MXBAOHENG Mini Precision Table Saw for Crafts & Model Building - 96W 7-Speed Hobby Saw with 1/2" Adjustable Cut Depth, Hobbyist Table Saw for Wood/Plastic/PCB Cutting, Includes Chuck & Sanding Disc

Loving this little table saw. Great for small detail work. Has trouble with thicker pieces and harder woods, but once you know its limits it is a great little tool.

First off, this little thing is adorable, and perfect for the crafter or hobbyist; it works as it should and cuts smoothly. Right off the bat though, there are two issues: 1) make sure you don't have the blade height as high as it will go. I did that and the motor kept pulling, stopping, and going again. Upon inspection, there's actually no stopping point from the belt to the underside of the table top, so the belt was just rubbing away on the bottom of the saw table. Refer to the picture- on the left of the machine, if you can see the light then the belt is good, no need to take the table off every time you adjust. 2) The wing nut is too big to tighten the angle ruler on a 0 degree angle. Technically that's not a real problem, as you can build a jig or fence to give yourself whatever sized pieces you need, but still, that's something that was overlooked in the design. Overall though, I still give it 4 stars for what it is. I plan to make gifts as coasters, trivets, and probably christmas ornaments as gifts with this. Second pic is a tic-tac-toe board I made out of scrap pallet wood while testing this out.

This tiny table saw is exactly what I wanted. I Scratch build terrain and features for TTRPGs and was hand cutting wood pieces. I am a poor "cutter" and have been unhappy with the inaccuracy of my pieces. After reviewing many of these mini saws, i got this one and so far it is perfect. It even has an arbor for adding a sanding pad to. I use it to cut popsicle sticks, small diameter dowels and other small pieces generally between 3/8" and 3/16" sizes. This cuts them cleanly with no binding or dragging.

The saw came well packaged. I runs great. As another review mentioned, the hose doesn't fit and has to be scrunched, the only reason for 4 stars. It cut 1/4" poplar with extreme ease.

I love this little table saw. It is great for my craft projects. It is easy to use and performs better than I expected.Update: Had a small problem with this saw. Contacted the seller and they quickly sent the needed parts (plus extras) under warranty.I highly recommend this seller. Excellent customer service.

Yes, this is small, but does the job on small projects. I have used it with 1/4” poplar and it melts right through. Remember to insert kerf wedge when ripping!!! I love this saw.

Overall, pretty nice and seems like it'll work as intended. Better assembly instructions would be nice. Also, the drill chuck would not slip on the spindle as designed. Had to take a file to the spindle and run the motor to evenly remove material so that the chuck would slip on. The chuck will also rub on the table if you raise the blade to it's max height, which is noted in the paperwork to just "lower the saw blade". Not really a solution. Once again, I took a file and removed a bit of the table edge and solved this issue as well. If you're handy, this can be perfect for you. If not, you may be a bit frustrated.

Great little saw for for cutting thin wood used in building dioramas.