text to columns in MS Excel is easy. The data are recorded with a UTC time stamp. Since I’m in California, it is easy enough to subtract 7 hours and put the local time in the next column. The headers have a few character-conversion bugs: “μ” instead of “µ.” The character “” is inserted in the Temperature column header. These are minor. The date/time format is 2021-09-30T20:04:28. The “T” separator is a nuisance and prevents Excel from recognizing the form of the data. If they would replace the “T” with a space, then Excel would have no trouble. I use the replace function to do this. Again, it is no big deal, but should be a simple fix. I have made Airthings aware of these bugs. I will append this review, if I find additional information that may be pertinent to other users. I hope this has been helpful. Appendix 1: I've added a comparison of the PM2.5 data from the Airthings View Plus (indoors near an open window) to Purple Air data from an outdoor sensor (not mine) about 100 meters from my home. The Purple Air data are shown in the US and European scales. The data are for the 24 hours of October 29, 2021. Correlation is excellent for the main peak.

Purchased Airthings Plus ($299). Worked great monitoring air quality in a fully finished basement where our teenagers spend time studying, watching tv, and having sleepovers. Out of the blue the device just stopped working. Screen displays horizontal black lines as shown in picture. I think Airthings pushed a software update that completely bricked the device. Called support and after practically zero troubleshooting, basically asked to replace batteries, they told me to buy a new one with no explanation. They are not standing by their product at all. Highly disappointed as I think they broke it with an update they pushed. UPDATE - March 2028 I have to admit that it is not often a VP of a company contacts you directly to address a problem. Airthings did exactly that and replaced my Airthings Plus with the latest model and software. VERY satisfied with the service and how they handled my situation. The new unit has been operating flawlessly since December 2025 when they sent me the replacement. We also had some work done in the basement over the winter and it was great to monitor the VOCs before letting the kids back down there. With this monitor we were able to see the spike and monitor air quality until it was back in the safe zone (about a week). Love knowing that my kids are safe and not being exposed to VOC, Radon, etc. Thank you Airthings!

I love this product. It was very easy to connect to wifi and to have the ability to track PM2.5,TVOC, radon, temperature and humidity all on one unit is very convenient. I bought a second unit to monitor the downstairs as well. As far as accuracy goes, it seems to track PM 2.5 closely to our outdoor conditions so I am happy. It is still too early to tell on radon but am doing a 3 month traditional test that will be completed later this spring so I will be able to compare. One benefit is that I can shut down air purifiers (saving filter life) when conditions dictate. Also, as CO2 or TVOC levels increase, I am able to start ventilating. Amazing to see the spikes in PM2.5 with cooking. Anyway, great device with excellent data stored for analysis. I love it.

Nice product

Ich habe mittlerweile schon 4 Airthings View Plus Sensoren daheim und bin sehr zufrieden damit. Sie machen einen sehr solide verarbeiteten Eindruck und meiner Erfahrung nach erzeugen alle Sensoren sehr vergleichbare Messungen. Die Einrichtung war kinderleicht. Die Integration in ein Home Assistant Heimautomatisierungssystem funktioniert ebenfalls völlig problemlos. Besonders schön ist auch das e-paper basierende Display, welches man prima ablesen kann und zusätzlich sehr stromsparend arbeitet. In einem Fall hatte ich einen defekten Sensor. Keine Stunde später hat der sehr freundliche Support bereits geantwortet, ein paar Lösungsvorschläge gemacht und als klar war, dass es ein physischer Schaden war direkt die Zusendung eines Ersatzgerätes veranlasst. Ich bin sehr zufrieden und kann das System nur empfehlen.

Permet de connaître la qualité de l’air à l’instant t et de réagir en cas de données qui ne seraient pas bonnes .

i've used this for a few months. its very good and accurate enough for home use. kept in kitchen. display is good. batteries first installed 9 months ago and still going strong. app is also good and informative for current and historical readings. worth the cost.