Mekar 27 Inch Laundry Stacking Kit Chrome Steel Fit for LG 27-in washers and dryers Replacement Parts (27 Inch)

De excelente calidad, fuerte y del tamaño justo y necesario para apilar la lavadora y secadora LG. Es de mejor calidad que el ofertado por la marca propia de LG México.

عندي غسالة 10 كيلو ونشافة إل جي وركبتهم فوق بعض بسهولة والحين شغالين بدون اهتزاز اهم شيء وقت التركيب تتأكد من توازن الغسالة وبعدها تركب النشافة فوقها ، التركيب سهل لكن يحتاج أكثر من شخص

Rather than pay $300+ for a new LG pedestal when we bought our LG dryer, we decided to mount the new dryer on the old (Frigidaire) pedestal. This kit worked well with a few caveats. If you're thinking of doing the same, maybe these tips will help you. Firstly, this is a sturdy, well-made set of steel rails with no sharp edges. It has predrilled holes where it should align with an LG washer. However, we didn't use it on a washer so the predrilled holes didn't line up with anything on our pedestal. Secondly, the side-to-side measurement of the pedestal needs to be exactly 27". You may have 1/8" or 1/4" wiggle room, but don't count on it. The depth (front to back) of the pedestal is less critical, but the kit rails may protrude over the front of the pedestal. The official LG pedestal is eactly 24.4" from the back to the drawer opening. The drawer is another 2.5" thick. In my case, our pedestal is shorter, so the side rails protruded past the drawer opening, but doesn't affect the mounting. The drawer still works fine. This kit only uses 2 screws for the side rails, one for each rail. Each side rail is screwed to the back of the pedestal/washer, a solid connection in the back. In my case, there was no mating hole for the rail to screw into, so I had to drill into the back of the pedestal before attaching the rails. Not a big deal, but there were two layers of steel to drill through, so it took the right bit and a little time. One other caveat: the kit comes with a sticky pad on the bottom front of the rails to temporarily hold the rail in place in the front while you slide the dryer onto the rails. However, the sticky pad is very small and in my case, since the pedestal is shorter than the rail, the sticky pad had almost nothing to adhere to. That makes the rails a little loose -- they are socked down in the back by the screws, but they were more or less free side-to-side in the front which made it a little tricky to slide in the dryer. Had I known about this beforehand, I might have used some double-sided carpet tape along the whole length of the rail to hold it in place. Once the dryer is lifted and slid on to the rails, the last step is to install a front rail that screws into the side rails. The holes are predrilled and the enclosed screws worked fine. That front rail simply locks the dryer front-to-back. Bottom line, this worked fine after working out the small kinks in the installation and we now have a working dryer mounted on the old pedestal. The kit is solid.

Works great. Cheaper than LGs version, and you can actually receive it in reasonable time. When I ordered the same item from LG, they sent me the wrong one, a fact that I unfortunately did not realize until the installers were already at the house. So, I sent it back to LG who then took weeks to reimburse me for their error. I immediately submitted a second, this time expedited order from LG. It never arrived and LG again took weeks to reimburse me. Fortunately, the Mekar stacking kit was available through Amazon and arrived with only a couple days wait. No complaints with Mekar. No complaints with Amazon. Huge complaints about LG. All that said, I love the large washer and dryer from LG.

Exactly what i needed for my LG ThinQ washer and dryer. Easy to install.