Klark Teknik MIC BOOSTER CM-1 Dynamic Microphone Booster with Preamp

With some low output dynamic microphones I found that I had to have my interface/camera gain turned near maximum to get a usable signal, which produced background hiss. With this unit installed inline It offers about 20db of additional signal boost, with very little noise, so I now can turn my interface gain down and have plenty of signal to work with - the overall effect was a strong signal with a much lower noise floor. Be aware that you do need to enable phantom power (+48v) in order to power this signal booster and the phantom power is not extended to the connected microphone so it does not work with condenser microphones, which rarely need a signal booster anyway. The CM-1 signal booster is well made, sounds good, and is a great solution if you are struggling with getting enough clean signal from a dynamic microphone. It's a great value, works as well as the more expensive devices, and highly recommended.

I'm giving the Klark Teknik MIC BOOSTER CM-1 a full five stars. This little device has made a significant improvement to my streaming and podcasting setup. Likes: The CM-1 provides a very clean gain increase, and I've noticed no discernible added noise levels to my microphone signal. This clean gain is essential for professional-sounding recordings and streams, ensuring that my voice is clear and free of unwanted hiss. The build quality is also excellent; it's made of metal, has a good weight, and feels very solid and durable. Usage: I use the CM-1 with a Rode PodMic and a Wave XLR interface for both streaming and podcasting. It allows me to get a strong, clear signal without having to increase the gain on my Wave XLR to very high levels, which can introduce unnecessary noise. Conclusion: I highly recommend the Klark Teknik CM-1 to other streamers and podcasters who want to avoid introducing unwanted noise by overdriving the gain on their audio interfaces. It offers excellent performance at a very reasonable price, making it a great value for streamers and podcasters looking for a clean gain boost for their dynamic microphone. This is a fantastic and affordable solution.

Edit: This booster requires +48V phantom power from your audio interface to work. I’ve seen a couple reviews saying it didn’t work out of box, and mine didn’t either until I activated phantom power from my UM2. Without the +48V power, your mic will still work, but audio from it will be unchanged or possibly even a little quieter because of the added impedance (I assume. I’m not an audio expert lol) I’m using an Audio Technica AT2040 and Behringer UM2 usb interface. Before getting the CM-1, I had to set the UM2’s gain to 80 or 90 percent to reach good vocal levels. It wasn’t terrible, but I found the UM2 would introduce some static/noise at these gain levels and trying to remove it in post would result in robotic sounding vocals. With the CM-1 added in-line, I can now keep the gain well below 50% and get usable audio without the noise. There is still some noise, probably because I’m using cheap xlr cables, but with the booster is much easier and cleaner to remove in post. If you don’t want to invest in an expensive interface for your dynamic mic, this booster will get you much cleaner audio for a fraction of the price. Would recommend 👍🏼

I'm Very Pleased ! I agree with the general consensus that this is a very affordable alternative to similar (higher priced) mic boosters. Most importantly, the gain was as advertised (~29db) ! There was no noticable added noise floor, but there was a brief squak of interference. I had my cell phone and PC running nearby, and I didn't pay much attention to my mic cable layout. I think I will be able to avoid interference by putting a little thought into the layout of the cables and placement of the booster.

WORKS AS DESCRIBED. GOOD PRODUCT

Using this with a Vocaster One interface + Rode Podmic, the 70dB of the vocaster one I feel like was still not enough for my podmic, I had to literally crank it almost all the way to max so my voice sounded loud and clear. With this I can now set my gain at around 60-70% on the vocaster hub software and sounds louder and better this way. This product seems well built and is recommended over more expensive alternatives *Cough* Cloudlifter for like 150$.

Worked as described no problems Well worth the price well built Quit happy with the overall product and the quick shipping. Would purchase it again.

جودة عالية جداً وبديل ممتاز لل كلاود لفتر

I gave it the ol' "How can I make it fail" test and it passed, no issues. Provide phantom power to the CM-1 and it comes alive to jive Clive 25... db that is, of clean, noise free gain for your ribbon and other low output dynamic mics. Nice price.

Perfect for home studios where you use a dynamic mic but don't want to break the bank.

started making a screeching noise after 2 weeks of minimal use

I recently upgraded my audio setup from Maono AU A04 and I am using this Mic booster with Rode Procaster and Focusrite Scarlett Solo and I can say that for the price it is similar to Cloud Lifter, I haven't tried CL but from the YouTube reviews I have noticed that there is not much of a difference, the product is amazing and provides clean gain to my mic. If you are looking for YouTube and podcasts, you can definitely go with it, because at the end of the day, your actual audio will be compressed by YouTube so it doesn't make sense to buy Cloudlifter for double price. If available I would say go with Triton Fethead or SE Dynamite as with those you can eliminate the need for aditional cable. The only con is it costed 6,628 while the original price is around 2,300 even after adding 30% excise and around 1,000 rupees for shipment, the seller made a profit of 2,900. Is it worth the price? Yes Are other alternatives easily available? No Any other product at this price range? Abolutely No