Polymaker PLA PRO Filament 1.75mm 1kg, Tough & High Rigidity Grey 3D Printing Filament, PolyLite PLA PRO 3D Printer Filament 1.75mm, Print with Most 3D Printers

So to start off, this 3D general FDE polylite PLA pro is pretty amazing and I’m about to buy my 3rd&4th rolls. Dimensional accuracy is slightly better than .05mm where I checked but I didn’t take pictures of my gauge and only checked twice during 1 long (34hr) print about halfway through the roll. It’s got great properties all around, including both impact resistance and rigidity. It’s flexible but still very stiff. I haven’t tested the heat resistance, although it’s not something I’m terribly worried about. It’s super easy to print with and it prints really well with great layer adhesion, some slight warping on steep overhangs and really thin areas if you don’t use fans. I used 30-50% fans and printed relatively slow for anything too crazy and was virtually warp-free. I probably could’ve printed faster tbh but I prefer quality over speed. (The brace and hand stop were printed on an sv06 using the default prusaslicer speed settings with default dynamic overhang speeds and fan at 40% bridges at 100% and they printed perfectly. The only time I had any stringing at all was about a week into using the roll without drying it. I dried it for 6hrs at 55°c in a sunlu dryer box and it was good to go again. So I do recommend keeping it dry or drying it periodically, as it shows more hydrophilic tendencies or symptoms than other PLA plus filaments I’ve used. It has an incredibly awesome matte/flat finish that’s really hard to get with most other PLA plus filaments (that’s probably my favorite feature of this filament tbh), and the color is really great although it’s more of a desert tan than FDE in my opinion. I guess desert tan could be considered a shade of fde these days with how many different shades there are lol but it’s fairly light. All in all it’s absolutely awesome and I’ve almost completely switched over from eSun (except for a couple amazing colors that eSun does best like the olive green *chef’s kiss* and their grey is awesome too). Still giving 5 stars even tho I wish the color was more of a true FDE. Can’t beat the printability or material properties. And that matte finish tho 🤌👌

Very nice PLA. This is my first time printing with this PLA. I am very pleases with the performance of this PLA. Shipping was fast and it was packaged well. The spool was tightly wound with not tangles and worked smoothly on my Prusa MK4S machine. I used standard PLA settings and the prints came out perfect. Was very happy with the quality of the prints. I really like the dark Gray color as it match my bike perfectly. Will purchase again.

I've been using Hatchbox PLA, eSUN PLA+, and ELEGOO Plus for the last few years, but I saw a few posts on reddit saying how much better Polymaker PLA Pro is and decided to give it a try. I'm happy to say that the hype was well-deserved. It's by far the best filament I've ever tried. I primarily print small D&D minis with my Ender 5 and when I compare a mini made from Polymaker PLA Pro vs any of the other brands I listed above, the Polymaker PLA Pro minis are stronger with less stringing and a little more detail than any of the other options. The layer adhesion is notably better with a much smoother and clean finish. Because the layer adhesion is so strong thin parts that usually bend or break during printing come out clean and strong. For me, that means I can print minis with thin legs or small tools and they not only come out looking great but have enough strength to be handled. Many of my minis have scales or chainmail and other tiny details that used to be washed out, but now all the small details are there. Some minis have spears or sharp spikes and those used to come out slightly rounded and blunt, using the playmaker they come out so sharp I have to dull them a bit. Usually, I print minis at 130% size so all the details come out, but with this filament, I can print them at their standard size. This saves me a ton of time and filament and the minis are still stronger and less brittle than the other brands I've tried. If I'd known how much better my minis would be I would have been buying this stuff from the start. It's slightly more expensive, but it quickly pays for itself when you have no failures and your prints are strong enough that they don't need to be reprinted. I'm not sponsored or anything, it really is that much better and has really upped the quality of my minis. 10/10

The Polymaker PLA PRO 1.75mm filament prints smoothly and delivers parts that feel tougher than standard PLA. Layers bond well, overhangs print clean, and the finish has a consistent matte look that gives projects a professional appearance. It feeds reliably without tangles or jams, and I’ve had consistent diameter across multiple rolls. Prints hold up to stress better than basic PLA, making it a good choice for functional parts and prototypes. I’ve used it regularly for business production, and the quality has been dependable with every order. It works well with Bambu Lab A1/P1S. Sealed in an airtight bag with a desicant inside. Ready to print, no need to dry before printing. Great value for the price!

A nice rich dark grey color, I've printed multiple colors from the PLA Pro selection, but I do think this color might need a slight change of settings, probably 225c. I usually do 220c, 60 bed with default settings on a x1c and noticed this one acts a bit different especially on rounded pieces with a slight overhang, the seam gets ugly, like blobs forming only around the seam. So I'll need to figure out the settings. Besides that, if I use any other color, such as the Army Green, it prints flawless with the settings I used for the dark grey. I'll still use it and plan to order more, just need to figure out the right settings

Mat yapısı ve kalitesi çok başarılı, sağlamlık anlamında da çok başarılı olduğunu söylemekte fayda var.

I've been printing with this filament for about 4 days, only stopping to remove the prints and reglue the beds on my printers. I've gone through about 3Kg on a stock ender 3 pro and an upgraded ender 3 pro with a glass bed and roller spool holder. Here are some of my opinions and observations on this filament. 1. Accuracy with material. First off the accuracy is amazing. I was able to print 1mm poles for a very detailed model. Not only did they print on an angle but they came out clean with very little underside droop if any. 2. Temperature for printing. I dont have the best insulated house and Temperatures have fluctuated pretty severely during long prints, yet the prints come out perfectly. I dont recommend it but if your house gets very cold when you don't have the heat on. your print will likely come out fine. 3. Print lines and over all surface finish Compared to other popular brands like everyone or other cheap Amazon recommended filaments, this stuff comes out with 0 bubbling or post extrusion expanding (like when the top of your print comes out looking like a hand file) the top and bottom surfaces are prettymuch perfect. As for the print lines, man damn they are nice. At .2 layer height and 50mm speed on my ender 3 pro it looks good enough that I don't bother sanding anything. There aren't and random blobs coming out the side and very little strings if any. 4. Print settings. You can download the newest version of cura, throw a model on and send it to the printer, or you can make custom print settings that took you weeks to make perfect. Either way, you're going to get great prints. 5. Cons The cardboard spool can get caught on the spool holder a little bit on a stock ender 3 pro, but on my other machine that has a roller, its a non issue. Over all this filament is going to be my go to, And by far outperformed every filament I've ever used by a large margin. 10/5 would recommend. I wish I could give it more stars.

La qualité Polymaker, jamais déçu! Le packaging est soigné, le bobinage est contrôlé. Au top dés la première impression sur mon Ender3 V2. Bed 60° et Buse 215°. PLA Pro parfait pour les pièces techniques. 10/10++

Lässt sich sehr gut drucken, gleichmäßiger Fluss und kaum Verzug. Oberfläche wirkt sauber und die Farbe ist schön tiefschwarz. Für den Preis absolut empfehlenswert.

ミリタリー用品の製作に購入しました。 一般的なDEより薄めでした。 値段が高いのが難点。