19mm Latching Push Button Switches SPDT ON/Off Waterproof Black Metal 12V Ring LED with Wire Plug (Red)

Like others, I bought this b/c of DIY videos for truck bed lighting with an LED strip. The switch I received had no wiring diagram and didn't match the colors of ChrisFix, but after studying the photos on Amazon and playing around, here's what I determined. (I put the notations from the Amazon photo in parentheses. This eventually made sense to me, but it doesn't have to. Just follow the colors.) hot/red from truck battery --- white (common) bed light (+) --- blue (normal open) and red (switch light +) bed light (-) --- black (switch light -) ground brown (normal closed) --- nothing ground to truck body (My led strip bed lights say you can switch the positive and negative, and either way works. Above is how I did it. I used 16 feet of "5630 Superbright Waterproof 300 LED Strip Light".) This corresponds to the "Program 1" in the Amazon photos. Where one wire connects to two, just solder/connect the three together. The result: switch is not depressed = no bed lights and switch is dark. Switch is depressed = bed lights are on and switch is lit up. Two weeks in, the switch is working great. Haven't tested any waterproofing. Good luck.

I got this for my 2020 Tacoma. Like I'm sure many did, they purchased this after watching a ChrisFix video where LED lights where installed on the bed. The colors of the wire are not the same as in the video. After some research and playing around, here's the wiring color set up; From Battery Red Wire to LED Red Black LED Wire to White wire on the switch Brown Wire on the switch to one of the magnet wires. If you watch the video, you should be able to do the rest. Once I figured out what wire did what, the rest was straight forward. I like the switch and it works well. I went ahead and I covered the extra wires with electrical tape and covered that with heat shrink.

...not overbearing. It can be wired in conjunction with power switching to light up, or otherwise as well. Solid switch, works perfectly, sturdy, solid spring/locking mechanism. All aspects, including decent gauge/type of wiring comes with it, fully worth the price, product is represented well... (Excellent) MblTchXprt

Fit perfectly in an existing hole in my f150. Easy access from behind the tail light made install cake. My only complaint is there was nothing to tell you what the wires were. I installed mine as follows: Black - Ground to chassis Red - to running lamp(I only want the led ring lit up if the running lights are on) Blue - black from bed light switch White - red from bed light switch Brown - nothing

Pretty good little button. I bought it not paying attention, thinking it was a momentary button but when I got it I saw it was a on/off button. If you barely push it, it will work as a momentary button. I got it to use with my air horn and sometimes I push it too hard and instead of a small horn toot it stays on and lets er rip but other than that, it’s a decent little button.