Peak/HERCLNR HALB15 HERCULINER Aerosol Bed Liner

Absolutely worthless bought two cans and they were both defected I wouldn’t recommend it tbh

Good quality as described

I preceded use of this product by trying the rustoleum brand spraycan bedliner, suffice to say the product quality and performance was beyond awful.That experience was a complete was a complete disaster, so I had a good comparison point. To begin this product was fresh in the rattle can and mixed relatively easily. The product appears to be under a higher pressure than regular spray paint, so nozzle effort and strength of the spray streak are noticeably higher. These leads to my first observation that due to the higher pressure, and the relative close focused spray pattern, it takes a bit of effort not to deposit too much material, which can lead to a run, and it also makes getting a uniform appearnnce as to the gloss of the final finish. The product would be better served with a nozzle that produced something similar to the fan pattern of a spray guy. That would facilitate getting more even coverage, especially on the final coat. I was coating a part for appearance, so this was more important to me. I managed to get an acceptable result but it was a little too touch and go for my taste. Obviously the spay gun applied method would solve these 2 problems, but I just had a dashboard to cover. The texture is prominent and even, and the finish is much closer to gloss than flat, a true semi-gloss, or semi-matte finish would be nice as an option. The product dries quickly and looks very good with the above caveats. Certainly it was like night and day as regards comparison to the Rustoleum product; this Herculiner allowed me to realize what I had envisioned for the restoration of an old series 3 Land Rover dash pad. I would recommend this product

Put this on my new holiday trailer as the paint the manufacturers use may as well be water, they are super cheap. So I lightly sanded the entire front of my trailer, taped everything off and used this [no primer needed], and the results are excellent. This is pretty tough stuff and with proper prep work, will last far longer than the super cheap paint used by the OEM's. I did have a bit of sputtering from the nozzle half way through the project but I stopped right away, cleaned the nozzle and reshook the can with no issues afterwards, coulda just been some gunk. No other issues, no runs, etc. I let it bake in the sun when I was done but that has no bearing on the product. I kinda wish it came in a larger aerosol can but the product inside is excellent.

Excellent coverage. Used to recoat bed. Came out perfect.