Mudder 28 Pieces 3 Pin LED Connector LED Strip Connector 10 mm Solderless LED Light Connector L Shape LED Lights Extension T Shape Solderless LED Adapter Connectors for WS2811 WS2812B SK6812 LED Strip

Funktioniert wie es soll. Leichte Handhabung. Empfehlenswert.

These connectors seemed to be fine for the job, unfortunately they didn't work with the strip lights I had (I knew this may have been the case when I bought them) Not a fault of the connectors.

just recently finished up my latest PC build and got a set of LED light strips (Amazon ASIN B08GSCJPMD) for accents inside the case. The LED strips were longer than I needed, and I wanted a cleaner install than 12 inches of loose wire at the junctions for that kit. So I got THIS kit of ARGB 3-pin couplers. The short story: These work! I got my LED strips mount around the inside of the window in my case. I recommend using a powered ARGB hub. The long story: Your motherboard probably doesn't put out enough power to properly run a LOT of LED lights off of a single ARGB plug. I ran into a problem when installing my LED light kit and using this couplers kit. The further along I got, the less the LED's worked properly (I did have a 24-cable motherboard extension kit as well). But the LEDs were doing weird things... They would not light up the correct pattern the AURA software was sending, and the LED strips pretty much wouldn't work after the 2nd junction with these couplers. It's as if they weren't getting enough power. And after a couple hours of trying to make it work using different coupler pieces, trying to modify them thinking it was bad connections (based on some other reviews here), I finally came to the conclusion that they just weren't pulling enough power through the motherboard 3-pin ARGB plug - and I have a brand new ASUS Hero VIII mobo! I finally decided to get a powered ARGB hub (Amazon ASIN B08T1SM5CW) as those draw power straight from the power supply and the only control signal from the motherboard. BINGO! Now with the LED strips and LED mobo cable plugged into the hub and powered by the power supply, all the lights worked perfectly as they should! And all the junctions I used this coupler kit for worked great! Overall these worked great for me. I suspect that others that have issues may be running into a POWER issue, not a connectivity issue. I did make sure the click the white covers down very tightly so they stayed closed. These get a recommendation from me.

Excellent produit facile à utiliser

The pins dont allign with the ws2812b connection points. Either the gnd and the data pin, or the 5v and the data pin make contact but never all three. Worthless product